kernel.git/arch/powerpc/platforms/pseries/setup.c, branch linux-3.15.y

Merge branch 'linus' into sched/core

2014-02-21T20:37:09Z

Reason: Bring bakc upstream modification to resolve conflicts Signed-off-by: Thomas Gleixner

sched/idle, PPC: Remove redundant cpuidle_idle_call()

2014-02-11T08:58:24Z

The core idle loop now takes care of it. However a few things need checking: - Invocation of cpuidle_idle_call() in pseries_lpar_idle() happened through arch_cpu_idle() and was therefore always preceded by a call to ppc64_runlatch_off(). To preserve this property now that cpuidle_idle_call() is invoked directly from core code, a call to ppc64_runlatch_off() has been added to idle_loop_prolog() in platforms/pseries/processor_idle.c. - Similarly, cpuidle_idle_call() was followed by ppc64_runlatch_off() so a call to the later has been added to idle_loop_epilog(). - And since arch_cpu_idle() always made sure to re-enable IRQs if they were not enabled, this is now done in idle_loop_epilog() as well. The above was made in order to keep the execution flow close to the original. I don't know if that was strictly necessary. Someone well aquainted with the platform details might find some room for possible optimizations. Signed-off-by: Nicolas Pitre Reviewed-by: Preeti U Murthy Cc: "Rafael J. Wysocki" Cc: Daniel Lezcano Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-sh@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: Russell King Cc: linaro-kernel@lists.linaro.org Cc: Benjamin Herrenschmidt Cc: Paul Mundt Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/n/tip-47o4m03citrfg9y1vxic5asb@git.kernel.org Signed-off-by: Ingo Molnar

powerpc/pseries: Disable relocation on exception while going down during crash.

2014-02-11T00:24:47Z

Disable relocation on exception while going down even in kdump case. This is because we are about clear htab mappings while kexec-ing into kdump kernel and we may run into issues if we still have AIL ON. Signed-off-by: Mahesh Salgaonkar Signed-off-by: Benjamin Herrenschmidt

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

2014-01-28T05:11:26Z

Pull powerpc updates from Ben Herrenschmidt: "So here's my next branch for powerpc. A bit late as I was on vacation last week. It's mostly the same stuff that was in next already, I just added two patches today which are the wiring up of lockref for powerpc, which for some reason fell through the cracks last time and is trivial. The highlights are, in addition to a bunch of bug fixes: - Reworked Machine Check handling on kernels running without a hypervisor (or acting as a hypervisor). Provides hooks to handle some errors in real mode such as TLB errors, handle SLB errors, etc... - Support for retrieving memory error information from the service processor on IBM servers running without a hypervisor and routing them to the memory poison infrastructure. - _PAGE_NUMA support on server processors - 32-bit BookE relocatable kernel support - FSL e6500 hardware tablewalk support - A bunch of new/revived board support - FSL e6500 deeper idle states and altivec powerdown support You'll notice a generic mm change here, it has been acked by the relevant authorities and is a pre-req for our _PAGE_NUMA support" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (121 commits) powerpc: Implement arch_spin_is_locked() using arch_spin_value_unlocked() powerpc: Add support for the optimised lockref implementation powerpc/powernv: Call OPAL sync before kexec'ing powerpc/eeh: Escalate error on non-existing PE powerpc/eeh: Handle multiple EEH errors powerpc: Fix transactional FP/VMX/VSX unavailable handlers powerpc: Don't corrupt transactional state when using FP/VMX in kernel powerpc: Reclaim two unused thread_info flag bits powerpc: Fix races with irq_work Move precessing of MCE queued event out from syscall exit path. pseries/cpuidle: Remove redundant call to ppc64_runlatch_off() in cpu idle routines powerpc: Make add_system_ram_resources() __init powerpc: add SATA_MV to ppc64_defconfig powerpc/powernv: Increase candidate fw image size powerpc: Add debug checks to catch invalid cpu-to-node mappings powerpc: Fix the setup of CPU-to-Node mappings during CPU online powerpc/iommu: Don't detach device without IOMMU group powerpc/eeh: Hotplug improvement powerpc/eeh: Call opal_pci_reinit() on powernv for restoring config space powerpc/eeh: Add restore_config operation ...

powerpc/iommu: Update constant names to reflect their hardcoded page size

2013-12-30T03:17:06Z

The powerpc iommu uses a hardcoded page size of 4K. This patch changes the name of the IOMMU_PAGE_* macros to reflect the hardcoded values. A future patch will use the existing names to support dynamic page sizes. Signed-off-by: Alistair Popple Signed-off-by: Alexey Kardashevskiy Signed-off-by: Benjamin Herrenschmidt

powerpc: Clean up panic_timeout usage

2013-11-26T11:12:28Z

Default CONFIG_PANIC_TIMEOUT to 180 seconds on powerpc. The pSeries continue to set the timeout to 10 seconds at run-time. Thus, there's a small window where we don't have the correct value on pSeries, but if this is only run-time discoverable we don't have a better option. In any case, if the user changes the default setting of 180 seconds, we honor that user setting. Signed-off-by: Jason Baron Cc: benh@kernel.crashing.org Cc: paulus@samba.org Cc: ralf@linux-mips.org Cc: mpe@ellerman.id.au Cc: felipe.contreras@gmail.com Cc: linuxppc-dev@lists.ozlabs.org Cc: Linus Torvalds Cc: Andrew Morton Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/705bbe0f70fb20759151642ba0176a6414ec9f7a.1385418410.git.jbaron@akamai.com Signed-off-by: Ingo Molnar

pseries: Add H_SET_MODE to change exception endianness

2013-11-20T22:19:16Z

On little endian builds call H_SET_MODE so exceptions have the correct endianness. We need to reset the endian during kexec so do that in the MMU hashtable clear callback. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt

powerpc: Default arch idle could cede processor on pseries

2013-09-11T01:41:54Z

When adding cpuidle support to pSeries, we introduced two regressions: - The new cpuidle backend driver only works under hypervisors supporting the "SLPLAR" option, which isn't the case of the old POWER4 hypervisor and the HV "light" used on js2x blades - The cpuidle driver registers fairly late, meaning that for a significant portion of the boot process, we end up having all threads spinning. This slows down the boot process and increases the overall resource usage if the hypervisor has shared processors. This fixes both by implementing a "default" idle that will cede to the hypervisor when possible, in a very simple way without all the bells and whisles of cpuidle. Reported-by: Paul Mackerras Signed-off-by: Vaidyanathan Srinivasan Acked-by: Deepthi Dharwar Signed-off-by: Benjamin Herrenschmidt CC:

pseries: Move plpar_wrapper.h to powerpc common include/asm location.

2013-08-27T04:43:05Z

As a part of pseries_idle backend driver cleanup to make the code common to both pseries and powernv platforms, it is necessary to move the backend-driver code to drivers/cpuidle. As a pre-requisite for that, it is essential to move plpar_wrapper.h to include/asm. Signed-off-by: Deepthi Dharwar Signed-off-by: Benjamin Herrenschmidt

powerpc: Fix little endian lppaca, slb_shadow and dtl_entry

2013-08-14T05:33:35Z

The lppaca, slb_shadow and dtl_entry hypervisor structures are big endian, so we have to byte swap them in little endian builds. LE KVM hosts will also need to be fixed but for now add an #error to remind us. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt