kernel.git/arch/powerpc/mm, branch linux-3.8.y

powerpc: fix numa distance for form0 device tree

2013-05-11T20:53:50Z

commit 7122beeee7bc1757682049780179d7c216dd1c83 upstream. The following commit breaks numa distance setup for old powerpc systems that use form0 encoding in device tree. commit 41eab6f88f24124df89e38067b3766b7bef06ddb powerpc/numa: Use form 1 affinity to setup node distance Device tree node /rtas/ibm,associativity-reference-points would index into /cpus/PowerPCxxxx/ibm,associativity based on form0 or form1 encoding detected by ibm,architecture-vec-5 property. All modern systems use form1 and current kernel code is correct. However, on older systems with form0 encoding, the numa distance will get hard coded as LOCAL_DISTANCE for all nodes. This causes task scheduling anomaly since scheduler will skip building numa level domain (topmost domain with all cpus) if all numa distances are same. (value of 'level' in sched_init_numa() will remain 0) Prior to the above commit: ((from) == (to) ? LOCAL_DISTANCE : REMOTE_DISTANCE) Restoring compatible behavior with this patch for old powerpc systems with device tree where numa distance are encoded as form0. Signed-off-by: Vaidyanathan Srinivasan Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman

powerpc: Rename USER_ESID_BITS* to ESID_BITS*

2013-03-20T20:10:55Z

commit af81d7878c641629f2693ae3fdaf74b4af14dfca upstream. Now we use ESID_BITS of kernel address to build proto vsid. So rename USER_ESIT_BITS to ESID_BITS Acked-by: Paul Mackerras Signed-off-by: Aneesh Kumar K.V Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Greg Kroah-Hartman

powerpc: Update kernel VSID range

2013-03-20T20:10:55Z

commit c60ac5693c47df32a2b4b18af97fca5635def015 upstream. This patch change the kernel VSID range so that we limit VSID_BITS to 37. This enables us to support 64TB with 65 bit VA (37+28). Without this patch we have boot hangs on platforms that only support 65 bit VA. With this patch we now have proto vsid generated as below: We first generate a 37-bit "proto-VSID". Proto-VSIDs are generated from mmu context id and effective segment id of the address. For user processes max context id is limited to ((1ul << 19) - 5) for kernel space, we use the top 4 context ids to map address as below 0x7fffc - [ 0xc000000000000000 - 0xc0003fffffffffff ] 0x7fffd - [ 0xd000000000000000 - 0xd0003fffffffffff ] 0x7fffe - [ 0xe000000000000000 - 0xe0003fffffffffff ] 0x7ffff - [ 0xf000000000000000 - 0xf0003fffffffffff ] Acked-by: Paul Mackerras Signed-off-by: Aneesh Kumar K.V Tested-by: Geoff Levand Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Greg Kroah-Hartman

powerpc: Fix STAB initialization

2013-03-20T20:10:55Z

commit 13938117a57f88a22f0df9722a5db7271fda85cd upstream. Commit f5339277eb8d3aed37f12a27988366f68ab68930 accidentally removed more than just iSeries bits and took out the call to stab_initialize() thus breaking support for POWER3 processors. Put it back. (Yes, nobody noticed until now ...) Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Greg Kroah-Hartman

powerpc/mm: Fix hash computation function

2013-02-04T04:15:08Z

The ASM version of hash computation function was truncating the upper bit. Make the ASM version similar to hpt_hash function. Remove masking vsid bits. Without this patch, we observed hang during bootup due to not satisfying page fault request correctly. The fault handler used wrong hash values to update the HPTE. Hence we kept looping with page fault. hash_page(ea=000001003e260008, access=203, trap=300 ip=3fff91787134 dsisr 42000000 The computed value of hash 000000000f22f390 update: avpnv=4003e46054003e00, hash=000000000722f390, f=80000006, psize: 2 ... BenH: The over-masking has been there for ever but only hurts with the new 64T support introduced in 3.7 Reported-by: Mike Qiu Signed-off-by: Aneesh Kumar K.V Tested-by: Mike Qiu Signed-off-by: Benjamin Herrenschmidt CC: [v3.7]

POWERPC: drivers: remove __dev* attributes.

2013-01-03T23:57:04Z

CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Greg Kroah-Hartman

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

2012-12-18T17:58:09Z

Pull powerpc update from Benjamin Herrenschmidt: "The main highlight is probably some base POWER8 support. There's more to come such as transactional memory support but that will wait for the next one. Overall it's pretty quiet, or rather I've been pretty poor at picking things up from patchwork and reviewing them this time around and Kumar no better on the FSL side it seems..." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (73 commits) powerpc+of: Rename and fix OF reconfig notifier error inject module powerpc: mpc5200: Add a3m071 board support powerpc/512x: don't compile any platform DIU code if the DIU is not enabled powerpc/mpc52xx: use module_platform_driver macro powerpc+of: Export of_reconfig_notifier_[register,unregister] powerpc/dma/raidengine: add raidengine device powerpc/iommu/fsl: Add PAMU bypass enable register to ccsr_guts struct powerpc/mpc85xx: Change spin table to cached memory powerpc/fsl-pci: Add PCI controller ATMU PM support powerpc/86xx: fsl_pcibios_fixup_bus requires CONFIG_PCI drivers/virt: the Freescale hypervisor driver doesn't need to check MSR[GS] powerpc/85xx: p1022ds: Use NULL instead of 0 for pointers powerpc: Disable relocation on exceptions when kexecing powerpc: Enable relocation on during exceptions at boot powerpc: Move get_longbusy_msecs into hvcall.h and remove duplicate function powerpc: Add wrappers to enable/disable relocation on exceptions powerpc: Add set_mode hcall powerpc: Setup relocation on exceptions for bare metal systems powerpc: Move initial mfspr LPCR out of __init_LPCR powerpc: Add relocation on exception vector handlers ...

Merge branch 'akpm' (Andrew's patch-bomb)

2012-12-13T21:11:15Z

Merge misc VM changes from Andrew Morton: "The rest of most-of-MM. The other MM bits await a slab merge. This patch includes the addition of a huge zero_page. Not a performance boost but it an save large amounts of physical memory in some situations. Also a bunch of Fujitsu engineers are working on memory hotplug. Which, as it turns out, was badly broken. About half of their patches are included here; the remainder are 3.8 material." However, this merge disables CONFIG_MOVABLE_NODE, which was totally broken. We don't add new features with "default y", nor do we add Kconfig questions that are incomprehensible to most people without any help text. Does the feature even make sense without compaction or memory hotplug? * akpm: (54 commits) mm/bootmem.c: remove unused wrapper function reserve_bootmem_generic() mm/memory.c: remove unused code from do_wp_page() asm-generic, mm: pgtable: consolidate zero page helpers mm/hugetlb.c: fix warning on freeing hwpoisoned hugepage hwpoison, hugetlbfs: fix RSS-counter warning hwpoison, hugetlbfs: fix "bad pmd" warning in unmapping hwpoisoned hugepage mm: protect against concurrent vma expansion memcg: do not check for mm in __mem_cgroup_count_vm_event tmpfs: support SEEK_DATA and SEEK_HOLE (reprise) mm: provide more accurate estimation of pages occupied by memmap fs/buffer.c: remove redundant initialization in alloc_page_buffers() fs/buffer.c: do not inline exported function writeback: fix a typo in comment mm: introduce new field "managed_pages" to struct zone mm, oom: remove statically defined arch functions of same name mm, oom: remove redundant sleep in pagefault oom handler mm, oom: cleanup pagefault oom handler memory_hotplug: allow online/offline memory to result movable node numa: add CONFIG_MOVABLE_NODE for movable-dedicated node mm, memcg: avoid unnecessary function call when memcg is disabled ...

mm, oom: remove statically defined arch functions of same name

2012-12-13T01:38:34Z

out_of_memory() is a globally defined function to call the oom killer. x86, sh, and powerpc all use a function of the same name within file scope in their respective fault.c unnecessarily. Inline the functions into the pagefault handlers to clean the code up. Signed-off-by: David Rientjes Cc: Ingo Molnar Cc: "H. Peter Anvin" Cc: Thomas Gleixner Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Paul Mundt Reviewed-by: Michal Hocko Reviewed-by: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Fix misspellings of "whether" in comments.

2012-11-19T13:31:35Z

"Whether" is misspelled in various comments across the tree; this fixes them. No code changes. Signed-off-by: Adam Buchbinder Signed-off-by: Jiri Kosina