kernel.git/arch/powerpc/kvm, branch linux-3.17.y

powerpc/kvm/cma: Fix panic introduces by signed shift operation

2014-09-03T08:34:07Z

fc95ca7284bc54953165cba76c3228bd2cdb9591 introduces a memset in kvmppc_alloc_hpt since the general CMA doesn't clear the memory it allocates. However, the size argument passed to memset is computed from a signed value and its signed bit is extended by the cast the compiler is doing. This lead to extremely large size value when dealing with order value >= 31, and almost all the memory following the allocated space is cleaned. As a consequence, the system is panicing and may even fail spawning the kdump kernel. This fix makes use of an unsigned value for the memset's size argument to avoid sign extension. Among this fix, another shift operation which may lead to signed extended value too is also fixed. Cc: Alexey Kardashevskiy Cc: Paul Mackerras Cc: Alexander Graf Cc: Aneesh Kumar K.V Cc: Joonsoo Kim Cc: Benjamin Herrenschmidt Signed-off-by: Laurent Dufour Signed-off-by: Paolo Bonzini

PC, KVM, CMA: Fix regression caused by wrong get_order() use

2014-08-19T13:11:57Z

fc95ca7284bc54953165cba76c3228bd2cdb9591 claims that there is no functional change but this is not true as it calls get_order() (which takes bytes) where it should have called order_base_2() and the kernel stops on VM_BUG_ON(). This replaces get_order() with order_base_2() (round-up version of ilog2). Suggested-by: Paul Mackerras Cc: Alexander Graf Cc: Joonsoo Kim Cc: Benjamin Herrenschmidt Reviewed-by: Aneesh Kumar K.V Signed-off-by: Alexey Kardashevskiy Signed-off-by: Paolo Bonzini

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2014-08-07T18:35:30Z

Pull second round of KVM changes from Paolo Bonzini: "Here are the PPC and ARM changes for KVM, which I separated because they had small conflicts (respectively within KVM documentation, and with 3.16-rc changes). Since they were all within the subsystem, I took care of them. Stephen Rothwell reported some snags in PPC builds, but they are all fixed now; the latest linux-next report was clean. New features for ARM include: - KVM VGIC v2 emulation on GICv3 hardware - Big-Endian support for arm/arm64 (guest and host) - Debug Architecture support for arm64 (arm32 is on Christoffer's todo list) And for PPC: - Book3S: Good number of LE host fixes, enable HV on LE - Book3S HV: Add in-guest debug support This release drops support for KVM on the PPC440. As a result, the PPC merge removes more lines than it adds. :) I also included an x86 change, since Davidlohr tied it to an independent bug report and the reporter quickly provided a Tested-by; there was no reason to wait for -rc2" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (122 commits) KVM: Move more code under CONFIG_HAVE_KVM_IRQFD KVM: nVMX: fix "acknowledge interrupt on exit" when APICv is in use KVM: nVMX: Fix nested vmexit ack intr before load vmcs01 KVM: PPC: Enable IRQFD support for the XICS interrupt controller KVM: Give IRQFD its own separate enabling Kconfig option KVM: Move irq notifier implementation into eventfd.c KVM: Move all accesses to kvm::irq_routing into irqchip.c KVM: irqchip: Provide and use accessors for irq routing table KVM: Don't keep reference to irq routing table in irqfd struct KVM: PPC: drop duplicate tracepoint arm64: KVM: fix 64bit CP15 VM access for 32bit guests KVM: arm64: GICv3: mandate page-aligned GICV region arm64: KVM: GICv3: move system register access to msr_s/mrs_s KVM: PPC: PR: Handle FSCR feature deselects KVM: PPC: HV: Remove generic instruction emulation KVM: PPC: BOOKEHV: rename e500hv_spr to bookehv_spr KVM: PPC: Remove DCR handling KVM: PPC: Expose helper functions for data/inst faults KVM: PPC: Separate loadstore emulation from priv emulation KVM: PPC: Handle magic page in kvmppc_ld/st ...

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

2014-08-07T15:50:34Z

Pull powerpc updates from Ben Herrenschmidt: "This is the powerpc new goodies for 3.17. The short story: The biggest bit is Michael removing all of pre-POWER4 processor support from the 64-bit kernel. POWER3 and rs64. This gets rid of a ton of old cruft that has been bitrotting in a long while. It was broken for quite a few versions already and nobody noticed. Nobody uses those machines anymore. While at it, he cleaned up a bunch of old dusty cabinets, getting rid of a skeletton or two. Then, we have some base VFIO support for KVM, which allows assigning of PCI devices to KVM guests, support for large 64-bit BARs on "powernv" platforms, support for HMI (Hardware Management Interrupts) on those same platforms, some sparse-vmemmap improvements (for memory hotplug), There is the usual batch of Freescale embedded updates (summary in the merge commit) and fixes here or there, I think that's it for the highlights" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (102 commits) powerpc/eeh: Export eeh_iommu_group_to_pe() powerpc/eeh: Add missing #ifdef CONFIG_IOMMU_API powerpc: Reduce scariness of interrupt frames in stack traces powerpc: start loop at section start of start in vmemmap_populated() powerpc: implement vmemmap_free() powerpc: implement vmemmap_remove_mapping() for BOOK3S powerpc: implement vmemmap_list_free() powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE powerpc/book3s: Fix endianess issue for HMI handling on napping cpus. powerpc/book3s: handle HMIs for cpus in nap mode. powerpc/powernv: Invoke opal call to handle hmi. powerpc/book3s: Add basic infrastructure to handle HMI in Linux. powerpc/iommu: Fix comments with it_page_shift powerpc/powernv: Handle compound PE in config accessors powerpc/powernv: Handle compound PE for EEH powerpc/powernv: Handle compound PE powerpc/powernv: Split ioda_eeh_get_state() powerpc/powernv: Allow to freeze PE powerpc/powernv: Enable M64 aperatus for PHB3 powerpc/eeh: Aux PE data for error log ...

mm, CMA: change cma_declare_contiguous() to obey coding convention

2014-08-07T01:01:16Z

Conventionally, we put output param to the end of param list and put the 'base' ahead of 'size', but cma_declare_contiguous() doesn't look like that, so change it. Additionally, move down cma_areas reference code to the position where it is really needed. Signed-off-by: Joonsoo Kim Acked-by: Michal Nazarewicz Reviewed-by: Aneesh Kumar K.V Cc: Alexander Graf Cc: Aneesh Kumar K.V Cc: Gleb Natapov Acked-by: Marek Szyprowski Tested-by: Marek Szyprowski Cc: Minchan Kim Cc: Paolo Bonzini Cc: Zhang Yanfei Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

PPC, KVM, CMA: use general CMA reserved area management framework

2014-08-07T01:01:16Z

Now, we have general CMA reserved area management framework, so use it for future maintainabilty. There is no functional change. Signed-off-by: Joonsoo Kim Acked-by: Michal Nazarewicz Acked-by: Paolo Bonzini Tested-by: Aneesh Kumar K.V Cc: Alexander Graf Cc: Aneesh Kumar K.V Cc: Gleb Natapov Acked-by: Marek Szyprowski Tested-by: Marek Szyprowski Cc: Minchan Kim Cc: Zhang Yanfei Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

KVM: PPC: Enable IRQFD support for the XICS interrupt controller

2014-08-05T12:26:33Z

This makes it possible to use IRQFDs on platforms that use the XICS interrupt controller. To do this we implement kvm_irq_map_gsi() and kvm_irq_map_chip_pin() in book3s_xics.c, so as to provide a 1-1 mapping between global interrupt numbers and XICS interrupt source numbers. For now, all interrupts are mapped as "IRQCHIP" interrupts, and no MSI support is provided. This means that kvm_set_irq can now get called with level == 0 or 1 as well as the powerpc-specific values KVM_INTERRUPT_SET, KVM_INTERRUPT_UNSET and KVM_INTERRUPT_SET_LEVEL. We change ics_deliver_irq() to accept all those values, and remove its report_status argument, as it is always false, given that we don't support KVM_IRQ_LINE_STATUS. This also adds support for interrupt ack notifiers to the XICS code so that the IRQFD resampler functionality can be supported. Signed-off-by: Paul Mackerras Tested-by: Eric Auger Tested-by: Cornelia Huck Signed-off-by: Paolo Bonzini

KVM: Give IRQFD its own separate enabling Kconfig option

2014-08-05T12:26:28Z

Currently, the IRQFD code is conditional on CONFIG_HAVE_KVM_IRQ_ROUTING. So that we can have the IRQFD code compiled in without having the IRQ routing code, this creates a new CONFIG_HAVE_KVM_IRQFD, makes the IRQFD code conditional on it instead of CONFIG_HAVE_KVM_IRQ_ROUTING, and makes all the platforms that currently select HAVE_KVM_IRQ_ROUTING also select HAVE_KVM_IRQFD. Signed-off-by: Paul Mackerras Tested-by: Eric Auger Tested-by: Cornelia Huck Signed-off-by: Paolo Bonzini

KVM: irqchip: Provide and use accessors for irq routing table

2014-08-05T12:26:16Z

This provides accessor functions for the KVM interrupt mappings, in order to reduce the amount of code that accesses the fields of the kvm_irq_routing_table struct, and restrict that code to one file, virt/kvm/irqchip.c. The new functions are kvm_irq_map_gsi(), which maps from a global interrupt number to a set of IRQ routing entries, and kvm_irq_map_chip_pin, which maps from IRQ chip and pin numbers to a global interrupt number. This also moves the update of kvm_irq_routing_table::chip[][] into irqchip.c, out of the various kvm_set_routing_entry implementations. That means that none of the kvm_set_routing_entry implementations need the kvm_irq_routing_table argument anymore, so this removes it. This does not change any locking or data lifetime rules. Signed-off-by: Paul Mackerras Tested-by: Eric Auger Tested-by: Cornelia Huck Signed-off-by: Paolo Bonzini

KVM: PPC: drop duplicate tracepoint

2014-08-05T12:23:41Z

Commit 29577fc00ba4 ("KVM: PPC: HV: Remove generic instruction emulation") caused a build failure with allyesconfig: arch/powerpc/kvm/kvm-pr.o:(__tracepoints+0xa8): multiple definition of `__tracepoint_kvm_ppc_instr' arch/powerpc/kvm/kvm.o:(__tracepoints+0x1c0): first defined here due to a duplicate definition of the tracepoint in trace.h and trace_pr.h. Because the tracepoint is still used by Book3S HV code, and because the PR code does include trace.h, just remove the duplicate definition from trace_pr.h, and export it from kvm.o. Reported-by: Stephen Rothwell Signed-off-by: Paolo Bonzini