kernel.git/arch/powerpc/kvm/Makefile, branch linux-4.10.y

Merge branch 'kvm-ppc-infrastructure' into kvm-ppc-next

2016-09-09T06:24:23Z

This merges the topic branch 'kvm-ppc-infrastructure' into kvm-ppc-next so that I can then apply further patches that need the changes in the kvm-ppc-infrastructure branch. Signed-off-by: Paul Mackerras

powerpc: move hmi.c to arch/powerpc/kvm/

2016-09-09T06:18:07Z

hmi.c functions are unused unless sibling_subcore_state is nonzero, and that in turn happens only if KVM is in use. So move the code to arch/powerpc/kvm/, putting it under CONFIG_KVM_BOOK3S_HV_POSSIBLE rather than CONFIG_PPC_BOOK3S_64. The sibling_subcore_state is also included in struct paca_struct only if KVM is supported by the kernel. Cc: Daniel Axtens Cc: Michael Ellerman Cc: Mahesh Salgaonkar Cc: Paul Mackerras Cc: linuxppc-dev@lists.ozlabs.org Cc: kvm-ppc@vger.kernel.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini Signed-off-by: Paul Mackerras

KVM: PPC: Always select KVM_VFIO, plus Makefile cleanup

2016-08-25T12:25:49Z

As discussed recently on the kvm mailing list, David Gibson's intention in commit 178a78750212 ("vfio: Enable VFIO device for powerpc", 2016-02-01) was to have the KVM VFIO device built in on all powerpc platforms. This patch adds the "select KVM_VFIO" statement that makes this happen. Currently, arch/powerpc/kvm/Makefile doesn't include vfio.o for the 64-bit kvm module, because the list of objects doesn't use the $(common-objs-y) list. The reason it doesn't is because we don't necessarily want coalesced_mmio.o or emulate.o (for example if HV KVM is the only target), and common-objs-y includes both. Since this is confusing, this patch adjusts the definitions so that we now use $(common-objs-y) in the list for the 64-bit kvm.ko module, emulate.o is removed from common-objs-y and added in the places that need it, and the inclusion of coalesced_mmio.o now depends on CONFIG_KVM_MMIO. Reviewed-by: Paolo Bonzini Reviewed-by: David Gibson Signed-off-by: Paul Mackerras

Kbuild: arch: look for generated headers in obtree

2016-07-18T19:31:35Z

There are very few files that need add an -I$(obj) gcc for the preprocessor or the assembler. For C files, we add always these for both the objtree and srctree, but for the other ones we require the Makefile to add them, and Kbuild then adds it for both trees. As a preparation for changing the meaning of the -I$(obj) directive to only refer to the srctree, this changes the two instances in arch/x86 to use an explictit $(objtree) prefix where needed, otherwise we won't find the headers any more, as reported by the kbuild 0day builder. arch/x86/realmode/rm/realmode.lds.S:75:20: fatal error: pasyms.h: No such file or directory Signed-off-by: Arnd Bergmann Signed-off-by: Michal Marek

KVM: PPC: do not compile in vfio.o unconditionally

2016-03-22T15:38:38Z

Build on 32-bit PPC fails with the following error: int kvm_vfio_ops_init(void) ^ In file included from arch/powerpc/kvm/../../../virt/kvm/vfio.c:21:0: arch/powerpc/kvm/../../../virt/kvm/vfio.h:8:90: note: previous definition of ‘kvm_vfio_ops_init’ was here arch/powerpc/kvm/../../../virt/kvm/vfio.c:292:6: error: redefinition of ‘kvm_vfio_ops_exit’ void kvm_vfio_ops_exit(void) ^ In file included from arch/powerpc/kvm/../../../virt/kvm/vfio.c:21:0: arch/powerpc/kvm/../../../virt/kvm/vfio.h:12:91: note: previous definition of ‘kvm_vfio_ops_exit’ was here scripts/Makefile.build:258: recipe for target arch/powerpc/kvm/../../../virt/kvm/vfio.o failed make[3]: *** [arch/powerpc/kvm/../../../virt/kvm/vfio.o] Error 1 Check whether CONFIG_KVM_VFIO is set before including vfio.o in the build. Reported-by: Pranith Kumar Tested-by: Pranith Kumar Signed-off-by: Paolo Bonzini

vfio: Enable VFIO device for powerpc

2016-02-15T02:42:25Z

ec53500f "kvm: Add VFIO device" added a special KVM pseudo-device which is used to handle any necessary interactions between KVM and VFIO. Currently that device is built on x86 and ARM, but not powerpc, although powerpc does support both KVM and VFIO. This makes things awkward in userspace Currently qemu prints an alarming error message if you attempt to use VFIO and it can't initialize the KVM VFIO device. We don't want to remove the warning, because lack of the KVM VFIO device could mean coherency problems on x86. On powerpc, however, the error is harmless but looks disturbing, and a test based on host architecture in qemu would be ugly, and break if we do need the KVM VFIO device for something important in future. There's nothing preventing the KVM VFIO device from being built for powerpc, so this patch turns it on. It won't actually do anything, since we don't define any of the arch_*() hooks, but it will make qemu happy and we can extend it in future if we need to. Signed-off-by: David Gibson Reviewed-by: Eric Auger Signed-off-by: Paul Mackerras

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2014-08-07T18:35:30Z

Pull second round of KVM changes from Paolo Bonzini: "Here are the PPC and ARM changes for KVM, which I separated because they had small conflicts (respectively within KVM documentation, and with 3.16-rc changes). Since they were all within the subsystem, I took care of them. Stephen Rothwell reported some snags in PPC builds, but they are all fixed now; the latest linux-next report was clean. New features for ARM include: - KVM VGIC v2 emulation on GICv3 hardware - Big-Endian support for arm/arm64 (guest and host) - Debug Architecture support for arm64 (arm32 is on Christoffer's todo list) And for PPC: - Book3S: Good number of LE host fixes, enable HV on LE - Book3S HV: Add in-guest debug support This release drops support for KVM on the PPC440. As a result, the PPC merge removes more lines than it adds. :) I also included an x86 change, since Davidlohr tied it to an independent bug report and the reporter quickly provided a Tested-by; there was no reason to wait for -rc2" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (122 commits) KVM: Move more code under CONFIG_HAVE_KVM_IRQFD KVM: nVMX: fix "acknowledge interrupt on exit" when APICv is in use KVM: nVMX: Fix nested vmexit ack intr before load vmcs01 KVM: PPC: Enable IRQFD support for the XICS interrupt controller KVM: Give IRQFD its own separate enabling Kconfig option KVM: Move irq notifier implementation into eventfd.c KVM: Move all accesses to kvm::irq_routing into irqchip.c KVM: irqchip: Provide and use accessors for irq routing table KVM: Don't keep reference to irq routing table in irqfd struct KVM: PPC: drop duplicate tracepoint arm64: KVM: fix 64bit CP15 VM access for 32bit guests KVM: arm64: GICv3: mandate page-aligned GICV region arm64: KVM: GICv3: move system register access to msr_s/mrs_s KVM: PPC: PR: Handle FSCR feature deselects KVM: PPC: HV: Remove generic instruction emulation KVM: PPC: BOOKEHV: rename e500hv_spr to bookehv_spr KVM: PPC: Remove DCR handling KVM: PPC: Expose helper functions for data/inst faults KVM: PPC: Separate loadstore emulation from priv emulation KVM: PPC: Handle magic page in kvmppc_ld/st ...

PPC, KVM, CMA: use general CMA reserved area management framework

2014-08-07T01:01:16Z

Now, we have general CMA reserved area management framework, so use it for future maintainabilty. There is no functional change. Signed-off-by: Joonsoo Kim Acked-by: Michal Nazarewicz Acked-by: Paolo Bonzini Tested-by: Aneesh Kumar K.V Cc: Alexander Graf Cc: Aneesh Kumar K.V Cc: Gleb Natapov Acked-by: Marek Szyprowski Tested-by: Marek Szyprowski Cc: Minchan Kim Cc: Zhang Yanfei Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

KVM: PPC: HV: Remove generic instruction emulation

2014-07-30T13:25:49Z

Now that we have properly split load/store instruction emulation and generic instruction emulation, we can move the generic one from kvm.ko to kvm-pr.ko on book3s_64. This reduces the attack surface and amount of code loaded on HV KVM kernels. Signed-off-by: Alexander Graf

KVM: PPC: Separate loadstore emulation from priv emulation

2014-07-28T16:30:10Z

Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf