kernel.git/arch/powerpc/kernel, branch linux-4.16.y

powerpc/64s: Default l1d_size to 64K in RFI fallback flush

2018-06-20T19:01:17Z

[ Upstream commit 9dfbf78e4114fcaf4ef61c49885c3ab5bad40d0b ] If there is no d-cache-size property in the device tree, l1d_size could be zero. We don't actually expect that to happen, it's only been seen on mambo (simulator) in some configurations. A zero-size l1d_size leads to the loop in the asm wrapping around to 2^64-1, and then walking off the end of the fallback area and eventually causing a page fault which is fatal. Just default to 64K which is correct on some CPUs, and sane enough to not cause a crash on others. Fixes: aa8a5e0062ac9 ('powerpc/64s: Add support for RFI flush of L1-D cache') Signed-off-by: Madhavan Srinivasan [mpe: Rewrite comment and change log] Signed-off-by: Michael Ellerman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

powerpc/mm/slice: Fix hugepage allocation at hint address on 8xx

2018-05-30T06:17:39Z

[ Upstream commit aa0ab02ba992eb956934b21373e0138211486ddd ] On the 8xx, the page size is set in the PMD entry and applies to all pages of the page table pointed by the said PMD entry. When an app has some regular pages allocated (e.g. see below) and tries to mmap() a huge page at a hint address covered by the same PMD entry, the kernel accepts the hint allthough the 8xx cannot handle different page sizes in the same PMD entry. 10000000-10001000 r-xp 00000000 00:0f 2597 /root/malloc 10010000-10011000 rwxp 00000000 00:0f 2597 /root/malloc mmap(0x10080000, 524288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS|0x40000, -1, 0) = 0x10080000 This results the app remaining forever in do_page_fault()/hugetlb_fault() and when interrupting that app, we get the following warning: [162980.035629] WARNING: CPU: 0 PID: 2777 at arch/powerpc/mm/hugetlbpage.c:354 hugetlb_free_pgd_range+0xc8/0x1e4 [162980.035699] CPU: 0 PID: 2777 Comm: malloc Tainted: G W 4.14.6 #85 [162980.035744] task: c67e2c00 task.stack: c668e000 [162980.035783] NIP: c000fe18 LR: c00e1eec CTR: c00f90c0 [162980.035830] REGS: c668fc20 TRAP: 0700 Tainted: G W (4.14.6) [162980.035854] MSR: 00029032 CR: 24044224 XER: 20000000 [162980.036003] [162980.036003] GPR00: c00e1eec c668fcd0 c67e2c00 00000010 c6869410 10080000 00000000 77fb4000 [162980.036003] GPR08: ffff0001 0683c001 00000000 ffffff80 44028228 10018a34 00004008 418004fc [162980.036003] GPR16: c668e000 00040100 c668e000 c06c0000 c668fe78 c668e000 c6835ba0 c668fd48 [162980.036003] GPR24: 00000000 73ffffff 74000000 00000001 77fb4000 100fffff 10100000 10100000 [162980.036743] NIP [c000fe18] hugetlb_free_pgd_range+0xc8/0x1e4 [162980.036839] LR [c00e1eec] free_pgtables+0x12c/0x150 [162980.036861] Call Trace: [162980.036939] [c668fcd0] [c00f0774] unlink_anon_vmas+0x1c4/0x214 (unreliable) [162980.037040] [c668fd10] [c00e1eec] free_pgtables+0x12c/0x150 [162980.037118] [c668fd40] [c00eabac] exit_mmap+0xe8/0x1b4 [162980.037210] [c668fda0] [c0019710] mmput.part.9+0x20/0xd8 [162980.037301] [c668fdb0] [c001ecb0] do_exit+0x1f0/0x93c [162980.037386] [c668fe00] [c001f478] do_group_exit+0x40/0xcc [162980.037479] [c668fe10] [c002a76c] get_signal+0x47c/0x614 [162980.037570] [c668fe70] [c0007840] do_signal+0x54/0x244 [162980.037654] [c668ff30] [c0007ae8] do_notify_resume+0x34/0x88 [162980.037744] [c668ff40] [c000dae8] do_user_signal+0x74/0xc4 [162980.037781] Instruction dump: [162980.037821] 7fdff378 81370000 54a3463a 80890020 7d24182e 7c841a14 712a0004 4082ff94 [162980.038014] 2f890000 419e0010 712a0ff0 408200e0 <0fe00000> 54a9000a 7f984840 419d0094 [162980.038216] ---[ end trace c0ceeca8e7a5800a ]--- [162980.038754] BUG: non-zero nr_ptes on freeing mm: 1 [162985.363322] BUG: non-zero nr_ptes on freeing mm: -1 In order to fix this, this patch uses the address space "slices" implemented for BOOK3S/64 and enhanced to support PPC32 by the preceding patch. This patch modifies the context.id on the 8xx to be in the range [1:16] instead of [0:15] in order to identify context.id == 0 as not initialised contexts as done on BOOK3S This patch activates CONFIG_PPC_MM_SLICES when CONFIG_HUGETLB_PAGE is selected for the 8xx Alltough we could in theory have as many slices as PMD entries, the current slices implementation limits the number of low slices to 16. This limitation is not preventing us to fix the initial issue allthough it is suboptimal. It will be cured in a subsequent patch. Fixes: 4b91428699477 ("powerpc/8xx: Implement support of hugepages") Signed-off-by: Christophe Leroy Reviewed-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

powerpc/64s: sreset panic if there is no debugger or crash dump handlers

2018-05-30T06:17:24Z

[ Upstream commit d40b6768e45bd9213139b2d91d30c7692b6007b1 ] system_reset_exception does most of its own crash handling now, invoking the debugger or crash dumps if they are registered. If not, then it goes through to die() to print stack traces, and then is supposed to panic (according to comments). However after die() prints oopses, it does its own handling which doesn't allow system_reset_exception to panic (e.g., it may just kill the current process). This patch causes sreset exceptions to return from die after it prints messages but before acting. This also stops die from invoking the debugger on 0x100 crashes. system_reset_exception similarly calls the debugger. It had been thought this was harmless (because if the debugger was disabled, neither call would fire, and if it was enabled the first call would return). However in some cases like xmon 'X' command, the debugger returns 0, which currently causes it to be entered again (first in system_reset_exception, then in die), which is confusing. Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

powerpc/64s/idle: Fix restore of AMOR on POWER9 after deep sleep

2018-05-30T06:17:23Z

[ Upstream commit c1b25a17d24925b0961c319cfc3fd7e1dc778914 ] POWER8 restores AMOR when waking from deep sleep, but POWER9 does not, because it does not go through the subcore restore. Have POWER9 restore it in core restore. Fixes: ee97b6b99f42 ("powerpc/mm/radix: Setup AMOR in HV mode to allow key 0") Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

powerpc/fscr: Enable interrupts earlier before calling get_user()

2018-05-30T06:17:21Z

[ Upstream commit 709b973c844c0b4d115ac3a227a2e5a68722c912 ] The function get_user() can sleep while trying to fetch instruction from user address space and causes the following warning from the scheduler. BUG: sleeping function called from invalid context Though interrupts get enabled back but it happens bit later after get_user() is called. This change moves enabling these interrupts earlier covering the function get_user(). While at this, lets check for kernel mode and crash as this interrupt should not have been triggered from the kernel context. Signed-off-by: Anshuman Khandual Signed-off-by: Michael Ellerman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

powerpc/64s: Clear PCR on boot

2018-05-30T06:17:17Z

commit faf37c44a105f3608115785f17cbbf3500f8bc71 upstream. Clear the PCR (Processor Compatibility Register) on boot to ensure we are not running in a compatibility mode. We've seen this cause problems when a crash (and kdump) occurs while running compat mode guests. The kdump kernel then runs with the PCR set and causes problems. The symptom in the kdump kernel (also seen in petitboot after fast-reboot) is early userspace programs taking sigills on newer instructions (seen in libc). Signed-off-by: Michael Neuling Cc: stable@vger.kernel.org Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman

powerpc/64s: Add support for a store forwarding barrier at kernel entry/exit

2018-05-25T14:46:06Z

commit a048a07d7f4535baa4cbad6bc024f175317ab938 upstream. On some CPUs we can prevent a vulnerability related to store-to-load forwarding by preventing store forwarding between privilege domains, by inserting a barrier in kernel entry and exit paths. This is known to be the case on at least Power7, Power8 and Power9 powerpc CPUs. Barriers must be inserted generally before the first load after moving to a higher privilege, and after the last store before moving to a lower privilege, HV and PR privilege transitions must be protected. Barriers are added as patch sections, with all kernel/hypervisor entry points patched, and the exit points to lower privilge levels patched similarly to the RFI flush patching. Firmware advertisement is not implemented yet, so CPU flush types are hard coded. Thanks to Michal Suchánek for bug fixes and review. Signed-off-by: Nicholas Piggin Signed-off-by: Mauricio Faria de Oliveira Signed-off-by: Michael Neuling Signed-off-by: Michal Suchánek Signed-off-by: Michael Ellerman Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

powerpc: Move default security feature flags

2018-05-25T14:46:06Z

commit e7347a86830f38dc3e40c8f7e28c04412b12a2e7 upstream. This moves the definition of the default security feature flags (i.e., enabled by default) closer to the security feature flags. This can be used to restore current flags to the default flags. Signed-off-by: Mauricio Faria de Oliveira Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman

powerpc/64s: Wire up cpu_show_spectre_v2()

2018-05-25T14:46:05Z

commit d6fbe1c55c55c6937cbea3531af7da84ab7473c3 upstream. Add a definition for cpu_show_spectre_v2() to override the generic version. This has several permuations, though in practice some may not occur we cater for any combination. The most verbose is: Mitigation: Indirect branch serialisation (kernel only), Indirect branch cache disabled, ori31 speculation barrier enabled We don't treat the ori31 speculation barrier as a mitigation on its own, because it has to be *used* by code in order to be a mitigation and we don't know if userspace is doing that. So if that's all we see we say: Vulnerable, ori31 speculation barrier enabled Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman

powerpc/64s: Wire up cpu_show_spectre_v1()

2018-05-25T14:46:05Z

commit 56986016cb8cd9050e601831fe89f332b4e3c46e upstream. Add a definition for cpu_show_spectre_v1() to override the generic version. Currently this just prints "Not affected" or "Vulnerable" based on the firmware flag. Although the kernel does have array_index_nospec() in a few places, we haven't yet audited all the powerpc code to see where it's necessary, so for now we don't list that as a mitigation. Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman