kernel.git/arch/powerpc/kernel, branch linux-4.12.y

powerpc: Fix VSX enabling/flushing to also test MSR_FP and MSR_VEC

2017-08-25T00:15:03Z

commit 5a69aec945d27e78abac9fd032533d3aaebf7c1e upstream. VSX uses a combination of the old vector registers, the old FP registers and new "second halves" of the FP registers. Thus when we need to see the VSX state in the thread struct (flush_vsx_to_thread()) or when we'll use the VSX in the kernel (enable_kernel_vsx()) we need to ensure they are all flushed into the thread struct if either of them is individually enabled. Unfortunately we only tested if the whole VSX was enabled, not if they were individually enabled. Fixes: 72cd7b44bc99 ("powerpc: Uncomment and make enable_kernel_vsx() routine available") Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman

powerpc: Fix /proc/cpuinfo revision for POWER9 DD2

2017-08-16T20:47:03Z

commit 64ebb9a208c6e66316329a6d9101815d1ee06fa9 upstream. The P9 PVR bits 12-15 don't indicate a revision but instead different chip configurations. From BookIV we have: Bits Configuration 0 : Scale out 12 cores 1 : Scale out 24 cores 2 : Scale up 12 cores 3 : Scale up 24 cores DD1 doesn't use this but DD2 does. Linux will mostly use the "Scale out 24 core" configuration (ie. SMT4 not SMT8) which results in a PVR of 0x004e1200. The reported revision in /proc/cpuinfo is hence reported incorrectly as "18.0". This patch fixes this to mask off only the relevant bits for the major revision (ie. bits 8-11) for POWER9. Signed-off-by: Michael Neuling Signed-off-by: Michael Ellerman Signed-off-by: Stewart Smith Signed-off-by: Greg Kroah-Hartman

powerpc/64: Fix __check_irq_replay missing decrementer interrupt

2017-08-11T15:33:52Z

commit 3db40c312c2c1eb2187c5731102fa8ff380e6e40 upstream. If the decrementer wraps again and de-asserts the decrementer exception while hard-disabled, __check_irq_replay() has a test to notice the wrap when interrupts are re-enabled. The decrementer check must be done when clearing the PACA_IRQ_HARD_DIS flag, not when the PACA_IRQ_DEC flag is tested. Previously this worked because the decrementer interrupt was always the first one checked after clearing the hard disable flag, but HMI check was moved ahead of that, which introduced this bug. This can cause a missed decrementer interrupt if we soft-disable interrupts then take an HMI which is recorded in irq_happened, then hard-disable interrupts for > 4s to wrap the decrementer. Fixes: e0e0d6b7390b ("powerpc/64: Replay hypervisor maintenance interrupt first") Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman

powerpc/tm: Fix saving of TM SPRs in core dump

2017-08-11T15:33:52Z

commit cd63f3cf1d59b7ad8419eba1cac8f9126e79cc43 upstream. Currently flush_tmregs_to_thread() does not save the TM SPRs (TFHAR, TFIAR, TEXASR) to the thread struct, unless the process is currently inside a suspended transaction. If the process is core dumping, and the TM SPRs have changed since the last time the process was context switched, then we will save stale values of the TM SPRs to the core dump. Fix it by saving the live register state to the thread struct in that case. Fixes: 08e1c01d6aed ("powerpc/ptrace: Enable support for TM SPR state") Signed-off-by: Gustavo Romero Reviewed-by: Cyril Bur Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman

powerpc/kexec: Fix radix to hash kexec due to IAMR/AMOR

2017-07-21T04:59:10Z

commit 1e2a516e89fc412a754327522ab271b42f99c6b4 upstream. This patch fixes a crash seen while doing a kexec from radix mode to hash mode. Key 0 is special in hash and used in the RPN by default, we set the key values to 0 today. In radix mode key 0 is used to control supervisor<->user access. In hash key 0 is used by default, so the first instruction after the switch causes a crash on kexec. Commit 3b10d0095a1e ("powerpc/mm/radix: Prevent kernel execution of user space") introduced the setting of IAMR and AMOR values to prevent execution of user mode instructions from supervisor mode. We need to clean up these SPR's on kexec. Fixes: 3b10d0095a1e ("powerpc/mm/radix: Prevent kernel execution of user space") Reported-by: Benjamin Herrenschmidt Signed-off-by: Balbir Singh Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman

powerpc/64: Initialise thread_info for emergency stacks

2017-06-23T03:25:38Z

Emergency stacks have their thread_info mostly uninitialised, which in particular means garbage preempt_count values. Emergency stack code runs with interrupts disabled entirely, and is used very rarely, so this has been unnoticed so far. It was found by a proposed new powerpc watchdog that takes a soft-NMI directly from the masked_interrupt handler and using the emergency stack. That crashed at BUG_ON(in_nmi()) in nmi_enter(). preempt_count()s were found to be garbage. To fix this, zero the entire THREAD_SIZE allocation, and initialize the thread_info. Cc: stable@vger.kernel.org Reported-by: Abdul Haleem Signed-off-by: Nicholas Piggin [mpe: Move it all into setup_64.c, use a function not a macro. Fix crashes on Cell by setting preempt_count to 0 not HARDIRQ_OFFSET] Signed-off-by: Michael Ellerman

powerpc/64s: Handle data breakpoints in Radix mode

2017-06-16T09:49:43Z

On Power9, trying to use data breakpoints throws the splat shown below. This is because the check for a data breakpoint in DSISR is in do_hash_page(), which is not called when in Radix mode. Unable to handle kernel paging request for data at address 0xc000000000e19218 Faulting instruction address: 0xc0000000001155e8 cpu 0x0: Vector: 300 (Data Access) at [c0000000ef1e7b20] pc: c0000000001155e8: find_pid_ns+0x48/0xe0 lr: c000000000116ac4: find_task_by_vpid+0x44/0x90 sp: c0000000ef1e7da0 msr: 9000000000009033 dar: c000000000e19218 dsisr: 400000 Move the check to handle_page_fault() so as to catch data breakpoints in both Hash and Radix MMU modes. We have to change the check in do_hash_page() against 0xa410 to use 0xa450, so as to include the value of (DSISR_DABRMATCH << 16). There are two sites that call handle_page_fault() when in Radix, both already pass DSISR in r4. Fixes: caca285e5ab4 ("powerpc/mm/radix: Use STD_MMU_64 to properly isolate hash related code") Cc: stable@vger.kernel.org # v4.7+ Reported-by: Shriya R. Kulkarni Signed-off-by: Naveen N. Rao [mpe: Fix the fall-through case on hash, we need to reload DSISR] Signed-off-by: Michael Ellerman

powerpc/kprobes: Skip livepatch_handler() for jprobes

2017-06-16T09:49:43Z

ftrace_caller() depends on a modified regs->nip to detect if a certain function has been livepatched. However, with KPROBES_ON_FTRACE, it is possible for regs->nip to have been modified by the kprobes pre_handler (jprobes, for instance). In this case, we do not want to invoke the livepatch_handler so as not to consume the livepatch stack. To distinguish between the two (kprobes and livepatch), we check if there is an active kprobe on the current function. If there is, then we know for sure that it must have modified the NIP as we don't support livepatching a kprobe'd function. In this case, we simply skip the livepatch_handler and branch to the new NIP. Otherwise, the livepatch_handler is invoked. Fixes: ead514d5fb30 ("powerpc/kprobes: Add support for KPROBES_ON_FTRACE") Signed-off-by: Naveen N. Rao Reviewed-by: Masami Hiramatsu Signed-off-by: Michael Ellerman

powerpc/ftrace: Pass the correct stack pointer for DYNAMIC_FTRACE_WITH_REGS

2017-06-16T09:49:43Z

For DYNAMIC_FTRACE_WITH_REGS, we should be passing-in the original set of registers in pt_regs, to capture the state _before_ ftrace_caller. However, we are instead passing the stack pointer *after* allocating a stack frame in ftrace_caller. Fix this by saving the proper value of r1 in pt_regs. Also, use SAVE_10GPRS() to simplify the code. Fixes: 153086644fd1 ("powerpc/ftrace: Add support for -mprofile-kernel ftrace ABI") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Naveen N. Rao Signed-off-by: Michael Ellerman

powerpc/kprobes: Pause function_graph tracing during jprobes handling

2017-06-16T09:49:43Z

This fixes a crash when function_graph and jprobes are used together. This is essentially commit 237d28db036e ("ftrace/jprobes/x86: Fix conflict between jprobes and function graph tracing"), but for powerpc. Jprobes breaks function_graph tracing since the jprobe hook needs to use jprobe_return(), which never returns back to the hook, but instead to the original jprobe'd function. The solution is to momentarily pause function_graph tracing before invoking the jprobe hook and re-enable it when returning back to the original jprobe'd function. Fixes: 6794c78243bf ("powerpc64: port of the function graph tracer") Cc: stable@vger.kernel.org # v2.6.30+ Signed-off-by: Naveen N. Rao Acked-by: Masami Hiramatsu Acked-by: Steven Rostedt (VMware) Signed-off-by: Michael Ellerman