kernel.git/arch/powerpc/kernel/smp.c, branch linux-5.9.y

powerpc/smp: Call rcu_cpu_starting() earlier

2020-11-22T09:15:33Z

commit 99f070b62322a4b8c1252952735806d09eb44b68 upstream. The call to rcu_cpu_starting() in start_secondary() is not early enough in the CPU-hotplug onlining process, which results in lockdep splats as follows (with CONFIG_PROVE_RCU_LIST=y): WARNING: suspicious RCU usage ----------------------------- kernel/locking/lockdep.c:3497 RCU-list traversed in non-reader section!! other info that might help us debug this: RCU used illegally from offline CPU! rcu_scheduler_active = 1, debug_locks = 1 no locks held by swapper/1/0. Call Trace: dump_stack+0xec/0x144 (unreliable) lockdep_rcu_suspicious+0x128/0x14c __lock_acquire+0x1060/0x1c60 lock_acquire+0x140/0x5f0 _raw_spin_lock_irqsave+0x64/0xb0 clockevents_register_device+0x74/0x270 register_decrementer_clockevent+0x94/0x110 start_secondary+0x134/0x800 start_secondary_prolog+0x10/0x14 This is avoided by adding a call to rcu_cpu_starting() near the beginning of the start_secondary() function. Note that the raw_smp_processor_id() is required in order to avoid calling into lockdep before RCU has declared the CPU to be watched for readers. It's safe to call rcu_cpu_starting() in the arch code as well as later in generic code, as explained by Paul: It uses a per-CPU variable so that RCU pays attention only to the first call to rcu_cpu_starting() if there is more than one of them. This is even intentional, due to there being a generic arch-independent call to rcu_cpu_starting() in notify_cpu_starting(). So multiple calls to rcu_cpu_starting() are fine by design. Fixes: 4d004099a668 ("lockdep: Fix lockdep recursion") Signed-off-by: Qian Cai Acked-by: Paul E. McKenney [mpe: Add Fixes tag, reword slightly & expand change log] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20201028182334.13466-1-cai@redhat.com Signed-off-by: Greg Kroah-Hartman

powerpc/book3s64/kuap: Move UAMOR setup to key init function

2020-07-20T12:57:59Z

UAMOR values are not application-specific. The kernel initializes its value based on different reserved keys. Remove the thread-specific UAMOR value and don't switch the UAMOR on context switch. Move UAMOR initialization to key initialization code and remove thread_struct.uamor because it is not used anymore. Before commit: 4a4a5e5d2aad ("powerpc/pkeys: key allocation/deallocation must not change pkey registers") we used to update uamor based on key allocation and free. Signed-off-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200709032946.881753-20-aneesh.kumar@linux.ibm.com

mm: reorder includes after introduction of linux/pgtable.h

2020-06-09T16:39:13Z

The replacement of with made the include of the latter in the middle of asm includes. Fix this up with the aid of the below script and manual adjustments here and there. import sys import re if len(sys.argv) is not 3: print "USAGE: %s

" % (sys.argv[0]) sys.exit(1) hdr_to_move="#include " % sys.argv[2] moved = False in_hdrs = False with open(sys.argv[1], "r") as f: lines = f.readlines() for _line in lines: line = _line.rstrip(' ') if line == hdr_to_move: continue if line.startswith("#include Signed-off-by: Andrew Morton Cc: Arnd Bergmann Cc: Borislav Petkov Cc: Brian Cain Cc: Catalin Marinas Cc: Chris Zankel Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Ungerer Cc: Guan Xuetao Cc: Guo Ren Cc: Heiko Carstens Cc: Helge Deller Cc: Ingo Molnar Cc: Ley Foon Tan Cc: Mark Salter Cc: Matthew Wilcox Cc: Matt Turner Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Simek Cc: Nick Hu Cc: Paul Walmsley Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Stafford Horne Cc: Thomas Bogendoerfer Cc: Thomas Gleixner Cc: Tony Luck Cc: Vincent Chen Cc: Vineet Gupta Cc: Will Deacon Cc: Yoshinori Sato Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org Signed-off-by: Linus Torvalds

mm: introduce include/linux/pgtable.h

2020-06-09T16:39:13Z

The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport Signed-off-by: Andrew Morton Cc: Arnd Bergmann Cc: Borislav Petkov Cc: Brian Cain Cc: Catalin Marinas Cc: Chris Zankel Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Ungerer Cc: Guan Xuetao Cc: Guo Ren Cc: Heiko Carstens Cc: Helge Deller Cc: Ingo Molnar Cc: Ley Foon Tan Cc: Mark Salter Cc: Matthew Wilcox Cc: Matt Turner Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Simek Cc: Nick Hu Cc: Paul Walmsley Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Stafford Horne Cc: Thomas Bogendoerfer Cc: Thomas Gleixner Cc: Tony Luck Cc: Vincent Chen Cc: Vineet Gupta Cc: Will Deacon Cc: Yoshinori Sato Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds

powerpc: Fix misleading small cores print

2020-06-02T10:59:06Z

Currently when we boot on a big core system, we get this print: [ 0.040500] Using small cores at SMT level This is misleading as we've actually detected big cores. This patch clears up the print to say we've detect big cores but are using small cores for scheduling. Signed-off-by: Michael Neuling Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200528230731.1235752-1-mikey@neuling.org

powerpc/smp: Use IS_ENABLED() to avoid #ifdef

2020-03-26T14:15:09Z

We can avoid the #ifdef by using IS_ENABLED() in the existing condition check. Signed-off-by: Michael Ellerman Reviewed-by: Srikar Dronamraju Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200313112020.28235-2-mpe@ellerman.id.au

powerpc/smp: Drop superfluous NULL check

2020-03-26T14:15:09Z

We don't need the NULL check of np, the result is the same because the OF helpers cope with NULL, of_node_to_nid(NULL) == NUMA_NO_NODE (-1). Signed-off-by: Michael Ellerman Reviewed-by: Srikar Dronamraju Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200313112020.28235-1-mpe@ellerman.id.au

powerpc/numa: Remove late request for home node associativity

2020-03-04T11:44:31Z

With commit ("powerpc/numa: Early request for home node associativity"), commit 2ea626306810 ("powerpc/topology: Get topology for shared processors at boot") which was requesting home node associativity becomes redundant. Hence remove the late request for home node associativity. Signed-off-by: Srikar Dronamraju Reported-by: Abdul Haleem Reviewed-by: Nathan Lynch Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200129135301.24739-6-srikar@linux.vnet.ibm.com

powerpc/smp: Use nid as fallback for package_id

2020-03-04T11:44:30Z

package_id is to match cores that are part of the same chip. On PowerNV machines, package_id defaults to chip_id. However ibm,chip_id property is not present in device-tree of PowerVM LPARs. Hence lscpu output shows one core per socket and multiple cores. To overcome this, use nid as the package_id on PowerVM LPARs. Before the patch: Architecture: ppc64le Byte Order: Little Endian CPU(s): 128 On-line CPU(s) list: 0-127 Thread(s) per core: 8 Core(s) per socket: 1 <---------------------- Socket(s): 16 <---------------------- NUMA node(s): 2 Model: 2.2 (pvr 004e 0202) Model name: POWER9 (architected), altivec supported Hypervisor vendor: pHyp Virtualization type: para L1d cache: 32K L1i cache: 32K L2 cache: 512K L3 cache: 10240K NUMA node0 CPU(s): 0-63 NUMA node1 CPU(s): 64-127 # # cat /sys/devices/system/cpu/cpu0/topology/physical_package_id -1 After the patch: Architecture: ppc64le Byte Order: Little Endian CPU(s): 128 On-line CPU(s) list: 0-127 Thread(s) per core: 8 <--------------------- Core(s) per socket: 8 <--------------------- Socket(s): 2 NUMA node(s): 2 Model: 2.2 (pvr 004e 0202) Model name: POWER9 (architected), altivec supported Hypervisor vendor: pHyp Virtualization type: para L1d cache: 32K L1i cache: 32K L2 cache: 512K L3 cache: 10240K NUMA node0 CPU(s): 0-63 NUMA node1 CPU(s): 64-127 # # cat /sys/devices/system/cpu/cpu0/topology/physical_package_id 0 Now lscpu output is more in line with the system configuration. Signed-off-by: Srikar Dronamraju [mpe: Use pkg_id instead of ppid, tweak change log and comment] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200129135121.24617-1-srikar@linux.vnet.ibm.com

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman