kernel.git/arch/powerpc/kernel/prom_init.c, branch linux-2.6.24.y

[POWERPC] efika: add phy-handle property for fec_mpc52xx

2008-01-10T15:12:59Z

The new network driver fec_mpc52xx will not work on efika because the firmware does not provide all required properties. http://www.powerdeveloper.org/asset/by-id/46 has a Forth script to create more properties. But only the phy stuff is required to get a working network. This should go into the kernel because its appearently impossible to boot the script via tftp and then load the real boot binary (yaboot or zimage). Signed-off-by: Olaf Hering Signed-off-by: Grant Likely Acked-by: Benjamin Herrenschmidt

[POWERPC] ] Fix memset size error

2007-11-08T03:15:33Z

The size passing to memset is wrong. Signed-off-by Li Zefan Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras

[POWERPC] prom_init whitespace cleanup, typo fix

2007-09-13T15:33:24Z

Whitespace cleanup: badly indented lines. Typo in comment. Signed-off-by: Linas Vepstas Signed-off-by: Paul Mackerras

[POWERPC] Advertise correct IDE mode on Pegasos2

2007-08-22T05:21:46Z

The built-in IDE controller is configured in legacy mode, but the PCI registers advertise native mode. Force the PCI class into legacy mode. This allows pata_via to access two drives. The Pegasos specific irq enforcement in the via82cxxx driver must stay because there is apparently no generic way to setup irq per channel. Tested on Pegasos2 with firmware version 20040810, and two IDE disks. Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras

[POWERPC] Donate idle CPU cycles on dedicated partitions

2007-06-14T12:29:58Z

A Power6 can give up CPU cycles on a dedicated CPU (as opposed to a shared CPU) to other shared processors if the administrator asks for it (via the HMC). This enables that to work properly on P6. This just involves setting a bit in the CAS structure as well as the VPA. To donate cycles, a CPU has to have all SMT threads idle and have the donate bit set in the VPA. Then call H_CEDE. The reason why shared processors just aren't used is because dedicated CPUs are guaranteed an actual processor, yet the system is still able to increase the capacity of the shared CPU pool. Also rename the VPA's cpuctls_task_attrs field to a more accurate name. Signed-off-by: Jake Moilanen Signed-off-by: Paul Mackerras

[POWERPC] Tell Phyp we support MSI

2007-05-08T03:40:31Z

Tell Phyp we support MSI via the client architecture support mechanism. Signed-off-by: Jake Moilanen Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras

[POWERPC] Add __init annotations to reserve_mem() and stabs_alloc()

2007-05-08T01:54:19Z

reserve_mem() and stabs_alloc() are both called only from other __init routines, so can be marked __init. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras

[POWERPC] Set efika's device_type to "soc"

2007-05-07T10:31:15Z

Device type should be "soc" (as in lite5200.dts), compatible is already set to "mpc5200". Signed-off-by: Domen Puncer Signed-off-by: Sylvain Munaut Signed-off-by: Paul Mackerras

[POWERPC] Add correct interrupt property for pegasos ide

2007-04-12T18:00:25Z

The firmware assigns irq 20/21 to the VIA IDE device on Pegasos. But the required interrupt is 14/15. Maybe someone confused decimal vs. hexadecimal values. Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras

[POWERPC] Add device tree fixups for the EFIKA

2007-02-13T04:35:53Z

We make the efika device tree compliant with the defined bindings (at least compliant enough). This is mostly done by mangling the device_type and compatible properties, but also adding some missing bits. Signed-off-by: Sylvain Munaut Acked-by: Grant Likely Signed-off-by: Paul Mackerras