kernel.git/arch/powerpc/kernel/prom.c, branch linux-5.8.y

mm: reorder includes after introduction of linux/pgtable.h

2020-06-09T16:39:13Z

The replacement of with made the include of the latter in the middle of asm includes. Fix this up with the aid of the below script and manual adjustments here and there. import sys import re if len(sys.argv) is not 3: print "USAGE: %s

" % (sys.argv[0]) sys.exit(1) hdr_to_move="#include " % sys.argv[2] moved = False in_hdrs = False with open(sys.argv[1], "r") as f: lines = f.readlines() for _line in lines: line = _line.rstrip(' ') if line == hdr_to_move: continue if line.startswith("#include Signed-off-by: Andrew Morton Cc: Arnd Bergmann Cc: Borislav Petkov Cc: Brian Cain Cc: Catalin Marinas Cc: Chris Zankel Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Ungerer Cc: Guan Xuetao Cc: Guo Ren Cc: Heiko Carstens Cc: Helge Deller Cc: Ingo Molnar Cc: Ley Foon Tan Cc: Mark Salter Cc: Matthew Wilcox Cc: Matt Turner Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Simek Cc: Nick Hu Cc: Paul Walmsley Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Stafford Horne Cc: Thomas Bogendoerfer Cc: Thomas Gleixner Cc: Tony Luck Cc: Vincent Chen Cc: Vineet Gupta Cc: Will Deacon Cc: Yoshinori Sato Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org Signed-off-by: Linus Torvalds

mm: introduce include/linux/pgtable.h

2020-06-09T16:39:13Z

The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport Signed-off-by: Andrew Morton Cc: Arnd Bergmann Cc: Borislav Petkov Cc: Brian Cain Cc: Catalin Marinas Cc: Chris Zankel Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Ungerer Cc: Guan Xuetao Cc: Guo Ren Cc: Heiko Carstens Cc: Helge Deller Cc: Ingo Molnar Cc: Ley Foon Tan Cc: Mark Salter Cc: Matthew Wilcox Cc: Matt Turner Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Simek Cc: Nick Hu Cc: Paul Walmsley Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Stafford Horne Cc: Thomas Bogendoerfer Cc: Thomas Gleixner Cc: Tony Luck Cc: Vincent Chen Cc: Vineet Gupta Cc: Will Deacon Cc: Yoshinori Sato Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds

powerpc/64s: Save FSCR to init_task.thread.fscr after feature init

2020-06-02T10:59:18Z

At boot the FSCR is initialised via one of two paths. On most systems it's set to a hard coded value in __init_FSCR(). On newer skiboot systems we use the device tree CPU features binding, where firmware can tell Linux what bits to set in FSCR (and HFSCR). In both cases the value that's configured at boot is not propagated into the init_task.thread.fscr value prior to the initial fork of init (pid 1), which means the value is not used by any processes other than swapper (the idle task). For the __init_FSCR() case this is OK, because the value in init_task.thread.fscr is initialised to something sensible. However it does mean that the value set in __init_FSCR() is not used other than for swapper, which is odd and confusing. The bigger problem is for the device tree CPU features case it prevents firmware from setting (or clearing) FSCR bits for use by user space. This means all existing kernels can not have features enabled/disabled by firmware if those features require setting/clearing FSCR bits. We can handle both cases by saving the FSCR value into init_task.thread.fscr after we have initialised it at boot. This fixes the bug for device tree CPU features, and will allow us to simplify the initialisation for the __init_FSCR() case in a future patch. Fixes: 5a61ef74f269 ("powerpc/64s: Support new device tree binding for discovering CPU features") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200527145843.2761782-3-mpe@ellerman.id.au

powerpc/kernel: Enables memory hot-remove after reboot on pseries guests

2020-06-02T10:59:07Z

While providing guests, it's desirable to resize it's memory on demand. By now, it's possible to do so by creating a guest with a small base memory, hot-plugging all the rest, and using 'movable_node' kernel command-line parameter, which puts all hot-plugged memory in ZONE_MOVABLE, allowing it to be removed whenever needed. But there is an issue regarding guest reboot: If memory is hot-plugged, and then the guest is rebooted, all hot-plugged memory goes to ZONE_NORMAL, which offers no guaranteed hot-removal. It usually prevents this memory to be hot-removed from the guest. It's possible to use device-tree information to fix that behavior, as it stores flags for LMB ranges on ibm,dynamic-memory-vN. It involves marking each memblock with the correct flags as hotpluggable memory, which mm/memblock.c puts in ZONE_MOVABLE during boot if 'movable_node' is passed. For carrying such information, the new flag DRCONF_MEM_HOTREMOVABLE was proposed and accepted into Power Architecture documentation. This flag should be: - true (b=1) if the hypervisor may want to hot-remove it later, and - false (b=0) if it does not care. During boot, guest kernel reads the device-tree, early_init_drmem_lmb() is called for every added LMBs. Here, checking for this new flag and marking memblocks as hotplugable memory is enough to get the desirable behavior. This should cause no change if 'movable_node' parameter is not passed in kernel command-line. Signed-off-by: Leonardo Bras Reviewed-by: Bharata B Rao Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200402195156.626430-1-leonardo@linux.ibm.com

powerpc: Replace _ALIGN_UP() by ALIGN()

2020-05-11T13:15:15Z

_ALIGN_UP() is specific to powerpc ALIGN() is generic and does the same Replace _ALIGN_UP() by ALIGN() Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Reviewed-by: Joel Stanley Link: https://lore.kernel.org/r/8a6d7e45f7904c73a0af539642d3962e2a3c7268.1587407777.git.christophe.leroy@c-s.fr

powerpc: Replace _ALIGN_DOWN() by ALIGN_DOWN()

2020-05-11T13:15:15Z

_ALIGN_DOWN() is specific to powerpc ALIGN_DOWN() is generic and does the same Replace _ALIGN_DOWN() by ALIGN_DOWN() Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Reviewed-by: Joel Stanley Link: https://lore.kernel.org/r/3911a86d6b5bfa7ad88cd7c82416fbe6bb47e793.1587407777.git.christophe.leroy@c-s.fr

powerpc/fadump: add support to preserve crash data on FADUMP disabled kernel

2019-09-13T14:04:45Z

Add a new kernel config option, CONFIG_PRESERVE_FA_DUMP that ensures that crash data, from previously crash'ed kernel, is preserved. This helps in cases where FADump is not enabled but the subsequent memory preserving kernel boot is likely to process this crash data. One typical usecase for this config option is petitboot kernel. As OPAL allows registering address with it in the first kernel and retrieving it after MPIPL, use it to store the top of boot memory. A kernel that intends to preserve crash data retrieves it and avoids using memory beyond this address. Move arch_reserved_kernel_pages() function as it is needed for both FA_DUMP and PRESERVE_FA_DUMP configurations. Signed-off-by: Hari Bathini Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/156821375751.5656.11459483669542541602.stgit@hbathini.in.ibm.com

powerpc/powernv: Introduce FW_FEATURE_ULTRAVISOR

2019-08-29T23:40:15Z

In PEF enabled systems, some of the resources which were previously hypervisor privileged are now ultravisor privileged and controlled by the ultravisor firmware. This adds FW_FEATURE_ULTRAVISOR to indicate if PEF is enabled. The host kernel can use FW_FEATURE_ULTRAVISOR, for instance, to skip accessing resources (e.g. PTCR and LDBAR) in case PEF is enabled. Signed-off-by: Claudio Carvalho [ andmike: Device node name to "ibm,ultravisor" ] Signed-off-by: Michael Anderson Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20190822034838.27876-4-cclaudio@linux.ibm.com

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

powerpc: use memblock functions returning virtual address

2019-03-12T17:04:01Z

Since only the virtual address of allocated blocks is used, lets use functions returning directly virtual address. Those functions have the advantage of also zeroing the block. [rppt@linux.ibm.com: powerpc: remove duplicated alloc_stack() function] Link: http://lkml.kernel.org/r/20190226064032.GA5873@rapoport-lnx [rppt@linux.ibm.com: updated error message in alloc_stack() to be more verbose] [rppt@linux.ibm.com: convereted several additional call sites ] Link: http://lkml.kernel.org/r/1548057848-15136-3-git-send-email-rppt@linux.ibm.com Signed-off-by: Christophe Leroy Signed-off-by: Mike Rapoport Acked-by: Michael Ellerman Cc: Catalin Marinas Cc: Christoph Hellwig Cc: "David S. Miller" Cc: Dennis Zhou Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Kroah-Hartman Cc: Guan Xuetao Cc: Guo Ren Cc: Guo Ren [c-sky] Cc: Heiko Carstens Cc: Juergen Gross [Xen] Cc: Mark Salter Cc: Matt Turner Cc: Max Filippov Cc: Michal Simek Cc: Paul Burton Cc: Petr Mladek Cc: Richard Weinberger Cc: Rich Felker Cc: Rob Herring Cc: Rob Herring Cc: Russell King Cc: Stafford Horne Cc: Tony Luck Cc: Vineet Gupta Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds