kernel.git/arch/powerpc/kernel/optprobes_head.S, branch linux-rolling-stable

powerpc: add definition for pt_regs offset within an interrupt frame

2022-12-02T06:54:08Z

This is a common offset that currently uses the overloaded STACK_FRAME_OVERHEAD constant. It's easier to read and more flexible to use a specific regs offset for this. Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20221127124942.1665522-8-npiggin@gmail.com

powerpc/64: provide a helper macro to load r2 with the kernel TOC

2022-09-28T09:22:12Z

A later change stops the kernel using r2 and loads it with a poison value. Provide a PACATOC loading abstraction which can hide this detail. Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220926034057.2360083-5-npiggin@gmail.com

powerpc: flexible GPR range save/restore macros

2021-11-29T12:15:20Z

Introduce macros that operate on a (start, end) range of GPRs, which reduces lines of code and need to do mental arithmetic while reading the code. Signed-off-by: Nicholas Piggin Reviewed-by: Segher Boessenkool Reviewed-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20211022061322.2671178-1-npiggin@gmail.com

powerpc: Enable OPTPROBES on PPC32

2021-04-21T12:52:32Z

For that, create a 32 bits version of patch_imm64_load_insns() and create a patch_imm_load_insns() which calls patch_imm32_load_insns() on PPC32 and patch_imm64_load_insns() on PPC64. Adapt optprobes_head.S for PPC32. Use PPC_LL/PPC_STL macros instead of raw ld/std, opt out things linked to paca and use stmw/lmw to save/restore registers. Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/bad58c66859b2a475c0ad516b53164ae3b4853cd.1618927318.git.christophe.leroy@csgroup.eu

powerpc: Add prefixed instructions to instruction data type

2020-05-18T14:10:39Z

For powerpc64, redefine the ppc_inst type so both word and prefixed instructions can be represented. On powerpc32 the type will remain the same. Update places which had assumed instructions to be 4 bytes long. Signed-off-by: Jordan Niethe Reviewed-by: Alistair Popple [mpe: Rework the get_user_inst() macros to be parameterised, and don't assign to the dest if an error occurred. Use CONFIG_PPC64 not __powerpc64__ in a few places. Address other comments from Christophe. Fix some sparse complaints.] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200506034050.24806-24-jniethe5@gmail.com

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

powerpc/64: Rename soft_enabled to irq_soft_mask

2018-01-19T11:37:01Z

Rename the paca->soft_enabled to paca->irq_soft_mask as it is no longer used as a flag for interrupt state, but a mask. Signed-off-by: Madhavan Srinivasan Signed-off-by: Michael Ellerman

powerpc/kprobes: Don't save/restore DAR/DSISR to/from pt_regs for optprobes

2017-08-24T06:19:01Z

We don't save/restore these across a trap, or with KPROBES_ON_FTRACE. Signed-off-by: Naveen N. Rao Signed-off-by: Michael Ellerman

powerpc/optprobes: Fix TOC handling in optprobes trampoline

2017-02-22T21:23:30Z

Optprobes on powerpc are limited to kernel text area. We decided to also optimize kretprobe_trampoline since that is also in kernel text area. However,we failed to take into consideration the fact that the same trampoline is also used to catch function returns from kernel modules. As an example: $ sudo modprobe kobject-example $ sudo bash -c "echo 'r foo_show+8' > /sys/kernel/debug/tracing/kprobe_events" $ sudo bash -c "echo 1 > /sys/kernel/debug/tracing/events/kprobes/enable" $ sudo cat /sys/kernel/debug/kprobes/list c000000000041350 k kretprobe_trampoline+0x0 [OPTIMIZED] d000000000e00200 r foo_show+0x8 kobject_example $ cat /sys/kernel/kobject_example/foo Segmentation fault With the below (trimmed) splat in dmesg: Unable to handle kernel paging request for data at address 0xfec40000 Faulting instruction address: 0xc000000000041540 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c000000000041540] optimized_callback+0x70/0xe0 LR [c000000000041e60] optinsn_slot+0xf8/0x10000 Call Trace: [c0000000c7327850] [c000000000289af4] alloc_set_pte+0x1c4/0x860 (unreliable) [c0000000c7327890] [c000000000041e60] optinsn_slot+0xf8/0x10000 --- interrupt: 700 at 0xc0000000c7327a80 LR = kretprobe_trampoline+0x0/0x10 [c0000000c7327ba0] [c0000000003a30d4] sysfs_kf_seq_show+0x104/0x1d0 [c0000000c7327bf0] [c0000000003a0bb4] kernfs_seq_show+0x44/0x60 [c0000000c7327c10] [c000000000330578] seq_read+0xf8/0x560 [c0000000c7327cb0] [c0000000003a1e64] kernfs_fop_read+0x194/0x260 [c0000000c7327d00] [c0000000002f9954] __vfs_read+0x44/0x1a0 [c0000000c7327d90] [c0000000002fb4cc] vfs_read+0xbc/0x1b0 [c0000000c7327de0] [c0000000002fd138] SyS_read+0x68/0x110 [c0000000c7327e30] [c00000000000b8e0] system_call+0x38/0xfc Fix this by loading up the kernel TOC before calling into the kernel. The original TOC gets restored as part of the usual pt_regs restore. Fixes: 762df10bad69 ("powerpc/kprobes: Optimize kprobe in kretprobe_trampoline()") Signed-off-by: Naveen N. Rao Signed-off-by: Michael Ellerman

powerpc/kprobes: Implement Optprobes

2017-02-10T02:28:04Z

Current infrastructure of kprobe uses the unconditional trap instruction to probe a running kernel. Optprobe allows kprobe to replace the trap with a branch instruction to a detour buffer. Detour buffer contains instructions to create an in memory pt_regs. Detour buffer also has a call to optimized_callback() which in turn call the pre_handler(). After the execution of the pre-handler, a call is made for instruction emulation. The NIP is determined in advanced through dummy instruction emulation and a branch instruction is created to the NIP at the end of the trampoline. To address the limitation of branch instruction in POWER architecture, detour buffer slot is allocated from a reserved area. For the time being, 64KB is reserved in memory for this purpose. Instructions which can be emulated using analyse_instr() are the candidates for optimization. Before optimization ensure that the address range between the detour buffer allocated and the instruction being probed is within +/- 32MB. Signed-off-by: Anju T Sudhakar Signed-off-by: Naveen N. Rao Acked-by: Masami Hiramatsu Signed-off-by: Michael Ellerman