kernel.git/arch/powerpc/kernel/iommu.c, branch linux-rolling-stable

Merge tag 'dma-mapping-6.19-2025-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux

2025-12-06T17:25:05Z

Pull dma-mapping updates from Marek Szyprowski: - More DMA mapping API refactoring to physical addresses as the primary interface instead of page+offset parameters. This time dma_map_ops callbacks are converted to physical addresses, what in turn results also in some simplification of architecture specific code (Leon Romanovsky and Jason Gunthorpe) - Clarify that dma_map_benchmark is not a kernel self-test, but standalone tool (Qinxin Xia) * tag 'dma-mapping-6.19-2025-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux: dma-mapping: remove unused map_page callback xen: swiotlb: Convert mapping routine to rely on physical address x86: Use physical address for DMA mapping sparc: Use physical address DMA mapping powerpc: Convert to physical address DMA mapping parisc: Convert DMA map_page to map_phys interface MIPS/jazzdma: Provide physical address directly alpha: Convert mapping routine to rely on physical address dma-mapping: remove unused mapping resource callbacks xen: swiotlb: Switch to physical address mapping callbacks ARM: dma-mapping: Switch to physical address mapping callbacks ARM: dma-mapping: Reduce struct page exposure in arch_sync_dma*() dma-mapping: convert dummy ops to physical address mapping dma-mapping: prepare dma_map_ops to conversion to physical address tools/dma: move dma_map_benchmark from selftests to tools/dma

powerpc: Convert to physical address DMA mapping

2025-10-29T09:27:30Z

Adapt PowerPC DMA to use physical addresses in order to prepare code to removal .map_page and .unmap_page. Signed-off-by: Leon Romanovsky Signed-off-by: Marek Szyprowski Link: https://lore.kernel.org/r/20251015-remove-map-page-v5-10-3bbfe3a25cdf@kernel.org

iommu: Pass in old domain to attach_dev callback functions

2025-10-27T12:55:35Z

The IOMMU core attaches each device to a default domain on probe(). Then, every new "attach" operation has a fundamental meaning of two-fold: - detach from its currently attached (old) domain - attach to a given new domain Modern IOMMU drivers following this pattern usually want to clean up the things related to the old domain, so they call iommu_get_domain_for_dev() to fetch the old domain. Pass in the old domain pointer from the core to drivers, aligning with the set_dev_pasid op that does so already. Ensure all low-level attach fcuntions in the core can forward the correct old domain pointer. Thus, rework those functions as well. Suggested-by: Jason Gunthorpe Reviewed-by: Kevin Tian Reviewed-by: Jason Gunthorpe Signed-off-by: Nicolin Chen Reviewed-by: Lu Baolu Signed-off-by: Joerg Roedel

powerpc/iommu: Use str_disabled_enabled() helper

2025-05-15T04:35:06Z

Remove hard-coded strings by using the str_disabled_enabled() helper. Signed-off-by: Thorsten Blum Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20250210224246.363318-1-thorsten.blum@linux.dev

powerpc/pseries/iommu: IOMMU incorrectly marks MMIO range in DDW

2025-01-11T05:09:10Z

Power Hypervisor can possibily allocate MMIO window intersecting with Dynamic DMA Window (DDW) range, which is over 32-bit addressing. These MMIO pages needs to be marked as reserved so that IOMMU doesn't map DMA buffers in this range. The current code is not marking these pages correctly which is resulting in LPAR to OOPS while booting. The stack is at below BUG: Unable to handle kernel data access on read at 0xc00800005cd40000 Faulting instruction address: 0xc00000000005cdac Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: af_packet rfkill ibmveth(X) lpfc(+) nvmet_fc nvmet nvme_keyring crct10dif_vpmsum nvme_fc nvme_fabrics nvme_core be2net(+) nvme_auth rtc_generic nfsd auth_rpcgss nfs_acl lockd grace sunrpc fuse configfs ip_tables x_tables xfs libcrc32c dm_service_time ibmvfc(X) scsi_transport_fc vmx_crypto gf128mul crc32c_vpmsum dm_mirror dm_region_hash dm_log dm_multipath dm_mod sd_mod scsi_dh_emc scsi_dh_rdac scsi_dh_alua t10_pi crc64_rocksoft_generic crc64_rocksoft sg crc64 scsi_mod Supported: Yes, External CPU: 8 PID: 241 Comm: kworker/8:1 Kdump: loaded Not tainted 6.4.0-150600.23.14-default #1 SLE15-SP6 b44ee71c81261b9e4bab5e0cde1f2ed891d5359b Hardware name: IBM,9080-M9S POWER9 (raw) 0x4e2103 0xf000005 of:IBM,FW950.B0 (VH950_149) hv:phyp pSeries Workqueue: events work_for_cpu_fn NIP: c00000000005cdac LR: c00000000005e830 CTR: 0000000000000000 REGS: c00001400c9ff770 TRAP: 0300 Not tainted (6.4.0-150600.23.14-default) MSR: 800000000280b033 CR: 24228448 XER: 00000001 CFAR: c00000000005cdd4 DAR: c00800005cd40000 DSISR: 40000000 IRQMASK: 0 GPR00: c00000000005e830 c00001400c9ffa10 c000000001987d00 c00001400c4fe800 GPR04: 0000080000000000 0000000000000001 0000000004000000 0000000000800000 GPR08: 0000000004000000 0000000000000001 c00800005cd40000 ffffffffffffffff GPR12: 0000000084228882 c00000000a4c4f00 0000000000000010 0000080000000000 GPR16: c00001400c4fe800 0000000004000000 0800000000000000 c00000006088b800 GPR20: c00001401a7be980 c00001400eff3800 c000000002a2da68 000000000000002b GPR24: c0000000026793a8 c000000002679368 000000000000002a c0000000026793c8 GPR28: 000008007effffff 0000080000000000 0000000000800000 c00001400c4fe800 NIP [c00000000005cdac] iommu_table_reserve_pages+0xac/0x100 LR [c00000000005e830] iommu_init_table+0x80/0x1e0 Call Trace: [c00001400c9ffa10] [c00000000005e810] iommu_init_table+0x60/0x1e0 (unreliable) [c00001400c9ffa90] [c00000000010356c] iommu_bypass_supported_pSeriesLP+0x9cc/0xe40 [c00001400c9ffc30] [c00000000005c300] dma_iommu_dma_supported+0xf0/0x230 [c00001400c9ffcb0] [c00000000024b0c4] dma_supported+0x44/0x90 [c00001400c9ffcd0] [c00000000024b14c] dma_set_mask+0x3c/0x80 [c00001400c9ffd00] [c0080000555b715c] be_probe+0xc4/0xb90 [be2net] [c00001400c9ffdc0] [c000000000986f3c] local_pci_probe+0x6c/0x110 [c00001400c9ffe40] [c000000000188f28] work_for_cpu_fn+0x38/0x60 [c00001400c9ffe70] [c00000000018e454] process_one_work+0x314/0x620 [c00001400c9fff10] [c00000000018f280] worker_thread+0x2b0/0x620 [c00001400c9fff90] [c00000000019bb18] kthread+0x148/0x150 [c00001400c9fffe0] [c00000000000ded8] start_kernel_thread+0x14/0x18 There are 2 issues in the code 1. The index is "int" while the address is "unsigned long". This results in negative value when setting the bitmap. 2. The DMA offset is page shifted but the MMIO range is used as-is (64-bit address). MMIO address needs to be page shifted as well. Fixes: 3c33066a2190 ("powerpc/kernel/iommu: Add new iommu_table_in_use() helper") Signed-off-by: Gaurav Batra Reviewed-by: Nilay Shroff Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20241206210039.93172-1-gbatra@linux.ibm.com

powerpc/iommu: Reimplement the iommu_table_group_ops for pSeries

2024-06-28T07:03:40Z

PPC64 IOMMU API defines iommu_table_group_ops which handles DMA windows for PEs, their ownership transfer, create/set/unset the TCE tables for the Dynamic DMA wundows(DDW). VFIOS uses these APIs for support on POWER. The commit 9d67c9433509 ("powerpc/iommu: Add "borrowing" iommu_table_group_ops") implemented partial support for this API with "borrow" mechanism wherein the DMA windows if created already by the host driver, they would be available for VFIO to use. Also, it didn't have the support to control/modify the window size or the IO page size. The current patch implements all the necessary iommu_table_group_ops APIs there by avoiding the "borrrowing". So, just the way it is on the PowerNV platform, with this patch the iommu table group ownership is transferred to the VFIO PPC subdriver, the iommu table, DMA windows creation/deletion all driven through the APIs. The pSeries uses the query-pe-dma-window, create-pe-dma-window and reset-pe-dma-window RTAS calls for DMA window creation, deletion and reset to defaul. The RTAs calls do show some minor differences to the way things are to be handled on the pSeries which are listed below. * On pSeries, the default DMA window size is "fixed" cannot be custom sized as requested by the user. For non-SRIOV VFs, It is fixed at 2GB and for SRIOV VFs, its variable sized based on the capacity assigned to it during the VF assignment to the LPAR. So, for the default DMA window alone the size if requested less than tce32_size, the smaller size is enforced using the iommu table->it_size. * The DMA start address for 32-bit window is 0, and for the 64-bit window in case of PowerNV is hardcoded to TVE select (bit 59) at 512PiB offset. This address is returned at the time of create_table() API call (even before the window is created), the subsequent set_window() call actually opens the DMA window. On pSeries, the DMA start address for 32-bit window is known from the 'ibm,dma-window' DT property. However, the 64-bit window start address is not known until the create-pe-dma RTAS call is made. So, the create_table() which returns the DMA window start address actually opens the DMA window and returns the DMA start address as returned by the Hypervisor for the create-pe-dma RTAS call. * The reset-pe-dma RTAS call resets the DMA windows and restores the default DMA window, however it does not clear the TCE table entries if there are any. In case of ownership transfer from platform domain which used direct mapping, the patch chooses remove-pe-dma instead of reset-pe for the 64-bit window intentionally so that the clear_dma_window() is called. Other than the DMA window management changes mentioned above, the patch also brings back the userspace view for the single level TCE as it existed before commit 090bad39b237a ("powerpc/powernv: Add indirect levels to it_userspace") along with the relavent refactoring. Signed-off-by: Shivaprasad G Bhat Signed-off-by: Michael Ellerman Link: https://msgid.link/171923275958.1397.907964437142542242.stgit@linux.ibm.com

powerpc/iommu: Move dev_has_iommu_table() to iommu.c

2024-06-28T07:03:40Z

Move function dev_has_iommu_table() to powerpc/kernel/iommu.c as it is going to be used by machine specific iommu code as well in subsequent patches. Signed-off-by: Shivaprasad G Bhat Signed-off-by: Michael Ellerman Link: https://msgid.link/171923274748.1397.6274953248403106679.stgit@linux.ibm.com

powerpc/iommu: Move pSeries specific functions to pseries/iommu.c

2024-06-28T07:03:38Z

The PowerNV specific table_group_ops are defined in powernv/pci-ioda.c. The pSeries specific table_group_ops are sitting in the generic powerpc file. Move it to where it actually belong(pseries/iommu.c). The functions are currently defined even for CONFIG_PPC_POWERNV which are unused on PowerNV. Only code movement, no functional changes intended. Signed-off-by: Shivaprasad G Bhat Signed-off-by: Michael Ellerman Link: https://msgid.link/171923269701.1397.15758640002786937132.stgit@linux.ibm.com

Merge tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2024-05-19T16:21:03Z

Pull mm updates from Andrew Morton: "The usual shower of singleton fixes and minor series all over MM, documented (hopefully adequately) in the respective changelogs. Notable series include: - Lucas Stach has provided some page-mapping cleanup/consolidation/ maintainability work in the series "mm/treewide: Remove pXd_huge() API". - In the series "Allow migrate on protnone reference with MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's MPOL_PREFERRED_MANY mode, yielding almost doubled performance in one test. - In their series "Memory allocation profiling" Kent Overstreet and Suren Baghdasaryan have contributed a means of determining (via /proc/allocinfo) whereabouts in the kernel memory is being allocated: number of calls and amount of memory. - Matthew Wilcox has provided the series "Various significant MM patches" which does a number of rather unrelated things, but in largely similar code sites. - In his series "mm: page_alloc: freelist migratetype hygiene" Johannes Weiner has fixed the page allocator's handling of migratetype requests, with resulting improvements in compaction efficiency. - In the series "make the hugetlb migration strategy consistent" Baolin Wang has fixed a hugetlb migration issue, which should improve hugetlb allocation reliability. - Liu Shixin has hit an I/O meltdown caused by readahead in a memory-tight memcg. Addressed in the series "Fix I/O high when memory almost met memcg limit". - In the series "mm/filemap: optimize folio adding and splitting" Kairui Song has optimized pagecache insertion, yielding ~10% performance improvement in one test. - Baoquan He has cleaned up and consolidated the early zone initialization code in the series "mm/mm_init.c: refactor free_area_init_core()". - Baoquan has also redone some MM initializatio code in the series "mm/init: minor clean up and improvement". - MM helper cleanups from Christoph Hellwig in his series "remove follow_pfn". - More cleanups from Matthew Wilcox in the series "Various page->flags cleanups". - Vlastimil Babka has contributed maintainability improvements in the series "memcg_kmem hooks refactoring". - More folio conversions and cleanups in Matthew Wilcox's series: "Convert huge_zero_page to huge_zero_folio" "khugepaged folio conversions" "Remove page_idle and page_young wrappers" "Use folio APIs in procfs" "Clean up __folio_put()" "Some cleanups for memory-failure" "Remove page_mapping()" "More folio compat code removal" - David Hildenbrand chipped in with "fs/proc/task_mmu: convert hugetlb functions to work on folis". - Code consolidation and cleanup work related to GUP's handling of hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2". - Rick Edgecombe has developed some fixes to stack guard gaps in the series "Cover a guard gap corner case". - Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the series "mm/ksm: fix ksm exec support for prctl". - Baolin Wang has implemented NUMA balancing for multi-size THPs. This is a simple first-cut implementation for now. The series is "support multi-size THP numa balancing". - Cleanups to vma handling helper functions from Matthew Wilcox in the series "Unify vma_address and vma_pgoff_address". - Some selftests maintenance work from Dev Jain in the series "selftests/mm: mremap_test: Optimizations and style fixes". - Improvements to the swapping of multi-size THPs from Ryan Roberts in the series "Swap-out mTHP without splitting". - Kefeng Wang has significantly optimized the handling of arm64's permission page faults in the series "arch/mm/fault: accelerate pagefault when badaccess" "mm: remove arch's private VM_FAULT_BADMAP/BADACCESS" - GUP cleanups from David Hildenbrand in "mm/gup: consistently call it GUP-fast". - hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault path to use struct vm_fault". - selftests build fixes from John Hubbard in the series "Fix selftests/mm build without requiring "make headers"". - Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the series "Improved Memory Tier Creation for CPUless NUMA Nodes". Fixes the initialization code so that migration between different memory types works as intended. - David Hildenbrand has improved follow_pte() and fixed an errant driver in the series "mm: follow_pte() improvements and acrn follow_pte() fixes". - David also did some cleanup work on large folio mapcounts in his series "mm: mapcount for large folios + page_mapcount() cleanups". - Folio conversions in KSM in Alex Shi's series "transfer page to folio in KSM". - Barry Song has added some sysfs stats for monitoring multi-size THP's in the series "mm: add per-order mTHP alloc and swpout counters". - Some zswap cleanups from Yosry Ahmed in the series "zswap same-filled and limit checking cleanups". - Matthew Wilcox has been looking at buffer_head code and found the documentation to be lacking. The series is "Improve buffer head documentation". - Multi-size THPs get more work, this time from Lance Yang. His series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free" optimizes the freeing of these things. - Kemeng Shi has added more userspace-visible writeback instrumentation in the series "Improve visibility of writeback". - Kemeng Shi then sent some maintenance work on top in the series "Fix and cleanups to page-writeback". - Matthew Wilcox reduces mmap_lock traffic in the anon vma code in the series "Improve anon_vma scalability for anon VMAs". Intel's test bot reported an improbable 3x improvement in one test. - SeongJae Park adds some DAMON feature work in the series "mm/damon: add a DAMOS filter type for page granularity access recheck" "selftests/damon: add DAMOS quota goal test" - Also some maintenance work in the series "mm/damon/paddr: simplify page level access re-check for pageout" "mm/damon: misc fixes and improvements" - David Hildenbrand has disabled some known-to-fail selftests ni the series "selftests: mm: cow: flag vmsplice() hugetlb tests as XFAIL". - memcg metadata storage optimizations from Shakeel Butt in "memcg: reduce memory consumption by memcg stats". - DAX fixes and maintenance work from Vishal Verma in the series "dax/bus.c: Fixups for dax-bus locking"" * tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits) memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault selftests: cgroup: add tests to verify the zswap writeback path mm: memcg: make alloc_mem_cgroup_per_node_info() return bool mm/damon/core: fix return value from damos_wmark_metric_value mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED selftests: cgroup: remove redundant enabling of memory controller Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT Docs/mm/damon/design: use a list for supported filters Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file selftests/damon: classify tests for functionalities and regressions selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None' selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts selftests/damon/_damon_sysfs: check errors from nr_schemes file reads mm/damon/core: initialize ->esz_bp from damos_quota_init_priv() selftests/damon: add a test for DAMOS quota goal ...

fix missing vmalloc.h includes

2024-04-26T03:55:49Z

Patch series "Memory allocation profiling", v6. Overview: Low overhead [1] per-callsite memory allocation profiling. Not just for debug kernels, overhead low enough to be deployed in production. Example output: root@moria-kvm:~# sort -rn /proc/allocinfo 127664128 31168 mm/page_ext.c:270 func:alloc_page_ext 56373248 4737 mm/slub.c:2259 func:alloc_slab_page 14880768 3633 mm/readahead.c:247 func:page_cache_ra_unbounded 14417920 3520 mm/mm_init.c:2530 func:alloc_large_system_hash 13377536 234 block/blk-mq.c:3421 func:blk_mq_alloc_rqs 11718656 2861 mm/filemap.c:1919 func:__filemap_get_folio 9192960 2800 kernel/fork.c:307 func:alloc_thread_stack_node 4206592 4 net/netfilter/nf_conntrack_core.c:2567 func:nf_ct_alloc_hashtable 4136960 1010 drivers/staging/ctagmod/ctagmod.c:20 [ctagmod] func:ctagmod_start 3940352 962 mm/memory.c:4214 func:alloc_anon_folio 2894464 22613 fs/kernfs/dir.c:615 func:__kernfs_new_node ... Usage: kconfig options: - CONFIG_MEM_ALLOC_PROFILING - CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT - CONFIG_MEM_ALLOC_PROFILING_DEBUG adds warnings for allocations that weren't accounted because of a missing annotation sysctl: /proc/sys/vm/mem_profiling Runtime info: /proc/allocinfo Notes: [1]: Overhead To measure the overhead we are comparing the following configurations: (1) Baseline with CONFIG_MEMCG_KMEM=n (2) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n) (3) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y) (4) Enabled at runtime (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n && /proc/sys/vm/mem_profiling=1) (5) Baseline with CONFIG_MEMCG_KMEM=y && allocating with __GFP_ACCOUNT (6) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n) && CONFIG_MEMCG_KMEM=y (7) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y) && CONFIG_MEMCG_KMEM=y Performance overhead: To evaluate performance we implemented an in-kernel test executing multiple get_free_page/free_page and kmalloc/kfree calls with allocation sizes growing from 8 to 240 bytes with CPU frequency set to max and CPU affinity set to a specific CPU to minimize the noise. Below are results from running the test on Ubuntu 22.04.2 LTS with 6.8.0-rc1 kernel on 56 core Intel Xeon: kmalloc pgalloc (1 baseline) 6.764s 16.902s (2 default disabled) 6.793s (+0.43%) 17.007s (+0.62%) (3 default enabled) 7.197s (+6.40%) 23.666s (+40.02%) (4 runtime enabled) 7.405s (+9.48%) 23.901s (+41.41%) (5 memcg) 13.388s (+97.94%) 48.460s (+186.71%) (6 def disabled+memcg) 13.332s (+97.10%) 48.105s (+184.61%) (7 def enabled+memcg) 13.446s (+98.78%) 54.963s (+225.18%) Memory overhead: Kernel size: text data bss dec diff (1) 26515311 18890222 17018880 62424413 (2) 26524728 19423818 16740352 62688898 264485 (3) 26524724 19423818 16740352 62688894 264481 (4) 26524728 19423818 16740352 62688898 264485 (5) 26541782 18964374 16957440 62463596 39183 Memory consumption on a 56 core Intel CPU with 125GB of memory: Code tags: 192 kB PageExts: 262144 kB (256MB) SlabExts: 9876 kB (9.6MB) PcpuExts: 512 kB (0.5MB) Total overhead is 0.2% of total memory. Benchmarks: Hackbench tests run 100 times: hackbench -s 512 -l 200 -g 15 -f 25 -P baseline disabled profiling enabled profiling avg 0.3543 0.3559 (+0.0016) 0.3566 (+0.0023) stdev 0.0137 0.0188 0.0077 hackbench -l 10000 baseline disabled profiling enabled profiling avg 6.4218 6.4306 (+0.0088) 6.5077 (+0.0859) stdev 0.0933 0.0286 0.0489 stress-ng tests: stress-ng --class memory --seq 4 -t 60 stress-ng --class cpu --seq 4 -t 60 Results posted at: https://evilpiepirate.org/~kent/memalloc_prof_v4_stress-ng/ [2] https://lore.kernel.org/all/20240306182440.2003814-1-surenb@google.com/ This patch (of 37): The next patch drops vmalloc.h from a system header in order to fix a circular dependency; this adds it to all the files that were pulling it in implicitly. [kent.overstreet@linux.dev: fix arch/alpha/lib/memcpy.c] Link: https://lkml.kernel.org/r/20240327002152.3339937-1-kent.overstreet@linux.dev [surenb@google.com: fix arch/x86/mm/numa_32.c] Link: https://lkml.kernel.org/r/20240402180933.1663992-1-surenb@google.com [kent.overstreet@linux.dev: a few places were depending on sizes.h] Link: https://lkml.kernel.org/r/20240404034744.1664840-1-kent.overstreet@linux.dev [arnd@arndb.de: fix mm/kasan/hw_tags.c] Link: https://lkml.kernel.org/r/20240404124435.3121534-1-arnd@kernel.org [surenb@google.com: fix arc build] Link: https://lkml.kernel.org/r/20240405225115.431056-1-surenb@google.com Link: https://lkml.kernel.org/r/20240321163705.3067592-1-surenb@google.com Link: https://lkml.kernel.org/r/20240321163705.3067592-2-surenb@google.com Signed-off-by: Kent Overstreet Signed-off-by: Suren Baghdasaryan Signed-off-by: Arnd Bergmann Reviewed-by: Pasha Tatashin Tested-by: Kees Cook Cc: Alexander Viro Cc: Alex Gaynor Cc: Alice Ryhl Cc: Andreas Hindborg Cc: Benno Lossin Cc: "Björn Roy Baron" Cc: Boqun Feng Cc: Christoph Lameter Cc: Dennis Zhou Cc: Gary Guo Cc: Miguel Ojeda Cc: Peter Zijlstra Cc: Tejun Heo Cc: Vlastimil Babka Cc: Wedson Almeida Filho Signed-off-by: Andrew Morton