kernel.git/arch/powerpc/kernel/exceptions-64s.S, branch linux-2.6.37.y

Merge branch 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2010-10-24T19:47:25Z

* 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (321 commits) KVM: Drop CONFIG_DMAR dependency around kvm_iommu_map_pages KVM: Fix signature of kvm_iommu_map_pages stub KVM: MCE: Send SRAR SIGBUS directly KVM: MCE: Add MCG_SER_P into KVM_MCE_CAP_SUPPORTED KVM: fix typo in copyright notice KVM: Disable interrupts around get_kernel_ns() KVM: MMU: Avoid sign extension in mmu_alloc_direct_roots() pae root address KVM: MMU: move access code parsing to FNAME(walk_addr) function KVM: MMU: audit: check whether have unsync sps after root sync KVM: MMU: audit: introduce audit_printk to cleanup audit code KVM: MMU: audit: unregister audit tracepoints before module unloaded KVM: MMU: audit: fix vcpu's spte walking KVM: MMU: set access bit for direct mapping KVM: MMU: cleanup for error mask set while walk guest page table KVM: MMU: update 'root_hpa' out of loop in PAE shadow path KVM: x86 emulator: Eliminate compilation warning in x86_decode_insn() KVM: x86: Fix constant type in kvm_get_time_scale KVM: VMX: Add AX to list of registers clobbered by guest switch KVM guest: Move a printk that's using the clock before it's ready KVM: x86: TSC catchup mode ...

KVM: PPC: Move KVM trampolines before __end_interrupts

2010-10-24T08:50:59Z

When using a relocatable kernel we need to make sure that the trampline code and the interrupt handlers are both copied to low memory. The only way to do this reliably is to put them in the copied section. This patch should make relocated kernels work with KVM. KVM-Stable-Tag Signed-off-by: Alexander Graf Signed-off-by: Avi Kivity

Fix IRQ flag handling naming

2010-10-07T13:08:55Z

Fix the IRQ flag handling naming. In linux/irqflags.h under one configuration, it maps: local_irq_enable() -> raw_local_irq_enable() local_irq_disable() -> raw_local_irq_disable() local_irq_save() -> raw_local_irq_save() ... and under the other configuration, it maps: raw_local_irq_enable() -> local_irq_enable() raw_local_irq_disable() -> local_irq_disable() raw_local_irq_save() -> local_irq_save() ... This is quite confusing. There should be one set of names expected of the arch, and this should be wrapped to give another set of names that are expected by users of this facility. Change this to have the arch provide: flags = arch_local_save_flags() flags = arch_local_irq_save() arch_local_irq_restore(flags) arch_local_irq_disable() arch_local_irq_enable() arch_irqs_disabled_flags(flags) arch_irqs_disabled() arch_safe_halt() Then linux/irqflags.h wraps these to provide: raw_local_save_flags(flags) raw_local_irq_save(flags) raw_local_irq_restore(flags) raw_local_irq_disable() raw_local_irq_enable() raw_irqs_disabled_flags(flags) raw_irqs_disabled() raw_safe_halt() with type checking on the flags 'arguments', and then wraps those to provide: local_save_flags(flags) local_irq_save(flags) local_irq_restore(flags) local_irq_disable() local_irq_enable() irqs_disabled_flags(flags) irqs_disabled() safe_halt() with tracing included if enabled. The arch functions can now all be inline functions rather than some of them having to be macros. Signed-off-by: David Howells [X86, FRV, MN10300] Signed-off-by: Chris Metcalf [Tile] Signed-off-by: Michal Simek [Microblaze] Tested-by: Catalin Marinas [ARM] Acked-by: Thomas Gleixner Acked-by: Haavard Skinnemoen [AVR] Acked-by: Tony Luck [IA-64] Acked-by: Hirokazu Takata [M32R] Acked-by: Greg Ungerer [M68K/M68KNOMMU] Acked-by: Ralf Baechle [MIPS] Acked-by: Kyle McMartin [PA-RISC] Acked-by: Paul Mackerras [PowerPC] Acked-by: Martin Schwidefsky [S390] Acked-by: Chen Liqin [Score] Acked-by: Matt Fleming [SH] Acked-by: David S. Miller [Sparc] Acked-by: Chris Zankel [Xtensa] Reviewed-by: Richard Henderson [Alpha] Reviewed-by: Yoshinori Sato [H8300] Cc: starvik@axis.com [CRIS] Cc: jesper.nilsson@axis.com [CRIS] Cc: linux-cris-kernel@axis.com

powerpc, hw_breakpoints: Implement hw_breakpoints for 64-bit server processors

2010-06-22T09:40:50Z

Implement perf-events based hw-breakpoint interfaces for PowerPC 64-bit server (Book III S) processors. This allows access to a given location to be used as an event that can be counted or profiled by the perf_events subsystem. This is done using the DABR (data breakpoint register), which can also be used for process debugging via ptrace. When perf_event hw_breakpoint support is configured in, the perf_event subsystem manages the DABR and arbitrates access to it, and ptrace then creates a perf_event when it is requested to set a data breakpoint. [Adopted suggestions from Paul Mackerras to - emulate_step() all system-wide breakpoints and single-step only the per-task breakpoints - perform arch-specific cleanup before unregistration through arch_unregister_hw_breakpoint() ] Signed-off-by: K.Prasad Signed-off-by: Paul Mackerras

powerpc: Disable interrupts for data breakpoint exceptions

2010-04-07T04:44:38Z

Data address breakpoint exceptions are currently handled along with page-faults which require interrupts to remain in enabled state. Since exception handling for data breakpoints aren't pre-empt safe, we handle them separately. Signed-off-by: K.Prasad Signed-off-by: Benjamin Herrenschmidt

Merge commit 'origin/master' into next

2009-12-09T06:14:38Z

Conflicts: include/linux/kvm.h

Make head_64.S aware of KVM real mode code

2009-11-05T05:49:57Z

We need to run some KVM trampoline code in real mode. Unfortunately, real mode only covers 8MB on Cell so we need to squeeze ourselves as low as possible. Also, we need to trap interrupts to get us back from guest state to host state without telling Linux about it. This patch adds interrupt traps and includes the KVM code that requires real mode in the real mode parts of Linux. Signed-off-by: Alexander Graf Signed-off-by: Benjamin Herrenschmidt

powerpc: perf_event: Cleanup output by adding symbols

2009-10-28T05:13:05Z

Add some dummy symbols for the branches at 0xf00, 0xf20 and 0xf40, otherwise hits end up in trap_0e which is confusing to the user. Signed-off-by: Anton Blanchard Signed-off-by: Paul Mackerras

Merge commit 'paulus-perf/master' into next

2009-08-20T01:07:56Z

powerpc: Remove use of a second scratch SPRG in STAB code

2009-08-20T00:12:28Z

The STAB code used on Power3 and RS/64 uses a second scratch SPRG to save a GPR in order to decide whether to go to do_stab_bolted_* or to handle a normal data access exception. This prevents our scheme of freeing SPRG3 which is user visible for user uses since we cannot use SPRG0 which, on RS/64, seems to be read-only for supervisor mode (like POWER4). This reworks the STAB exception entry to use the PACA as temporary storage instead. Signed-off-by: Benjamin Herrenschmidt