kernel.git/arch/powerpc/include/uapi, branch linux-3.15.y

powerpc: Add AT_HWCAP2 to indicate V.CRYPTO category support

2014-07-07T01:59:11Z

commit dd58a092c4202f2bd490adab7285b3ff77f8e467 upstream. The Vector Crypto category instructions are supported by current POWER8 chips, advertise them to userspace using a specific bit to properly differentiate with chips of the same architecture level that might not have them. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Greg Kroah-Hartman

powerpc: Wire renameat2() syscall

2014-06-01T23:24:27Z

Signed-off-by: Benjamin Herrenschmidt

powerpc: Bump COMMAND_LINE_SIZE to 2048

2014-04-28T06:31:58Z

I've had a report that the current limit is too small for an automated network based installer. Bump it. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2014-01-31T16:37:32Z

Pull more KVM updates from Paolo Bonzini: "Second batch of KVM updates. Some minor x86 fixes, two s390 guest features that need some handling in the host, and all the PPC changes. The PPC changes include support for little-endian guests and enablement for new POWER8 features" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (45 commits) x86, kvm: correctly access the KVM_CPUID_FEATURES leaf at 0x40000101 x86, kvm: cache the base of the KVM cpuid leaves kvm: x86: move KVM_CAP_HYPERV_TIME outside #ifdef KVM: PPC: Book3S PR: Cope with doorbell interrupts KVM: PPC: Book3S HV: Add software abort codes for transactional memory KVM: PPC: Book3S HV: Add new state for transactional memory powerpc/Kconfig: Make TM select VSX and VMX KVM: PPC: Book3S HV: Basic little-endian guest support KVM: PPC: Book3S HV: Add support for DABRX register on POWER7 KVM: PPC: Book3S HV: Prepare for host using hypervisor doorbells KVM: PPC: Book3S HV: Handle new LPCR bits on POWER8 KVM: PPC: Book3S HV: Handle guest using doorbells for IPIs KVM: PPC: Book3S HV: Consolidate code that checks reason for wake from nap KVM: PPC: Book3S HV: Implement architecture compatibility modes for POWER8 KVM: PPC: Book3S HV: Add handler for HV facility unavailable KVM: PPC: Book3S HV: Flush the correct number of TLB sets on POWER8 KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs KVM: PPC: Book3S HV: Align physical and virtual CPU thread numbers KVM: PPC: Book3S HV: Don't set DABR on POWER8 kvm/ppc: IRQ disabling cleanup ...

powerpc: Wire up sched_setattr and sched_getattr syscalls

2014-01-29T06:13:05Z

Signed-off-by: Benjamin Herrenschmidt

KVM: PPC: Book3S HV: Add software abort codes for transactional memory

2014-01-27T15:01:22Z

This adds the software abort code defines for transactional memory (TM). These values are from PAPR. Signed-off-by: Michael Neuling Signed-off-by: Paul Mackerras Signed-off-by: Alexander Graf

KVM: PPC: Book3S HV: Add support for DABRX register on POWER7

2014-01-27T15:01:15Z

The DABRX (DABR extension) register on POWER7 processors provides finer control over which accesses cause a data breakpoint interrupt. It contains 3 bits which indicate whether to enable accesses in user, kernel and hypervisor modes respectively to cause data breakpoint interrupts, plus one bit that enables both real mode and virtual mode accesses to cause interrupts. Currently, KVM sets DABRX to allow both kernel and user accesses to cause interrupts while in the guest. This adds support for the guest to specify other values for DABRX. PAPR defines a H_SET_XDABR hcall to allow the guest to set both DABR and DABRX with one call. This adds a real-mode implementation of H_SET_XDABR, which shares most of its code with the existing H_SET_DABR implementation. To support this, we add a per-vcpu field to store the DABRX value plus code to get and set it via the ONE_REG interface. For Linux guests to use this new hcall, userspace needs to add "hcall-xdabr" to the set of strings in the /chosen/hypertas-functions property in the device tree. If userspace does this and then migrates the guest to a host where the kernel doesn't include this patch, then userspace will need to implement H_SET_XDABR by writing the specified DABR value to the DABR using the ONE_REG interface. In that case, the old kernel will set DABRX to DABRX_USER | DABRX_KERNEL. That should still work correctly, at least for Linux guests, since Linux guests cope with getting data breakpoint interrupts in modes that weren't requested by just ignoring the interrupt, and Linux guests never set DABRX_BTI. The other thing this does is to make H_SET_DABR and H_SET_XDABR work on POWER8, which has the DAWR and DAWRX instead of DABR/X. Guests that know about POWER8 should use H_SET_MODE rather than H_SET_[X]DABR, but guests running in POWER7 compatibility mode will still use H_SET_[X]DABR. For them, this adds the logic to convert DABR/X values into DAWR/X values on POWER8. Signed-off-by: Paul Mackerras Signed-off-by: Alexander Graf

KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs

2014-01-27T15:01:00Z

This adds fields to the struct kvm_vcpu_arch to store the new guest-accessible SPRs on POWER8, adds code to the get/set_one_reg functions to allow userspace to access this state, and adds code to the guest entry and exit to context-switch these SPRs between host and guest. Note that DPDES (Directed Privileged Doorbell Exception State) is shared between threads on a core; hence we store it in struct kvmppc_vcore and have the master thread save and restore it. Signed-off-by: Michael Neuling Signed-off-by: Paul Mackerras Signed-off-by: Alexander Graf

net: introduce SO_BPF_EXTENSIONS

2014-01-19T03:08:58Z

For user space packet capturing libraries such as libpcap, there's currently only one way to check which BPF extensions are supported by the kernel, that is, commit aa1113d9f85d ("net: filter: return -EINVAL if BPF_S_ANC* operation is not supported"). For querying all extensions at once this might be rather inconvenient. Therefore, this patch introduces a new option which can be used as an argument for getsockopt(), and allows one to obtain information about which BPF extensions are supported by the current kernel. As David Miller suggests, we do not need to define any bits right now and status quo can just return 0 in order to state that this versions supports SKF_AD_PROTOCOL up to SKF_AD_PAY_OFFSET. Later additions to BPF extensions need to add their bits to the bpf_tell_extensions() function, as documented in the comment. Signed-off-by: Michal Sekletar Cc: David Miller Reviewed-by: Daniel Borkmann Signed-off-by: David S. Miller

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2013-11-15T04:51:36Z

Pull KVM changes from Paolo Bonzini: "Here are the 3.13 KVM changes. There was a lot of work on the PPC side: the HV and emulation flavors can now coexist in a single kernel is probably the most interesting change from a user point of view. On the x86 side there are nested virtualization improvements and a few bugfixes. ARM got transparent huge page support, improved overcommit, and support for big endian guests. Finally, there is a new interface to connect KVM with VFIO. This helps with devices that use NoSnoop PCI transactions, letting the driver in the guest execute WBINVD instructions. This includes some nVidia cards on Windows, that fail to start without these patches and the corresponding userspace changes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (146 commits) kvm, vmx: Fix lazy FPU on nested guest arm/arm64: KVM: PSCI: propagate caller endianness to the incoming vcpu arm/arm64: KVM: MMIO support for BE guest kvm, cpuid: Fix sparse warning kvm: Delete prototype for non-existent function kvm_check_iopl kvm: Delete prototype for non-existent function complete_pio hung_task: add method to reset detector pvclock: detect watchdog reset at pvclock read kvm: optimize out smp_mb after srcu_read_unlock srcu: API for barrier after srcu read unlock KVM: remove vm mmap method KVM: IOMMU: hva align mapping page size KVM: x86: trace cpuid emulation when called from emulator KVM: emulator: cleanup decode_register_operand() a bit KVM: emulator: check rex prefix inside decode_register() KVM: x86: fix emulation of "movzbl %bpl, %eax" kvm_host: typo fix KVM: x86: emulate SAHF instruction MAINTAINERS: add tree for kvm.git Documentation/kvm: add a 00-INDEX file ...