kernel.git/arch/powerpc/include/asm/reg.h, branch linux-3.8.y

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

2012-12-18T17:58:09Z

Pull powerpc update from Benjamin Herrenschmidt: "The main highlight is probably some base POWER8 support. There's more to come such as transactional memory support but that will wait for the next one. Overall it's pretty quiet, or rather I've been pretty poor at picking things up from patchwork and reviewing them this time around and Kumar no better on the FSL side it seems..." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (73 commits) powerpc+of: Rename and fix OF reconfig notifier error inject module powerpc: mpc5200: Add a3m071 board support powerpc/512x: don't compile any platform DIU code if the DIU is not enabled powerpc/mpc52xx: use module_platform_driver macro powerpc+of: Export of_reconfig_notifier_[register,unregister] powerpc/dma/raidengine: add raidengine device powerpc/iommu/fsl: Add PAMU bypass enable register to ccsr_guts struct powerpc/mpc85xx: Change spin table to cached memory powerpc/fsl-pci: Add PCI controller ATMU PM support powerpc/86xx: fsl_pcibios_fixup_bus requires CONFIG_PCI drivers/virt: the Freescale hypervisor driver doesn't need to check MSR[GS] powerpc/85xx: p1022ds: Use NULL instead of 0 for pointers powerpc: Disable relocation on exceptions when kexecing powerpc: Enable relocation on during exceptions at boot powerpc: Move get_longbusy_msecs into hvcall.h and remove duplicate function powerpc: Add wrappers to enable/disable relocation on exceptions powerpc: Add set_mode hcall powerpc: Setup relocation on exceptions for bare metal systems powerpc: Move initial mfspr LPCR out of __init_LPCR powerpc: Add relocation on exception vector handlers ...

KVM: PPC: Book3S PR: Fix VSX handling

2012-12-06T00:34:02Z

This fixes various issues in how we were handling the VSX registers that exist on POWER7 machines. First, we were running off the end of the current->thread.fpr[] array. Ultimately this was because the vcpu->arch.vsr[] array is sized to be able to store both the FP registers and the extra VSX registers (i.e. 64 entries), but PR KVM only uses it for the extra VSX registers (i.e. 32 entries). Secondly, calling load_up_vsx() from C code is a really bad idea, because it jumps to fast_exception_return at the end, rather than returning with a blr instruction. This was causing it to jump off to a random location with random register contents, since it was using the largely uninitialized stack frame created by kvmppc_load_up_vsx. In fact, it isn't necessary to call either __giveup_vsx or load_up_vsx, since giveup_fpu and load_up_fpu handle the extra VSX registers as well as the standard FP registers on machines with VSX. Also, since VSX instructions can access the VMX registers and the FP registers as well as the extra VSX registers, we have to load up the FP and VMX registers before we can turn on the MSR_VSX bit for the guest. Conversely, if we save away any of the VSX or FP registers, we have to turn off MSR_VSX for the guest. To handle all this, it is more convenient for a single call to kvmppc_giveup_ext() to handle all the state saving that needs to be done, so we make it take a set of MSR bits rather than just one, and the switch statement becomes a series of if statements. Similarly kvmppc_handle_ext needs to be able to load up more than one set of registers. Signed-off-by: Paul Mackerras Signed-off-by: Alexander Graf

powerpc: Setup relocation on exceptions for bare metal systems

2012-11-15T04:08:06Z

This turns on MMU on execptions via AIL field in the LPCR. Signed-off-by: Matt Evans Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt

powerpc: POWER8 cputable entry

2012-11-15T02:00:45Z

Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt

powerpc/perf: Sample only if SIAR-Valid bit is set in P7+

2012-09-27T02:51:05Z

powerpc/perf: Sample only if SIAR-Valid bit is set in P7+ On POWER7+ two new bits (mmcra[35] and mmcra[36]) indicate whether the contents of SIAR and SDAR are valid. For marked instructions on P7+, we must save the contents of SIAR and SDAR registers only if these new bits are set. This code/check for the SIAR-Valid bit is specific to P7+, so rather than waste a CPU-feature bit use the PVR flag. Note that Carl Love proposed a similar change for oprofile: https://lkml.org/lkml/2012/6/22/309 Signed-off-by: Sukadev Bhattiprolu Signed-off-by: Benjamin Herrenschmidt

powerpc: Add denormalisation exception handling for POWER6/7

2012-09-17T06:31:47Z

On POWER6 and POWER7 if the input operand to an instruction is a denormalised single precision binary floating point value we can take a denormalisation exception where it's expected that the hypervisor (HV=1) will fix up the inputs before the instruction is run. This adds code to handle this denormalisation exception for POWER6 and POWER7. It also add a CONFIG_PPC_DENORMALISATION option and sets it in pseries/ppc64_defconfig. This is useful on bare metal systems only. Based on patch from Milton Miller. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt

powerpc: Rework set_dabr so it can take a DABRX value as well

2012-09-09T23:59:10Z

Rework set_dabr to take a DABRX value as well. Both the pseries and PS3 hypervisors do some checks on the DABRX values that are passed in the hcall. This patch stops bogus values from being passed to hypervisor. Also, in the case where we are clearing the breakpoint, where DABR and DABRX are zero, we modify the DABRX value to make it valid so that the hcall won't fail. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt

powerpc: Define Power7+ PV constant PV_POWER7p

2012-09-07T00:47:17Z

This definition will be used by subsequent perf and oprofile patches Signed-off-by: Sukadev Bhattiprolu Signed-off-by: Benjamin Herrenschmidt

powerpc/booke64: Use SPRG0/3 scratch for bolted TLB miss & crit int

2012-09-05T05:35:52Z

Embedded.Hypervisor category defines GSPRG0..3 physical registers for guests. Avoid SPRG4-7 usage as scratch in host exception handlers, otherwise guest SPRG4-7 registers will be clobbered. For bolted TLB miss exception handlers, which is the version currently supported by KVM, use SPRN_SPRG_GEN_SCRATCH aka SPRG0 instead of SPRN_SPRG_TLB_SCRATCH aka SPRG6. Keep using TLB PACA slots to fit in one 64-byte cache line. For critical exception handlers use SPRG3 instead of SPRG7. Provide a routine to store and restore user-visible SPRGs. This will be subsequently used to restore VDSO information in SPRG3. Add EX_R13 to paca slots to free up SPRG3 and change the critical exception epilog to use it. Signed-off-by: Mihai Caraman Signed-off-by: Benjamin Herrenschmidt

powerpc/booke64: Use GSRR registers in Guest Doorbell interrupts

2012-09-05T05:35:43Z

Guest Doorbell interrupts use guest save and restore registers. Add a new Guest Doorbell exception type to accommodate GSRR0/1 SPRs usage in exception prolog and fix the exception handler. Signed-off-by: Mihai Caraman Signed-off-by: Benjamin Herrenschmidt