kernel.git/arch/powerpc/boot/dts, branch linux-5.14.y

powerpc/fsl/dts: Fix phy-connection-type for fm1mac3

2021-10-13T07:41:56Z

[ Upstream commit eed183abc0d3b8adb64fd1363b7cea7986cd58d6 ] Property phy-connection-type contains invalid value "sgmii-2500" per scheme defined in file ethernet-controller.yaml. Correct phy-connection-type value should be "2500base-x". Signed-off-by: Pali Rohár Fixes: 84e0f1c13806 ("powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s)") Acked-by: Scott Wood Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

Merge tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2021-07-02T19:54:34Z

Pull powerpc updates from Michael Ellerman: - A big series refactoring parts of our KVM code, and converting some to C. - Support for ARCH_HAS_SET_MEMORY, and ARCH_HAS_STRICT_MODULE_RWX on some CPUs. - Support for the Microwatt soft-core. - Optimisations to our interrupt return path on 64-bit. - Support for userspace access to the NX GZIP accelerator on PowerVM on Power10. - Enable KUAP and KUEP by default on 32-bit Book3S CPUs. - Other smaller features, fixes & cleanups. Thanks to: Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Baokun Li, Benjamin Herrenschmidt, Bharata B Rao, Christophe Leroy, Daniel Axtens, Daniel Henrique Barboza, Finn Thain, Geoff Levand, Haren Myneni, Jason Wang, Jiapeng Chong, Joel Stanley, Jordan Niethe, Kajol Jain, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Paul Mackerras, Russell Currey, Sathvika Vasireddy, Shaokun Zhang, Stephen Rothwell, Sudeep Holla, Suraj Jitindar Singh, Tom Rix, Vaibhav Jain, YueHaibing, Zhang Jianhua, and Zhen Lei. * tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (218 commits) powerpc: Only build restart_table.c for 64s powerpc/64s: move ret_from_fork etc above __end_soft_masked powerpc/64s/interrupt: clean up interrupt return labels powerpc/64/interrupt: add missing kprobe annotations on interrupt exit symbols powerpc/64: enable MSR[EE] in irq replay pt_regs powerpc/64s/interrupt: preserve regs->softe for NMI interrupts powerpc/64s: add a table of implicit soft-masked addresses powerpc/64e: remove implicit soft-masking and interrupt exit restart logic powerpc/64e: fix CONFIG_RELOCATABLE build warnings powerpc/64s: fix hash page fault interrupt handler powerpc/4xx: Fix setup_kuep() on SMP powerpc/32s: Fix setup_{kuap/kuep}() on SMP powerpc/interrupt: Use names in check_return_regs_valid() powerpc/interrupt: Also use exit_must_hard_disable() on PPC32 powerpc/sysfs: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE powerpc/ptrace: Refactor regs_set_return_{msr/ip} powerpc/ptrace: Move set_return_regs_changed() before regs_set_return_{msr/ip} powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi() powerpc/pseries/vas: Include irqdomain.h powerpc: mark local variables around longjmp as volatile ...

powerpc/microwatt: Use standard 16550 UART for console

2021-06-21T11:16:31Z

This adds support to the Microwatt platform to use the standard 16550-style UART which available in the standalone Microwatt FPGA. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras Reviewed-by: Segher Boessenkool Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/YMwXGCTzedpQje7r@thinks.paulus.ozlabs.org

powerpc/xics: Add a native ICS backend for microwatt

2021-06-21T11:15:58Z

This is a simple native ICS backend that matches the layout of the Microwatt implementation of ICS. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras Reviewed-by: Segher Boessenkool [mpe: Add empty ics_native_init() to unbreak non-microwatt builds] Signed-off-by: Michael Ellerman fixup-ics Link: https://lore.kernel.org/r/YMwW8cxrwB2W5EUN@thinks.paulus.ozlabs.org

powerpc/microwatt: Populate platform bus from device-tree

2021-06-21T11:15:26Z

Just like any other embedded platform. Add an empty soc node. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras Reviewed-by: Segher Boessenkool Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/YMwWx98+PMibZq/G@thinks.paulus.ozlabs.org

powerpc: Add Microwatt device tree

2021-06-21T11:15:26Z

Microwatt currently runs with MSR[HV] = 0, hence the usable-privilege properties don't have bit 2 (for HV support) set, and we need the /chosen/ibm,architecture-vec-5 property. Signed-off-by: Paul Mackerras Reviewed-by: Segher Boessenkool Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/YMwWkPcXlGDSQ9Q3@thinks.paulus.ozlabs.org

powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers

2021-05-27T19:52:16Z

The i2c controllers on the P1010 have an erratum where the documented scheme for i2c bus recovery will not work (A-004447). A different mechanism is needed which is documented in the P1010 Chip Errata Rev L. Signed-off-by: Chris Packham Acked-by: Michael Ellerman Signed-off-by: Wolfram Sang

powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers

2021-05-27T19:52:06Z

The i2c controllers on the P2040/P2041 have an erratum where the documented scheme for i2c bus recovery will not work (A-004447). A different mechanism is needed which is documented in the P2040 Chip Errata Rev Q (latest available at the time of writing). Signed-off-by: Chris Packham Acked-by: Michael Ellerman Signed-off-by: Wolfram Sang

Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2021-04-29T18:57:23Z

Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ...

powerpc: dts: fsl: Drop obsolete fsl,rx-bit-map and fsl,tx-bit-map properties

2021-04-16T22:46:15Z

These are very old properties that were used by the "gianfar" ethernet driver. They don't have documented bindings and are obsolete. Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller