kernel.git/arch/powerpc/boot/dts, branch linux-5.13.y

powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers

2021-05-27T19:52:16Z

The i2c controllers on the P1010 have an erratum where the documented scheme for i2c bus recovery will not work (A-004447). A different mechanism is needed which is documented in the P1010 Chip Errata Rev L. Signed-off-by: Chris Packham Acked-by: Michael Ellerman Signed-off-by: Wolfram Sang

powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers

2021-05-27T19:52:06Z

The i2c controllers on the P2040/P2041 have an erratum where the documented scheme for i2c bus recovery will not work (A-004447). A different mechanism is needed which is documented in the P2040 Chip Errata Rev Q (latest available at the time of writing). Signed-off-by: Chris Packham Acked-by: Michael Ellerman Signed-off-by: Wolfram Sang

Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2021-04-29T18:57:23Z

Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ...

powerpc: dts: fsl: Drop obsolete fsl,rx-bit-map and fsl,tx-bit-map properties

2021-04-16T22:46:15Z

These are very old properties that were used by the "gianfar" ethernet driver. They don't have documented bindings and are obsolete. Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller

xsysace: Remove SYSACE driver

2021-03-23T16:27:38Z

Sysace IP is no longer used on Xilinx PowerPC 405/440 and Microblaze systems. The driver is not regularly tested and very likely not working for quite a long time that's why remove it. Signed-off-by: Michal Simek Signed-off-by: Jens Axboe

Merge tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2020-10-16T19:21:15Z

Pull powerpc updates from Michael Ellerman: - A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting it for powerpc, as well as a related fix for sparc. - Remove support for PowerPC 601. - Some fixes for watchpoints & addition of a new ptrace flag for detecting ISA v3.1 (Power10) watchpoint features. - A fix for kernels using 4K pages and the hash MMU on bare metal Power9 systems with > 16TB of RAM, or RAM on the 2nd node. - A basic idle driver for shallow stop states on Power10. - Tweaks to our sched domains code to better inform the scheduler about the hardware topology on Power9/10, where two SMT4 cores can be presented by firmware as an SMT8 core. - A series doing further reworks & cleanups of our EEH code. - Addition of a filter for RTAS (firmware) calls done via sys_rtas(), to prevent root from overwriting kernel memory. - Other smaller features, fixes & cleanups. Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Athira Rajeev, Biwen Li, Cameron Berkenpas, Cédric Le Goater, Christophe Leroy, Christoph Hellwig, Colin Ian King, Daniel Axtens, David Dai, Finn Thain, Frederic Barrat, Gautham R. Shenoy, Greg Kurz, Gustavo Romero, Ira Weiny, Jason Yan, Joel Stanley, Jordan Niethe, Kajol Jain, Konrad Rzeszutek Wilk, Laurent Dufour, Leonardo Bras, Liu Shixin, Luca Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar, Nathan Lynch, Nicholas Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Pedro Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott Cheloha, Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt, Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang Yingliang, zhengbin. * tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (228 commits) Revert "powerpc/pci: unmap legacy INTx interrupts when a PHB is removed" selftests/powerpc: Fix eeh-basic.sh exit codes cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier powerpc/time: Make get_tb() common to PPC32 and PPC64 powerpc/time: Make get_tbl() common to PPC32 and PPC64 powerpc/time: Remove get_tbu() powerpc/time: Avoid using get_tbl() and get_tbu() internally powerpc/time: Make mftb() common to PPC32 and PPC64 powerpc/time: Rename mftbl() to mftb() powerpc/32s: Remove #ifdef CONFIG_PPC_BOOK3S_32 in head_book3s_32.S powerpc/32s: Rename head_32.S to head_book3s_32.S powerpc/32s: Setup the early hash table at all time. powerpc/time: Remove ifdef in get_dec() and set_dec() powerpc: Remove get_tb_or_rtc() powerpc: Remove __USE_RTC() powerpc: Tidy up a bit after removal of PowerPC 601. powerpc: Remove support for PowerPC 601 powerpc: Remove PowerPC 601 powerpc: Drop SYNC_601() ISYNC_601() and SYNC() powerpc: Remove CONFIG_PPC601_SYNC_FIX ...

powerpc: dts: t1040rdb: add ports for Seville Ethernet switch

2020-10-04T00:02:42Z

Define the network interface names for the switch ports and hook them up to the 2 QSGMII PHYs that are onboard. A conscious decision was taken to go along with the numbers that are written on the front panel of the board and not with the hardware numbers of the switch chip ports. Signed-off-by: Vladimir Oltean Reviewed-by: Maxim Kochetkov Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

powerpc: dts: t1040: add bindings for Seville Ethernet switch

2020-10-04T00:02:42Z

Add the description of the embedded L2 switch inside the SoC dtsi file for NXP T1040. Signed-off-by: Vladimir Oltean Reviewed-by: Maxim Kochetkov Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

powerc/dtc/t1024rdb: remove interrupts property

2020-08-24T15:31:32Z

Since the interrupt pin for RTC DS1339 is not connected to the CPU on T1024RDB, remove the interrupt property from the device tree. This also fix the following warning for hwclock.util-linux: $ hwclock.util-linux hwclock.util-linux: select() to /dev/rtc0 to wait for clock tick timed out Signed-off-by: Biwen Li Acked-by: Li Yang Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200527034228.23793-2-biwen.li@oss.nxp.com

powerpc/dts/t4240rdb: remove interrupts property

2020-08-24T15:31:32Z

Since the interrupt pin for RTC DS1374 is not connected to the CPU on T4240RDB, remove the interrupt property from the device tree. This also fix the following warning for hwclock.util-linux: $ hwclock.util-linux hwclock.util-linux: select() to /dev/rtc0 to wait for clock tick timed out Signed-off-by: Biwen Li Acked-by: Li Yang Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200527034228.23793-1-biwen.li@oss.nxp.com