kernel.git/arch/powerpc/boot/dts, branch linux-2.6.28.y

powerpc/83xx: Fix MCU support merge issue in mpc8349emitx.dts

2008-12-03T15:56:02Z

Just found the merge issue in 442746989d92afc125040e0f29b33602ad94da99 ("powerpc/83xx: Add support for MCU microcontroller in .dts files"): the commit adds the MCU controller node into the DMA node, which is wrong because the MCU sits on the I2C bus. Fix this by moving the MCU node into the I2C controller node. The original patch[1] was OK though. ;-) Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala

powerpc/mpc832x_rdb: fix swapped ethernet ids

2008-11-19T21:12:19Z

ethernet0 (called FSL UEC0 in U-Boot) should be enet1 (UCC3/eth1), and ethernet1 should be enet0 (UCC2/eth0), to be consistent with U-Boot so that the interfaces do not swap addresses when control passes from U-Boot to the kernel. Signed-off-by: Michael Barkowski Acked-by: Kim Phillips Signed-off-by: Kumar Gala

powerpc/85xx: L2 cache size wrong in 8572DS dts

2008-11-19T21:12:15Z

It's 1MB, not 512KB. Newer U-Boots will fix this entry, but that's no reason to have the wrong value in the dts. Signed-off-by: Trent Piepho Signed-off-by: Kumar Gala

powerpc/86xx: Correct SOC bus-frequency in GE Fanuc SBC610 DTS

2008-11-08T18:39:01Z

This patch corrects the bus-frequency value provided in the SBC610's dts. Signed-off-by: Martyn Welch Signed-off-by: Kumar Gala

powerpc: Remove duplicate DMA entry from mpc8313erdb device tree

2008-10-31T07:38:39Z

Commit 574366128db29e7da609ec1f9c01bf9d80adec87 added a duplicate DMA controller node. Signed-off-by: Mike Dyer Signed-off-by: Kumar Gala

Merge commit 'kumar/kumar-for-2.6.28'

2008-10-21T04:49:55Z

powerpc/83xx: Add DS1339 RTC support for MPC8349E-mITX boards .dts

2008-10-21T04:37:32Z

The RTC is sitting on the I2C2 bus at address 0x68. RTC interrupt signal is connected to the IPIC's EXT2 interrupt line, the line is shared with Vitesse 8201 Ethernet PHY. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala

powerpc/83xx: Add support for MCU microcontroller in .dts files

2008-10-21T04:37:00Z

MCU is an external Freescale MC9S08QG8 microcontroller, mainly used to provide soft power-off function, but also exports two GPIOs (wired to the LEDs and also available from the external headers). Added the MCU on mpc8349emitx, mpc837xrdb and mpc8315erdb boards. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala

powerpc/85xx: Move mpc8572ds.dts to address-cells/size-cells = <2>

2008-10-21T04:34:08Z

Change the top-level #address-cells and #size-cells to <2> so the mpc8572ds.dts is easier to deal with both a true 32-bit physical or 36-bit physical address space. Signed-off-by: Kumar Gala

powerpc: Remove device_type = "board_control" properties in .dts files

2008-10-21T04:33:04Z

We don't want to encourage the bogus device_type usage. The device type isn't used in the code, so we can simply remove it from the documentation and dts files. Boards should specify proper compatible entries instead. Signed-off-by: Anton Vorontsov Acked-by: David Gibson Signed-off-by: Kumar Gala