kernel.git/arch/powerpc/boot/dts, branch linux-2.6.25.y

[POWERPC] Fix MPC5200 (not B!) device tree so FEC ethernet works

2008-04-03T11:11:12Z

This gets the FEC ethernet driver working again on the lite5200 platform. The FEC driver is also compatible with the MPC5200, not only with the MPC5200B, so this adds a suitable entry to the driver's match list. Furthermore this adds the settings for the PHY in the dts file for the Lite5200. Note, that this is not exactly the same as in the Lite5200B, because the PHY is located at f0003000:01 for the 5200, and at :00 for the 5200B. This was tested on a Lite5200 and a Lite5200B, both booted a kernel via tftp and mounted the root via nfs successfully. Signed-off-by: René Bürgel Acked-by: Grant Likely Signed-off-by: Paul Mackerras

[POWERPC] mpc5200: Amalgamated DTS fixes and updates

2008-04-03T11:11:12Z

DTS updates that fix booting problems on mpc5200-based boards: - change to ethernet reg property - addition of mdio and phy nodes - removal of pci node (Motion-Pro board) Other DTS updates: - update i2c device tree nodes - add lpb bus node and flash device (without partitions defined) - add rtc i2c nodes Signed-off-by: Marian Balakowicz Acked-by: Grant Likely Signed-off-by: Paul Mackerras

[POWERPC] sata_fsl: reduce compatibility to fsl,pq-sata

2008-03-31T15:27:35Z

as prescribed in Documentation/powerpc/booting-without-of.txt. Signed-off-by: Kim Phillips Acked-by: Jeff Garzik Signed-off-by: Kumar Gala

[POWERPC] 83xx: Fix wrong USB phy type in mpc837xrdb dts

2008-03-31T15:23:48Z

Due to chip constraint MPC837x USB DR module can only use ULPI and serial PHY interfaces. The patch fixes the wrong type in dts. This patch fixes USB malfunctioning on the MPC837xE-RDB boards. Similar patch has been already applied for the MDS boards: commit 28b958859206b7010d03129611c2e444898e3ee4 Author: Li Yang Date: Thu Mar 6 18:42:26 2008 +0800 [POWERPC] 83xx: Fix wrong USB phy type in mpc837xmds dts Signed-off-by: Anton Vorontsov Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala

[POWERPC] mpc5200: Fix incorrect compatible string for the mdio node

2008-03-25T02:18:39Z

The MDIO node in the lite5200b.dts file needs to also claim compatibility with the older mpc5200 chip. Otherwise the driver won't find the device. Signed-off-by: Grant Likely Signed-off-by: Paul Mackerras

[POWERPC] 85xx: sbc8548 - Fix incorrect PCI-X and PCI interrupt map

2008-03-07T22:47:52Z

The following patch allows interrupts to occur on the sbc8548. Currently PCI and PCI-X devices get assigned an IRQ but the interrupt count never increases. This solves the problem and adds PCI support as well. Signed-off-by: Jeremy McNicoll Signed-off-by: Paul Gortmaker Signed-off-by: Kumar Gala

[POWERPC] 83xx: Add local bus device nodes to MPC837xMDS device trees.

2008-03-07T14:42:22Z

Signed-off-by: Li Yang Signed-off-by: Kumar Gala

[POWERPC] 83xx: Fix wrong USB phy type in mpc837xmds dts

2008-03-07T14:42:11Z

Due to chip constraint MPC837x USB DR module can only use ULPI and serial PHY interfaces. The patch fixes the wrong type in dts. Signed-off-by: Li Yang Signed-off-by: Kumar Gala

[POWERPC] 4xx: Fix L1 cache size in katmai DTS

2008-02-27T15:47:11Z

This patch changes the katmai (440SPe) L1 cache size to 32k. Some whitespace issues are cleaned up too. Signed-off-by: Stefan Roese Signed-off-by: Josh Boyer

[POWERPC] 4xx: Fix Haleakala PCIe compatibility problem in dts

2008-02-27T15:43:15Z

Since the 4xx PCIe driver checks for 405ex compatibility, the PCIe interface was not detected as it is currently defined as "405exr" compatible. This patch changes it to "405ex". The 405EX and 405EXr are identical exept that the 2nd PCIe and the 2nd EMAC interfaces are missing. Signed-off-by: Stefan Roese Signed-off-by: Josh Boyer