kernel.git/arch/powerpc/boot/Makefile, branch linux-4.10.y

Merge tag 'powerpc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2016-12-16T17:26:42Z

Pull powerpc updates from Michael Ellerman: "Highlights include: - Support for the kexec_file_load() syscall, which is a prereq for secure and trusted boot. - Prevent kernel execution of userspace on P9 Radix (similar to SMEP/PXN). - Sort the exception tables at build time, to save time at boot, and store them as relative offsets to save space in the kernel image & memory. - Allow building the kernel with thin archives, which should allow us to build an allyesconfig once some other fixes land. - Build fixes to allow us to correctly rebuild when changing the kernel endian from big to little or vice versa. - Plumbing so that we can avoid doing a full mm TLB flush on P9 Radix. - Initial stack protector support (-fstack-protector). - Support for dumping the radix (aka. Linux) and hash page tables via debugfs. - Fix an oops in cxl coredump generation when cxl_get_fd() is used. - Freescale updates from Scott: "Highlights include 8xx hugepage support, qbman fixes/cleanup, device tree updates, and some misc cleanup." - Many and varied fixes and minor enhancements as always. Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anshuman Khandual, Anton Blanchard, Balbir Singh, Bartlomiej Zolnierkiewicz, Christophe Jaillet, Christophe Leroy, Denis Kirjanov, Elimar Riesebieter, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand, Jack Miller, Johan Hovold, Lars-Peter Clausen, Libin, Madhavan Srinivasan, Michael Neuling, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Pan Xinhui, Peter Senna Tschudin, Rashmica Gupta, Rui Teng, Russell Currey, Scott Wood, Simon Guo, Suraj Jitindar Singh, Thiago Jung Bauermann, Tobias Klauser, Vaibhav Jain" [ And thanks to Michael, who took time off from a new baby to get this pull request done. - Linus ] * tag 'powerpc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (174 commits) powerpc/fsl/dts: add FMan node for t1042d4rdb powerpc/fsl/dts: add sg_2500_aqr105_phy4 alias on t1024rdb powerpc/fsl/dts: add QMan and BMan nodes on t1024 powerpc/fsl/dts: add QMan and BMan nodes on t1023 soc/fsl/qman: test: use DEFINE_SPINLOCK() powerpc/fsl-lbc: use DEFINE_SPINLOCK() powerpc/8xx: Implement support of hugepages powerpc: get hugetlbpage handling more generic powerpc: port 64 bits pgtable_cache to 32 bits powerpc/boot: Request no dynamic linker for boot wrapper soc/fsl/bman: Use resource_size instead of computation soc/fsl/qe: use builtin_platform_driver powerpc/fsl_pmc: use builtin_platform_driver powerpc/83xx/suspend: use builtin_platform_driver powerpc/ftrace: Fix the comments for ftrace_modify_code powerpc/perf: macros for power9 format encoding powerpc/perf: power9 raw event format encoding powerpc/perf: update attribute_group data structure powerpc/perf: factor out the event format field powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown ...

powerpc/boot: Fix rebuild when changing kernel endian

2016-11-29T10:42:34Z

Now that we don't set ARCH incorrectly when calling the boot Makefile, we can use the generic cpp_lds_S rule for converting our zImage.lds.S into zImage.lds. The main advantage of using the generic rule is that it correctly uses if_changed, which means we correctly regenerate the linker script when switching endian. Fixing that means we are finally able to build one endian and then rebuild the other endian without requiring to clean between builds. Signed-off-by: Michael Ellerman

powerpc/boot: All uses of if_changed should depend on FORCE

2016-11-29T10:42:34Z

If we're using if_changed then we must depend on FORCE, so that if_changed gets a chance to check if something changed. Signed-off-by: Michael Ellerman

powerpc/boot: Fix build failure in 32-bit boot wrapper

2016-11-28T11:58:13Z

OPAL is not callable from 32-bit mode and the assembly code for it may not even build (depending on how binutils was configured). References: https://buildd.debian.org/status/fetch.php?pkg=linux&arch=powerpcspe&ver=4.8.7-1&stamp=1479203712 Fixes: 656ad58ef19e ("powerpc/boot: Add OPAL console to epapr wrappers") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Ben Hutchings Signed-off-by: Michael Ellerman

powerpc/boot: Add support for XZ compression

2016-09-28T04:35:14Z

This patch adds an option to use XZ compression for the kernel image. Currently this is only enabled for 64-bit Book3S targets, which is roughly equivalent to the platforms that use the kernel's zImage wrapper, and that have been tested. The bulk of the 32-bit platforms and 64-bit BookE use uboot images, which relies on uboot implementing XZ. In future we can enable XZ support for those targets once someone has tested it. Signed-off-by: Oliver O'Halloran Signed-off-by: Michael Ellerman

powerpc/boot: Add XZ support to the wrapper script

2016-09-28T04:32:27Z

This modifies the wrapper script so that the -Z option takes an argument to specify the compression type. It can either be 'gz', 'xz' or 'none'. The legazy --no-gzip and -z options are still supported and will set the compression to none and gzip respectively, but they are not documented. Only XZ -6 is used for compression rather than XZ -9. Using compression levels higher than 6 requires the decompressor to build a large (64MB) dictionary when decompressing and some environments cannot satisfy such large allocations (e.g. POWER 6 LPAR partition firmware). Signed-off-by: Oliver O'Halloran Signed-off-by: Michael Ellerman

powerpc/boot: Use the pre-boot decompression API

2016-09-28T04:31:43Z

Currently the powerpc boot wrapper has its own wrapper around zlib to handle decompressing gzipped kernels. The kernel decompressor library functions now provide a generic interface that can be used in the pre-boot environment. This allows boot wrappers to easily support different compression algorithms. This patch converts the wrapper to use this new API, but does not add support for using new algorithms. Signed-off-by: Oliver O'Halloran Signed-off-by: Michael Ellerman

powerpc/boot: Use CONFIG_KERNEL_GZIP

2016-09-28T04:25:55Z

Most architectures allow the compression algorithm used to produced the vmlinuz image to be selected as a kernel config option. In preperation for supporting algorithms other than gzip in the powerpc boot wrapper the makefile needs to be modified to use these config options. Signed-off-by: Oliver O'Halloran Signed-off-by: Michael Ellerman

powerpc/boot: Add sed script

2016-09-28T04:20:44Z

The powerpc boot wrapper is potentially compiled with a separate toolchain and/or toolchain flags than the rest of the kernel. The usual case is a 64-bit big endian kernel builds a 32-bit big endian wrapper. The main problem with this is that the wrapper does not have access to the kernel headers (without a lot of gross hacks). To get around this the required headers are copied into the build directory via several sed scripts which rewrite problematic includes. This patch moves these fixups out of the makefile into a separate .sed script file to clean up makefile slightly. Signed-off-by: Oliver O'Halloran [mpe: Reword first paragraph of change log a little] Signed-off-by: Michael Ellerman

powerpc/boot: Use $(Q) to quiet build rules not @

2016-09-13T07:37:05Z

Some of the rules in the boot Makefile use @ to hide the command, this means "make V=1" doesn't show them, which is confusing. So use the Kbuild standard $(Q) which means KBUILD_VERBOSE=1 or V=1 will work as expected. Signed-off-by: Michael Ellerman