kernel.git/arch/powerpc/Kconfig, branch linux-6.17.y

sched/fair: Get rid of sched_domains_curr_level hack for tl->cpumask()

2025-10-15T10:03:17Z

[ Upstream commit 661f951e371cc134ea31c84238dbdc9a898b8403 ] Leon [1] and Vinicius [2] noted a topology_span_sane() warning during their testing starting from v6.16-rc1. Debug that followed pointed to the tl->mask() for the NODE domain being incorrectly resolved to that of the highest NUMA domain. tl->mask() for NODE is set to the sd_numa_mask() which depends on the global "sched_domains_curr_level" hack. "sched_domains_curr_level" is set to the "tl->numa_level" during tl traversal in build_sched_domains() calling sd_init() but was not reset before topology_span_sane(). Since "tl->numa_level" still reflected the old value from build_sched_domains(), topology_span_sane() for the NODE domain trips when the span of the last NUMA domain overlaps. Instead of replicating the "sched_domains_curr_level" hack, get rid of it entirely and instead, pass the entire "sched_domain_topology_level" object to tl->cpumask() function to prevent such mishap in the future. sd_numa_mask() now directly references "tl->numa_level" instead of relying on the global "sched_domains_curr_level" hack to index into sched_domains_numa_masks[]. The original warning was reproducible on the following NUMA topology reported by Leon: $ sudo numactl -H available: 5 nodes (0-4) node 0 cpus: 0 1 node 0 size: 2927 MB node 0 free: 1603 MB node 1 cpus: 2 3 node 1 size: 3023 MB node 1 free: 3008 MB node 2 cpus: 4 5 node 2 size: 3023 MB node 2 free: 3007 MB node 3 cpus: 6 7 node 3 size: 3023 MB node 3 free: 3002 MB node 4 cpus: 8 9 node 4 size: 3022 MB node 4 free: 2718 MB node distances: node 0 1 2 3 4 0: 10 39 38 37 36 1: 39 10 38 37 36 2: 38 38 10 37 36 3: 37 37 37 10 36 4: 36 36 36 36 10 The above topology can be mimicked using the following QEMU cmd that was used to reproduce the warning and test the fix: sudo qemu-system-x86_64 -enable-kvm -cpu host \ -m 20G -smp cpus=10,sockets=10 -machine q35 \ -object memory-backend-ram,size=4G,id=m0 \ -object memory-backend-ram,size=4G,id=m1 \ -object memory-backend-ram,size=4G,id=m2 \ -object memory-backend-ram,size=4G,id=m3 \ -object memory-backend-ram,size=4G,id=m4 \ -numa node,cpus=0-1,memdev=m0,nodeid=0 \ -numa node,cpus=2-3,memdev=m1,nodeid=1 \ -numa node,cpus=4-5,memdev=m2,nodeid=2 \ -numa node,cpus=6-7,memdev=m3,nodeid=3 \ -numa node,cpus=8-9,memdev=m4,nodeid=4 \ -numa dist,src=0,dst=1,val=39 \ -numa dist,src=0,dst=2,val=38 \ -numa dist,src=0,dst=3,val=37 \ -numa dist,src=0,dst=4,val=36 \ -numa dist,src=1,dst=0,val=39 \ -numa dist,src=1,dst=2,val=38 \ -numa dist,src=1,dst=3,val=37 \ -numa dist,src=1,dst=4,val=36 \ -numa dist,src=2,dst=0,val=38 \ -numa dist,src=2,dst=1,val=38 \ -numa dist,src=2,dst=3,val=37 \ -numa dist,src=2,dst=4,val=36 \ -numa dist,src=3,dst=0,val=37 \ -numa dist,src=3,dst=1,val=37 \ -numa dist,src=3,dst=2,val=37 \ -numa dist,src=3,dst=4,val=36 \ -numa dist,src=4,dst=0,val=36 \ -numa dist,src=4,dst=1,val=36 \ -numa dist,src=4,dst=2,val=36 \ -numa dist,src=4,dst=3,val=36 \ ... [ prateek: Moved common functions to include/linux/sched/topology.h, reuse the common bits for s390 and ppc, commit message ] Closes: https://lore.kernel.org/lkml/20250610110701.GA256154@unreal/ [1] Fixes: ccf74128d66c ("sched/topology: Assert non-NUMA topology masks don't (partially) overlap") # ce29a7da84cd, f55dac1dafb3 Signed-off-by: Peter Zijlstra (Intel) Reported-by: Leon Romanovsky Signed-off-by: K Prateek Nayak Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Valentin Schneider Reviewed-by: Shrikanth Hegde Tested-by: Valentin Schneider # x86 Tested-by: Shrikanth Hegde # powerpc Link: https://lore.kernel.org/lkml/a3de98387abad28592e6ab591f3ff6107fe01dc1.1755893468.git.tim.c.chen@linux.intel.com/ [2] Signed-off-by: Sasha Levin

Merge tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2025-07-31T21:57:54Z

Pull MM updates from Andrew Morton: "As usual, many cleanups. The below blurbiage describes 42 patchsets. 21 of those are partially or fully cleanup work. "cleans up", "cleanup", "maintainability", "rationalizes", etc. I never knew the MM code was so dirty. "mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes) addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly mapped VMAs were not eligible for merging with existing adjacent VMAs. "mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park) adds a new kernel module which simplifies the setup and usage of DAMON in production environments. "stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig) is a cleanup to the writeback code which removes a couple of pointers from struct writeback_control. "drivers/base/node.c: optimization and cleanups" (Donet Tom) contains largely uncorrelated cleanups to the NUMA node setup and management code. "mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman) does some maintenance work on the userfaultfd code. "Readahead tweaks for larger folios" (Ryan Roberts) implements some tuneups for pagecache readahead when it is reading into order>0 folios. "selftests/mm: Tweaks to the cow test" (Mark Brown) provides some cleanups and consistency improvements to the selftests code. "Optimize mremap() for large folios" (Dev Jain) does that. A 37% reduction in execution time was measured in a memset+mremap+munmap microbenchmark. "Remove zero_user()" (Matthew Wilcox) expunges zero_user() in favor of the more modern memzero_page(). "mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand) addresses some warts which David noticed in the huge page code. These were not known to be causing any issues at this time. "mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park) provides some cleanup and consolidation work in DAMON. "use vm_flags_t consistently" (Lorenzo Stoakes) uses vm_flags_t in places where we were inappropriately using other types. "mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy) increases the reliability of large page allocation in the memfd code. "mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple) removes several now-unneeded PFN_* flags. "mm/damon: decouple sysfs from core" (SeongJae Park) implememnts some cleanup and maintainability work in the DAMON sysfs layer. "madvise cleanup" (Lorenzo Stoakes) does quite a lot of cleanup/maintenance work in the madvise() code. "madvise anon_name cleanups" (Vlastimil Babka) provides additional cleanups on top or Lorenzo's effort. "Implement numa node notifier" (Oscar Salvador) creates a standalone notifier for NUMA node memory state changes. Previously these were lumped under the more general memory on/offline notifier. "Make MIGRATE_ISOLATE a standalone bit" (Zi Yan) cleans up the pageblock isolation code and fixes a potential issue which doesn't seem to cause any problems in practice. "selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park) adds additional drgn- and python-based DAMON selftests which are more comprehensive than the existing selftest suite. "Misc rework on hugetlb faulting path" (Oscar Salvador) fixes a rather obscure deadlock in the hugetlb fault code and follows that fix with a series of cleanups. "cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport) rationalizes and cleans up the highmem-specific code in the CMA allocator. "mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand) provides cleanups and future-preparedness to the migration code. "mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park) adds some tracepoints to some DAMON auto-tuning code. "mm/damon: fix misc bugs in DAMON modules" (SeongJae Park) does that. "mm/damon: misc cleanups" (SeongJae Park) also does what it claims. "mm: folio_pte_batch() improvements" (David Hildenbrand) cleans up the large folio PTE batching code. "mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park) facilitates dynamic alteration of DAMON's inter-node allocation policy. "Remove unmap_and_put_page()" (Vishal Moola) provides a couple of page->folio conversions. "mm: per-node proactive reclaim" (Davidlohr Bueso) implements a per-node control of proactive reclaim - beyond the current memcg-based implementation. "mm/damon: remove damon_callback" (SeongJae Park) replaces the damon_callback interface with a more general and powerful damon_call()+damos_walk() interface. "mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes) implements a number of mremap cleanups (of course) in preparation for adding new mremap() functionality: newly permit the remapping of multiple VMAs when the user is specifying MREMAP_FIXED. It still excludes some specialized situations where this cannot be performed reliably. "drop hugetlb_free_pgd_range()" (Anthony Yznaga) switches some sparc hugetlb code over to the generic version and removes the thus-unneeded hugetlb_free_pgd_range(). "mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park) augments the present userspace-requested update of DAMON sysfs monitoring files. Automatic update is now provided, along with a tunable to control the update interval. "Some randome fixes and cleanups to swapfile" (Kemeng Shi) does what is claims. "mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand) provides (and uses) a means by which debug-style functions can grab a copy of a pageframe and inspect it locklessly without tripping over the races inherent in operating on the live pageframe directly. "use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan) addresses the large contention issues which can be triggered by reads from that procfs file. Latencies are reduced by more than half in some situations. The series also introduces several new selftests for the /proc/pid/maps interface. "__folio_split() clean up" (Zi Yan) cleans up __folio_split()! "Optimize mprotect() for large folios" (Dev Jain) provides some quite large (>3x) speedups to mprotect() when dealing with large folios. "selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian) does some cleanup work in the selftests code. "tools/testing: expand mremap testing" (Lorenzo Stoakes) extends the mremap() selftest in several ways, including adding more checking of Lorenzo's recently added "permit mremap() move of multiple VMAs" feature. "selftests/damon/sysfs.py: test all parameters" (SeongJae Park) extends the DAMON sysfs interface selftest so that it tests all possible user-requested parameters. Rather than the present minimal subset" * tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits) MAINTAINERS: add missing headers to mempory policy & migration section MAINTAINERS: add missing file to cgroup section MAINTAINERS: add MM MISC section, add missing files to MISC and CORE MAINTAINERS: add missing zsmalloc file MAINTAINERS: add missing files to page alloc section MAINTAINERS: add missing shrinker files MAINTAINERS: move memremap.[ch] to hotplug section MAINTAINERS: add missing mm_slot.h file THP section MAINTAINERS: add missing interval_tree.c to memory mapping section MAINTAINERS: add missing percpu-internal.h file to per-cpu section mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info() selftests/damon: introduce _common.sh to host shared function selftests/damon/sysfs.py: test runtime reduction of DAMON parameters selftests/damon/sysfs.py: test non-default parameters runtime commit selftests/damon/sysfs.py: generalize DAMON context commit assertion selftests/damon/sysfs.py: generalize monitoring attributes commit assertion selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion selftests/damon/sysfs.py: test DAMOS filters commitment selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion selftests/damon/sysfs.py: test DAMOS destinations commitment ...

Merge tag 'ftrace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

2025-07-30T23:04:10Z

Pull ftrace updates from Steven Rostedt: - Keep track of when fgraph_ops are registered or not Keep accounting of when fgraph_ops are registered as if a fgraph_ops is registered twice it can mess up the accounting and it will not work as expected later. Trigger a warning if something registers it twice as to catch bugs before they are found by things just not working as expected. - Make DYNAMIC_FTRACE always enabled for architectures that support it As static ftrace (where all functions are always traced) is very expensive and only exists to help architectures support ftrace, do not make it an option. As soon as an architecture supports DYNAMIC_FTRACE make it use it. This simplifies the code. - Remove redundant config HAVE_FTRACE_MCOUNT_RECORD The CONFIG_HAVE_FTRACE_MCOUNT was added to help simplify the DYNAMIC_FTRACE work, but now every architecture that implements DYNAMIC_FTRACE also has HAVE_FTRACE_MCOUNT set too, making it redundant with the HAVE_DYNAMIC_FTRACE. - Make pid_ptr string size match the comment In print_graph_proc() the pid_ptr string is of size 11, but the comment says /* sign + log10(MAX_INT) + '\0' */ which is actually 12. * tag 'ftrace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Remove redundant config HAVE_FTRACE_MCOUNT_RECORD ftrace: Make DYNAMIC_FTRACE always enabled for architectures that support it fgraph: Keep track of when fgraph_ops are registered or not fgraph: Make pid_str size match the comment

tracing: Remove redundant config HAVE_FTRACE_MCOUNT_RECORD

2025-07-23T00:15:56Z

Ftrace is tightly coupled with architecture specific code because it requires the use of trampolines written in assembly. This means that when a new feature or optimization is made, it must be done for all architectures. To simplify the approach, CONFIG_HAVE_FTRACE_* configs are added to denote which architecture has the new enhancement so that other architectures can still function until they too have been updated. The CONFIG_HAVE_FTRACE_MCOUNT was added to help simplify the DYNAMIC_FTRACE work, but now every architecture that implements DYNAMIC_FTRACE also has HAVE_FTRACE_MCOUNT set too, making it redundant with the HAVE_DYNAMIC_FTRACE. Remove the HAVE_FTRACE_MCOUNT config and use DYNAMIC_FTRACE directly where applicable. Link: https://lore.kernel.org/all/20250703154916.48e3ada7@gandalf.local.home/ Cc: Masami Hiramatsu Cc: Mathieu Desnoyers Cc: Mark Rutland Cc: Linus Torvalds Link: https://lore.kernel.org/20250704104838.27a18690@gandalf.local.home Signed-off-by: Steven Rostedt (Google)

mm: remove devmap related functions and page table bits

2025-07-10T05:42:18Z

Now that DAX and all other reference counts to ZONE_DEVICE pages are managed normally there is no need for the special devmap PTE/PMD/PUD page table bits. So drop all references to these, freeing up a software defined page table bit on architectures supporting it. Link: https://lkml.kernel.org/r/6389398c32cc9daa3dfcaa9f79c7972525d310ce.1750323463.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple Acked-by: Will Deacon # arm64 Acked-by: David Hildenbrand Suggested-by: Chunyan Zhang Reviewed-by: Björn Töpel Reviewed-by: Jason Gunthorpe Cc: Balbir Singh Cc: Björn Töpel Cc: Christoph Hellwig Cc: Dan Williams Cc: Deepak Gupta Cc: Gerald Schaefer Cc: Inki Dae Cc: John Groves Cc: John Hubbard Cc: Lorenzo Stoakes Cc: Matthew Wilcox (Oracle) Signed-off-by: Andrew Morton

lib/crc: powerpc: Migrate optimized CRC code into lib/crc/

2025-06-30T16:31:57Z

Move the powerpc-optimized CRC code from arch/powerpc/lib/crc* into its new location in lib/crc/powerpc/, and wire it up in the new way. This new way of organizing the CRC code eliminates the need to artificially split the code for each CRC variant into separate arch and generic modules, enabling better inlining and dead code elimination. For more details, see "lib/crc: Prepare for arch-optimized code in subdirs of lib/crc/". Reviewed-by: "Martin K. Petersen" Acked-by: Ingo Molnar Acked-by: "Jason A. Donenfeld" Link: https://lore.kernel.org/r/20250607200454.73587-8-ebiggers@kernel.org Signed-off-by: Eric Biggers

powerpc/8xx: Reduce alignment constraint for kernel memory

2025-05-12T04:48:11Z

8xx has three large page sizes: 8M, 512k and 16k. A too big alignment can lead to wasting memory. On a board which has only 32 MBytes of RAM, every single byte is worth it and a 512k alignment is sometimes too much. Allow mapping kernel memory with 16k pages and reduce the constraint on kernel memory alignment. 512k and 16k pages are handled the same way so reverse tests in order to make 8M pages the special case and other ones (512k and 16k) the alternative. Signed-off-by: Christophe Leroy Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/fa9927b70df13627cdf10b992ea71d6562c7760e.1746191262.git.christophe.leroy@csgroup.eu

powerpc: enable dynamic preemption

2025-04-16T17:00:22Z

Once the lazy preemption is supported, it would be desirable to change the preemption models at runtime. So add support for dynamic preemption using DYNAMIC_KEY. ::Tested lightly on Power10 LPAR Performance numbers indicate that, preempt=none(no dynamic) and preempt=none(dynamic) are close. cat /sys/kernel/debug/sched/preempt (none) voluntary full lazy perf stat -e probe:__cond_resched -a sleep 1 Performance counter stats for 'system wide': 1,253 probe:__cond_resched echo full > /sys/kernel/debug/sched/preempt cat /sys/kernel/debug/sched/preempt none voluntary (full) lazy perf stat -e probe:__cond_resched -a sleep 1 Performance counter stats for 'system wide': 0 probe:__cond_resched Signed-off-by: Shrikanth Hegde Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20250210184334.567383-2-sshegde@linux.ibm.com

Merge tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2025-04-01T17:06:52Z

Pull non-MM updates from Andrew Morton: - The series "powerpc/crash: use generic crashkernel reservation" from Sourabh Jain changes powerpc's kexec code to use more of the generic layers. - The series "get_maintainer: report subsystem status separately" from Vlastimil Babka makes some long-requested improvements to the get_maintainer output. - The series "ucount: Simplify refcounting with rcuref_t" from Sebastian Siewior cleans up and optimizing the refcounting in the ucount code. - The series "reboot: support runtime configuration of emergency hw_protection action" from Ahmad Fatoum improves the ability for a driver to perform an emergency system shutdown or reboot. - The series "Converge on using secs_to_jiffies() part two" from Easwar Hariharan performs further migrations from msecs_to_jiffies() to secs_to_jiffies(). - The series "lib/interval_tree: add some test cases and cleanup" from Wei Yang permits more userspace testing of kernel library code, adds some more tests and performs some cleanups. - The series "hung_task: Dump the blocking task stacktrace" from Masami Hiramatsu arranges for the hung_task detector to dump the stack of the blocking task and not just that of the blocked task. - The series "resource: Split and use DEFINE_RES*() macros" from Andy Shevchenko provides some cleanups to the resource definition macros. - Plus the usual shower of singleton patches - please see the individual changelogs for details. * tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits) mailmap: consolidate email addresses of Alexander Sverdlin fs/procfs: fix the comment above proc_pid_wchan() relay: use kasprintf() instead of fixed buffer formatting resource: replace open coded variant of DEFINE_RES() resource: replace open coded variants of DEFINE_RES_*_NAMED() resource: replace open coded variant of DEFINE_RES_NAMED_DESC() resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED() samples: add hung_task detector mutex blocking sample hung_task: show the blocker task if the task is hung on mutex kexec_core: accept unaccepted kexec segments' destination addresses watchdog/perf: optimize bytes copied and remove manual NUL-termination lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap() lib/interval_tree: skip the check before go to the right subtree lib/interval_tree: add test case for span iteration lib/interval_tree: add test case for interval_tree_iter_xxx() helpers lib/rbtree: add random seed lib/rbtree: split tests lib/rbtree: enable userland test suite for rbtree related data structure checkpatch: describe --min-conf-desc-length scripts/gdb/symbols: determine KASLR offset on s390 ...

Merge tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2025-04-01T16:29:18Z

Pull MM updates from Andrew Morton: - The series "Enable strict percpu address space checks" from Uros Bizjak uses x86 named address space qualifiers to provide compile-time checking of percpu area accesses. This has caused a small amount of fallout - two or three issues were reported. In all cases the calling code was found to be incorrect. - The series "Some cleanup for memcg" from Chen Ridong implements some relatively monir cleanups for the memcontrol code. - The series "mm: fixes for device-exclusive entries (hmm)" from David Hildenbrand fixes a boatload of issues which David found then using device-exclusive PTE entries when THP is enabled. More work is needed, but this makes thins better - our own HMM selftests now succeed. - The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed remove the z3fold and zbud implementations. They have been deprecated for half a year and nobody has complained. - The series "mm: further simplify VMA merge operation" from Lorenzo Stoakes implements numerous simplifications in this area. No runtime effects are anticipated. - The series "mm/madvise: remove redundant mmap_lock operations from process_madvise()" from SeongJae Park rationalizes the locking in the madvise() implementation. Performance gains of 20-25% were observed in one MADV_DONTNEED microbenchmark. - The series "Tiny cleanup and improvements about SWAP code" from Baoquan He contains a number of touchups to issues which Baoquan noticed when working on the swap code. - The series "mm: kmemleak: Usability improvements" from Catalin Marinas implements a couple of improvements to the kmemleak user-visible output. - The series "mm/damon/paddr: fix large folios access and schemes handling" from Usama Arif provides a couple of fixes for DAMON's handling of large folios. - The series "mm/damon/core: fix wrong and/or useless damos_walk() behaviors" from SeongJae Park fixes a few issues with the accuracy of kdamond's walking of DAMON regions. - The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo Stoakes changes the interaction between framebuffer deferred-io and core MM. No functional changes are anticipated - this is preparatory work for the future removal of page structure fields. - The series "mm/damon: add support for hugepage_size DAMOS filter" from Usama Arif adds a DAMOS filter which permits the filtering by huge page sizes. - The series "mm: permit guard regions for file-backed/shmem mappings" from Lorenzo Stoakes extends the guard region feature from its present "anon mappings only" state. The feature now covers shmem and file-backed mappings. - The series "mm: batched unmap lazyfree large folios during reclamation" from Barry Song cleans up and speeds up the unmapping for pte-mapped large folios. - The series "reimplement per-vma lock as a refcount" from Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for pulling it out were largely bogus and that change made the code more messy. This patchset provides small (0-10%) improvements on one microbenchmark. - The series "Docs/mm/damon: misc DAMOS filters documentation fixes and improves" from SeongJae Park does some maintenance work on the DAMON docs. - The series "hugetlb/CMA improvements for large systems" from Frank van der Linden addresses a pile of issues which have been observed when using CMA on large machines. - The series "mm/damon: introduce DAMOS filter type for unmapped pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the page's mapped/unmapped status. - The series "zsmalloc/zram: there be preemption" from Sergey Senozhatsky teaches zram to run its compression and decompression operations preemptibly. - The series "selftests/mm: Some cleanups from trying to run them" from Brendan Jackman fixes a pile of unrelated issues which Brendan encountered while runnimg our selftests. - The series "fs/proc/task_mmu: add guard region bit to pagemap" from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to determine whether a particular page is a guard page. - The series "mm, swap: remove swap slot cache" from Kairui Song removes the swap slot cache from the allocation path - it simply wasn't being effective. - The series "mm: cleanups for device-exclusive entries (hmm)" from David Hildenbrand implements a number of unrelated cleanups in this code. - The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual implements a number of preparatoty cleanups to the GENERIC_PTDUMP Kconfig logic. - The series "mm/damon: auto-tune aggregation interval" from SeongJae Park implements a feedback-driven automatic tuning feature for DAMON's aggregation interval tuning. - The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did this in preparation for implementing lazy mmu mode for arm64 to optimize vmalloc. - The series "mm/page_alloc: Some clarifications for migratetype fallback" from Brendan Jackman reworks some commentary to make the code easier to follow. - The series "page_counter cleanup and size reduction" from Shakeel Butt cleans up the page_counter code and fixes a size increase which we accidentally added late last year. - The series "Add a command line option that enables control of how many threads should be used to allocate huge pages" from Thomas Prescher does that. It allows the careful operator to significantly reduce boot time by tuning the parallalization of huge page initialization. - The series "Fix calculations in trace_balance_dirty_pages() for cgwb" from Tang Yizhou fixes the tracing output from the dirty page balancing code. - The series "mm/damon: make allow filters after reject filters useful and intuitive" from SeongJae Park improves the handling of allow and reject filters. Behaviour is made more consistent and the documention is updated accordingly. - The series "Switch zswap to object read/write APIs" from Yosry Ahmed updates zswap to the new object read/write APIs and thus permits the removal of some legacy code from zpool and zsmalloc. - The series "Some trivial cleanups for shmem" from Baolin Wang does as it claims. - The series "fs/dax: Fix ZONE_DEVICE page reference counts" from Alistair Popple regularizes the weird ZONE_DEVICE page refcount handling in DAX, permittig the removal of a number of special-case checks. - The series "refactor mremap and fix bug" from Lorenzo Stoakes is a preparatoty refactoring and cleanup of the mremap() code. - The series "mm: MM owner tracking for large folios (!hugetlb) + CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in which we determine whether a large folio is known to be mapped exclusively into a single MM. - The series "mm/damon: add sysfs dirs for managing DAMOS filters based on handling layers" from SeongJae Park adds a couple of new sysfs directories to ease the management of DAMON/DAMOS filters. - The series "arch, mm: reduce code duplication in mem_init()" from Mike Rapoport consolidates many per-arch implementations of mem_init() into code generic code, where that is practical. - The series "mm/damon/sysfs: commit parameters online via damon_call()" from SeongJae Park continues the cleaning up of sysfs access to DAMON internal data. - The series "mm: page_ext: Introduce new iteration API" from Luiz Capitulino reworks the page_ext initialization to fix a boot-time crash which was observed with an unusual combination of compile and cmdline options. - The series "Buddy allocator like (or non-uniform) folio split" from Zi Yan reworks the code to split a folio into smaller folios. The main benefit is lessened memory consumption: fewer post-split folios are generated. - The series "Minimize xa_node allocation during xarry split" from Zi Yan reduces the number of xarray xa_nodes which are generated during an xarray split. - The series "drivers/base/memory: Two cleanups" from Gavin Shan performs some maintenance work on the drivers/base/memory code. - The series "Add tracepoints for lowmem reserves, watermarks and totalreserve_pages" from Martin Liu adds some more tracepoints to the page allocator code. - The series "mm/madvise: cleanup requests validations and classifications" from SeongJae Park cleans up some warts which SeongJae observed during his earlier madvise work. - The series "mm/hwpoison: Fix regressions in memory failure handling" from Shuai Xue addresses two quite serious regressions which Shuai has observed in the memory-failure implementation. - The series "mm: reliable huge page allocator" from Johannes Weiner makes huge page allocations cheaper and more reliable by reducing fragmentation. - The series "Minor memcg cleanups & prep for memdescs" from Matthew Wilcox is preparatory work for the future implementation of memdescs. - The series "track memory used by balloon drivers" from Nico Pache introduces a way to track memory used by our various balloon drivers. - The series "mm/damon: introduce DAMOS filter type for active pages" from Nhat Pham permits users to filter for active/inactive pages, separately for file and anon pages. - The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia separates the proactive reclaim statistics from the direct reclaim statistics. - The series "mm/vmscan: don't try to reclaim hwpoison folio" from Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim code. * tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits) mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex() x86/mm: restore early initialization of high_memory for 32-bits mm/vmscan: don't try to reclaim hwpoison folio mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper cgroup: docs: add pswpin and pswpout items in cgroup v2 doc mm: vmscan: split proactive reclaim statistics from direct reclaim statistics selftests/mm: speed up split_huge_page_test selftests/mm: uffd-unit-tests support for hugepages > 2M docs/mm/damon/design: document active DAMOS filter type mm/damon: implement a new DAMOS filter type for active pages fs/dax: don't disassociate zero page entries MM documentation: add "Unaccepted" meminfo entry selftests/mm: add commentary about 9pfs bugs fork: use __vmalloc_node() for stack allocation docs/mm: Physical Memory: Populate the "Zones" section xen: balloon: update the NR_BALLOON_PAGES state hv_balloon: update the NR_BALLOON_PAGES state balloon_compaction: update the NR_BALLOON_PAGES state meminfo: add a per node counter for balloon drivers mm: remove references to folio in __memcg_kmem_uncharge_page() ...