kernel.git/arch/openrisc, branch linux-4.19.y

openrisc: Call setup_memory() earlier in the init sequence

2024-09-04T11:13:03Z

[ Upstream commit 7b432bf376c9c198a7ff48f1ed14a14c0ffbe1fe ] The unflatten_and_copy_device_tree() function contains a call to memblock_alloc(). This means that memblock is allocating memory before any of the reserved memory regions are set aside in the setup_memory() function which calls early_init_fdt_scan_reserved_mem(). Therefore, there is a possibility for memblock to allocate from any of the reserved memory regions. Hence, move the call to setup_memory() to be earlier in the init sequence so that the reserved memory regions are set aside before any allocations are done using memblock. Signed-off-by: Oreoluwa Babatunde Signed-off-by: Stafford Horne Signed-off-by: Sasha Levin

openrisc: Properly store r31 to pt_regs on unhandled exceptions

2023-05-17T09:13:19Z

[ Upstream commit 812489ac4dd91144a74ce65ecf232252a2e406fb ] In commit 91993c8c2ed5 ("openrisc: use shadow registers to save regs on exception") the unhandled exception path was changed to do an early store of r30 instead of r31. The entry code was not updated and r31 is not getting stored to pt_regs. This patch updates the entry handler to store r31 instead of r30. We also remove some misleading commented out store r30 and r31 instructrions. I noticed this while working on adding floating point exception handling, This issue probably would never impact anything since we kill the process or Oops right away on unhandled exceptions. Fixes: 91993c8c2ed5 ("openrisc: use shadow registers to save regs on exception") Signed-off-by: Stafford Horne Signed-off-by: Sasha Levin

exit: Add and use make_task_dead.

2023-02-06T06:49:45Z

commit 0e25498f8cd43c1b5aa327f373dd094e9a006da7 upstream. There are two big uses of do_exit. The first is it's design use to be the guts of the exit(2) system call. The second use is to terminate a task after something catastrophic has happened like a NULL pointer in kernel code. Add a function make_task_dead that is initialy exactly the same as do_exit to cover the cases where do_exit is called to handle catastrophic failure. In time this can probably be reduced to just a light wrapper around do_task_dead. For now keep it exactly the same so that there will be no behavioral differences introducing this new concept. Replace all of the uses of do_exit that use it for catastraphic task cleanup with make_task_dead to make it clear what the code is doing. As part of this rename rewind_stack_do_exit rewind_stack_and_make_dead. Signed-off-by: "Eric W. Biederman" Signed-off-by: Eric Biggers Signed-off-by: Greg Kroah-Hartman

openrisc: start CPU timer early in boot

2022-06-14T14:59:17Z

[ Upstream commit 516dd4aacd67a0f27da94f3fe63fe0f4dbab6e2b ] In order to measure the boot process, the timer should be switched on as early in boot as possible. As well, the commit defines the get_cycles macro, like the previous patches in this series, so that generic code is aware that it's implemented by the platform, as is done on other archs. Cc: Thomas Gleixner Cc: Arnd Bergmann Cc: Jonas Bonn Cc: Stefan Kristiansson Acked-by: Stafford Horne Reported-by: Guenter Roeck Signed-off-by: Jason A. Donenfeld Signed-off-by: Sasha Levin

openrisc: don't printk() unconditionally

2021-09-22T09:48:01Z

[ Upstream commit 946e1052cdcc7e585ee5d1e72528ca49fb295243 ] Don't call printk() when CONFIG_PRINTK is not set. Fixes the following build errors: or1k-linux-ld: arch/openrisc/kernel/entry.o: in function `_external_irq_handler': (.text+0x804): undefined reference to `printk' (.text+0x804): relocation truncated to fit: R_OR1K_INSN_REL_26 against undefined symbol `printk' Fixes: 9d02a4283e9c ("OpenRISC: Boot code") Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: Jonas Bonn Cc: Stefan Kristiansson Cc: Stafford Horne Cc: openrisc@lists.librecores.org Signed-off-by: Stafford Horne Signed-off-by: Sasha Levin

openrisc: Define memory barrier mb

2021-06-03T06:38:10Z

[ Upstream commit 8b549c18ae81dbc36fb11e4aa08b8378c599ca95 ] This came up in the discussion of the requirements of qspinlock on an architecture. OpenRISC uses qspinlock, but it was noticed that the memmory barrier was not defined. Peter defined it in the mail thread writing: As near as I can tell this should do. The arch spec only lists this one instruction and the text makes it sound like a completion barrier. This is correct so applying this patch. Signed-off-by: Peter Zijlstra [shorne@gmail.com:Turned the mail into a patch] Signed-off-by: Stafford Horne Signed-off-by: Sasha Levin

openrisc: Fix a memory leak

2021-05-26T09:48:31Z

[ Upstream commit c019d92457826bb7b2091c86f36adb5de08405f9 ] 'setup_find_cpu_node()' take a reference on the node it returns. This reference must be decremented when not needed anymore, or there will be a leak. Add the missing 'of_node_put(cpu)'. Note that 'setup_cpuinfo()' that also calls this function already has a correct 'of_node_put(cpu)' at its end. Fixes: 9d02a4283e9c ("OpenRISC: Boot code") Signed-off-by: Christophe JAILLET Signed-off-by: Stafford Horne Signed-off-by: Sasha Levin

openrisc: Fix cache API compile issue when not inlining

2020-09-23T10:10:58Z

[ Upstream commit 3ae90d764093dfcd6ab8ab6875377302892c87d4 ] I found this when compiling a kbuild random config with GCC 11. The config enables CONFIG_DEBUG_SECTION_MISMATCH, which sets CFLAGS -fno-inline-functions-called-once. This causes the call to cache_loop in cache.c to not be inlined causing the below compile error. In file included from arch/openrisc/mm/cache.c:13: arch/openrisc/mm/cache.c: In function 'cache_loop': ./arch/openrisc/include/asm/spr.h:16:27: warning: 'asm' operand 0 probably does not match constraints 16 | #define mtspr(_spr, _val) __asm__ __volatile__ ( \ | ^~~~~~~ arch/openrisc/mm/cache.c:25:3: note: in expansion of macro 'mtspr' 25 | mtspr(reg, line); | ^~~~~ ./arch/openrisc/include/asm/spr.h:16:27: error: impossible constraint in 'asm' 16 | #define mtspr(_spr, _val) __asm__ __volatile__ ( \ | ^~~~~~~ arch/openrisc/mm/cache.c:25:3: note: in expansion of macro 'mtspr' 25 | mtspr(reg, line); | ^~~~~ make[1]: *** [scripts/Makefile.build:283: arch/openrisc/mm/cache.o] Error 1 The asm constraint "K" requires a immediate constant argument to mtspr, however because of no inlining a register argument is passed causing a failure. Fix this by using __always_inline. Link: https://lore.kernel.org/lkml/202008200453.ohnhqkjQ%25lkp@intel.com/ Signed-off-by: Stafford Horne Signed-off-by: Sasha Levin

openrisc: Fix oops caused when dumping stack

2020-08-21T09:05:37Z

[ Upstream commit 57b8e277c33620e115633cdf700a260b55095460 ] When dumping a stack with 'cat /proc/#/stack' the kernel would oops. For example: # cat /proc/690/stack Unable to handle kernel access at virtual address 0x7fc60f58 Oops#: 0000 CPU #: 0 PC: c00097fc SR: 0000807f SP: d6f09b9c GPR00: 00000000 GPR01: d6f09b9c GPR02: d6f09bb8 GPR03: d6f09bc4 GPR04: 7fc60f5c GPR05: c00099b4 GPR06: 00000000 GPR07: d6f09ba3 GPR08: ffffff00 GPR09: c0009804 GPR10: d6f08000 GPR11: 00000000 GPR12: ffffe000 GPR13: dbb86000 GPR14: 00000001 GPR15: dbb86250 GPR16: 7fc60f63 GPR17: 00000f5c GPR18: d6f09bc4 GPR19: 00000000 GPR20: c00099b4 GPR21: ffffffc0 GPR22: 00000000 GPR23: 00000000 GPR24: 00000001 GPR25: 000002c6 GPR26: d78b6850 GPR27: 00000001 GPR28: 00000000 GPR29: dbb86000 GPR30: ffffffff GPR31: dbb862fc RES: 00000000 oGPR11: ffffffff Process cat (pid: 702, stackpage=d79d6000) Stack: Call trace: [<598977f2>] save_stack_trace_tsk+0x40/0x74 [<95063f0e>] stack_trace_save_tsk+0x44/0x58 [] proc_pid_stack+0xd0/0x13c [] proc_single_show+0x6c/0xf0 [] seq_read+0x1b4/0x688 [<2d6c7480>] do_iter_read+0x208/0x248 [<2182a2fb>] vfs_readv+0x64/0x90 This was caused by the stack trace code in save_stack_trace_tsk using the wrong stack pointer. It was using the user stack pointer instead of the kernel stack pointer. Fix this by using the right stack. Also for good measure we add try_get_task_stack/put_task_stack to ensure the task is not lost while we are walking it's stack. Fixes: eecac38b0423a ("openrisc: support framepointers and STACKTRACE_SUPPORT") Signed-off-by: Stafford Horne Signed-off-by: Sasha Levin

openrisc: Fix issue with argument clobbering for clone/fork

2020-06-25T13:33:01Z

[ Upstream commit 6bd140e14d9aaa734ec37985b8b20a96c0ece948 ] Working on the OpenRISC glibc port I found that sometimes clone was working strange. That the tls data argument sent in r7 was always wrong. Further investigation revealed that the arguments were getting clobbered in the entry code. This patch removes the code that writes to the argument registers. This was likely due to some old code hanging around. This patch fixes this up for clone and fork. This fork clobber is harmless but also useless so remove. Signed-off-by: Stafford Horne Signed-off-by: Sasha Levin