kernel.git/arch/openrisc/kernel, branch linux-4.14.y

exit: Add and use make_task_dead.

2023-02-06T06:46:33Z

commit 0e25498f8cd43c1b5aa327f373dd094e9a006da7 upstream. There are two big uses of do_exit. The first is it's design use to be the guts of the exit(2) system call. The second use is to terminate a task after something catastrophic has happened like a NULL pointer in kernel code. Add a function make_task_dead that is initialy exactly the same as do_exit to cover the cases where do_exit is called to handle catastrophic failure. In time this can probably be reduced to just a light wrapper around do_task_dead. For now keep it exactly the same so that there will be no behavioral differences introducing this new concept. Replace all of the uses of do_exit that use it for catastraphic task cleanup with make_task_dead to make it clear what the code is doing. As part of this rename rewind_stack_do_exit rewind_stack_and_make_dead. Signed-off-by: "Eric W. Biederman" Signed-off-by: Eric Biggers Signed-off-by: Greg Kroah-Hartman

openrisc: start CPU timer early in boot

2022-06-14T14:53:45Z

[ Upstream commit 516dd4aacd67a0f27da94f3fe63fe0f4dbab6e2b ] In order to measure the boot process, the timer should be switched on as early in boot as possible. As well, the commit defines the get_cycles macro, like the previous patches in this series, so that generic code is aware that it's implemented by the platform, as is done on other archs. Cc: Thomas Gleixner Cc: Arnd Bergmann Cc: Jonas Bonn Cc: Stefan Kristiansson Acked-by: Stafford Horne Reported-by: Guenter Roeck Signed-off-by: Jason A. Donenfeld Signed-off-by: Sasha Levin

openrisc: don't printk() unconditionally

2021-09-22T09:45:26Z

[ Upstream commit 946e1052cdcc7e585ee5d1e72528ca49fb295243 ] Don't call printk() when CONFIG_PRINTK is not set. Fixes the following build errors: or1k-linux-ld: arch/openrisc/kernel/entry.o: in function `_external_irq_handler': (.text+0x804): undefined reference to `printk' (.text+0x804): relocation truncated to fit: R_OR1K_INSN_REL_26 against undefined symbol `printk' Fixes: 9d02a4283e9c ("OpenRISC: Boot code") Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: Jonas Bonn Cc: Stefan Kristiansson Cc: Stafford Horne Cc: openrisc@lists.librecores.org Signed-off-by: Stafford Horne Signed-off-by: Sasha Levin

openrisc: Fix a memory leak

2021-05-26T09:46:58Z

[ Upstream commit c019d92457826bb7b2091c86f36adb5de08405f9 ] 'setup_find_cpu_node()' take a reference on the node it returns. This reference must be decremented when not needed anymore, or there will be a leak. Add the missing 'of_node_put(cpu)'. Note that 'setup_cpuinfo()' that also calls this function already has a correct 'of_node_put(cpu)' at its end. Fixes: 9d02a4283e9c ("OpenRISC: Boot code") Signed-off-by: Christophe JAILLET Signed-off-by: Stafford Horne Signed-off-by: Sasha Levin

openrisc: Fix issue with argument clobbering for clone/fork

2020-06-25T13:41:56Z

[ Upstream commit 6bd140e14d9aaa734ec37985b8b20a96c0ece948 ] Working on the OpenRISC glibc port I found that sometimes clone was working strange. That the tls data argument sent in r7 was always wrong. Further investigation revealed that the arguments were getting clobbered in the entry code. This patch removes the code that writes to the argument registers. This was likely due to some old code hanging around. This patch fixes this up for clone and fork. This fork clobber is harmless but also useless so remove. Signed-off-by: Stafford Horne Signed-off-by: Sasha Levin

openrisc: Fix broken paths to arch/or32

2019-12-05T14:37:38Z

[ Upstream commit 57ce8ba0fd3a95bf29ed741df1c52bd591bf43ff ] OpenRISC was mainlined as "openrisc", not "or32". vmlinux.lds is generated from vmlinux.lds.S. Signed-off-by: Geert Uytterhoeven Signed-off-by: Stafford Horne Signed-off-by: Sasha Levin

openrisc: entry: Fix delay slot exception detection

2018-08-24T11:09:11Z

[ Upstream commit ae15a41a641449f536578b0d9ec0e4ade130deb5 ] Originally in patch e6d20c55a4 ("openrisc: entry: Fix delay slot detection") I fixed delay slot detection, but only for QEMU. We missed that hardware delay slot detection using delay slot exception flag (DSX) was still broken. This was because QEMU set the DSX flag in both pre-exception supervision register (ESR) and supervision register (SR) register, but on real hardware the DSX flag is only set on the SR register during exceptions. Fix this by carrying the DSX flag into the SR register during exception. We also update the DSX flag read locations to read the value from the SR register not the pt_regs SR register which represents ESR. The ESR should never have the DSX flag set. In the process I updated/removed a few comments to match the current state. Including removing a comment saying that the DSX detection logic was inefficient and needed to be rewritten. I have tested this on QEMU with a patch ensuring it matches the hardware specification. Link: https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg00000.html Fixes: e6d20c55a4 ("openrisc: entry: Fix delay slot detection") Signed-off-by: Stafford Horne Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

signal/openrisc: Fix do_unaligned_access to send the proper signal

2018-02-16T19:23:06Z

commit 500d58300571b6602341b041f97c082a461ef994 upstream. While reviewing the signal sending on openrisc the do_unaligned_access function stood out because it is obviously wrong. A comment about an si_code set above when actually si_code is never set. Leading to a random si_code being sent to userspace in the event of an unaligned access. Looking further SIGBUS BUS_ADRALN is the proper pair of signal and si_code to send for an unaligned access. That is what other architectures do and what is required by posix. Given that do_unaligned_access is broken in a way that no one can be relying on it on openrisc fix the code to just do the right thing. Fixes: 769a8a96229e ("OpenRISC: Traps") Cc: Jonas Bonn Cc: Stefan Kristiansson Cc: Stafford Horne Cc: Arnd Bergmann Cc: openrisc@lists.librecores.org Acked-by: Stafford Horne Signed-off-by: "Eric W. Biederman" Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linux

2017-07-07T20:58:49Z

Pull OpenRISC updates from Stafford Horne: "Openrisc fixes for this 4.13 merge window, there is not really much here: - include cleanups, one with should reduce build time slightly - switch to new toolchain to new (>2 year old) toolchain prefix" * tag 'openrisc-for-linus' of git://github.com/openrisc/linux: openrisc: defconfig: Cleanup from old Kconfig options openrisc: explicitly include linux/bug.h in asm/fixmap.h openrisc: Switch to use export.h instead of module.h openrisc: Change toolchain from or32- to or1k-