kernel.git/arch/openrisc/include/asm, branch linux-4.14.y

openrisc: start CPU timer early in boot

2022-06-14T14:53:45Z

[ Upstream commit 516dd4aacd67a0f27da94f3fe63fe0f4dbab6e2b ] In order to measure the boot process, the timer should be switched on as early in boot as possible. As well, the commit defines the get_cycles macro, like the previous patches in this series, so that generic code is aware that it's implemented by the platform, as is done on other archs. Cc: Thomas Gleixner Cc: Arnd Bergmann Cc: Jonas Bonn Cc: Stefan Kristiansson Acked-by: Stafford Horne Reported-by: Guenter Roeck Signed-off-by: Jason A. Donenfeld Signed-off-by: Sasha Levin

openrisc: Define memory barrier mb

2021-06-03T06:36:22Z

[ Upstream commit 8b549c18ae81dbc36fb11e4aa08b8378c599ca95 ] This came up in the discussion of the requirements of qspinlock on an architecture. OpenRISC uses qspinlock, but it was noticed that the memmory barrier was not defined. Peter defined it in the mail thread writing: As near as I can tell this should do. The arch spec only lists this one instruction and the text makes it sound like a completion barrier. This is correct so applying this patch. Signed-off-by: Peter Zijlstra [shorne@gmail.com:Turned the mail into a patch] Signed-off-by: Stafford Horne Signed-off-by: Sasha Levin

arch/openrisc: Fix issues with access_ok()

2020-06-20T08:24:58Z

commit 9cb2feb4d21d97386eb25c7b67e2793efcc1e70a upstream. The commit 594cc251fdd0 ("make 'user_access_begin()' do 'access_ok()'") exposed incorrect implementations of access_ok() macro in several architectures. This change fixes 2 issues found in OpenRISC. OpenRISC was not properly using parenthesis for arguments and also using arguments twice. This patch fixes those 2 issues. I test booted this patch with v5.0-rc1 on qemu and it's working fine. Cc: Guenter Roeck Cc: Linus Torvalds Reported-by: Linus Torvalds Signed-off-by: Stafford Horne Signed-off-by: Linus Torvalds Signed-off-by: Miles Chen Signed-off-by: Greg Kroah-Hartman

kmemcheck: remove annotations

2018-02-22T14:42:23Z

commit 4950276672fce5c241857540f8561c440663673d upstream. Patch series "kmemcheck: kill kmemcheck", v2. As discussed at LSF/MM, kill kmemcheck. KASan is a replacement that is able to work without the limitation of kmemcheck (single CPU, slow). KASan is already upstream. We are also not aware of any users of kmemcheck (or users who don't consider KASan as a suitable replacement). The only objection was that since KASAN wasn't supported by all GCC versions provided by distros at that time we should hold off for 2 years, and try again. Now that 2 years have passed, and all distros provide gcc that supports KASAN, kill kmemcheck again for the very same reasons. This patch (of 4): Remove kmemcheck annotations, and calls to kmemcheck from the kernel. [alexander.levin@verizon.com: correctly remove kmemcheck call from dma_map_sg_attrs] Link: http://lkml.kernel.org/r/20171012192151.26531-1-alexander.levin@verizon.com Link: http://lkml.kernel.org/r/20171007030159.22241-2-alexander.levin@verizon.com Signed-off-by: Sasha Levin Cc: Alexander Potapenko Cc: Eric W. Biederman Cc: Michal Hocko Cc: Pekka Enberg Cc: Steven Rostedt Cc: Tim Hansen Cc: Vegard Nossum Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linux

2017-09-13T18:52:18Z

Pull OpenRISC fixlet from Stafford Horne: "Fix warning for upcoming work to remove linux/vmalloc.h from asm-generic/io.h" * tag 'openrisc-for-linus' of git://github.com/openrisc/linux: openrisc: add forward declaration for struct vm_area_struct

openrisc: add forward declaration for struct vm_area_struct

2017-09-10T22:22:05Z

After removing linux/vmalloc.h from asm-generic/io.h, the following warning occurs on openrisc: In file included from arch/openrisc/include/asm/io.h:33:0, from include/linux/io.h:25, from drivers/tty/serial/earlycon.c:19: arch/openrisc/include/asm/pgtable.h:424:2: warning: 'struct vm_area_struct' declared inside parameter list unsigned long address, pte_t *pte) ^ arch/openrisc/include/asm/pgtable.h:424:2: warning: its scope is only this definition or declaration, which is probably not what you want Reported-by: kbuild test robot Cc: Arnd Bergmann Signed-off-by: Tobias Klauser Signed-off-by: Stafford Horne

futex: Remove duplicated code and fix undefined behaviour

2017-08-25T20:49:59Z

There is code duplicated over all architecture's headers for futex_atomic_op_inuser. Namely op decoding, access_ok check for uaddr, and comparison of the result. Remove this duplication and leave up to the arches only the needed assembly which is now in arch_futex_atomic_op_inuser. This effectively distributes the Will Deacon's arm64 fix for undefined behaviour reported by UBSAN to all architectures. The fix was done in commit 5f16a046f8e1 (arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage). Look there for an example dump. And as suggested by Thomas, check for negative oparg too, because it was also reported to cause undefined behaviour report. Note that s390 removed access_ok check in d12a29703 ("s390/uaccess: remove pointless access_ok() checks") as access_ok there returns true. We introduce it back to the helper for the sake of simplicity (it gets optimized away anyway). Signed-off-by: Jiri Slaby Signed-off-by: Thomas Gleixner Acked-by: Russell King Acked-by: Michael Ellerman (powerpc) Acked-by: Heiko Carstens [s390] Acked-by: Chris Metcalf [for tile] Reviewed-by: Darren Hart (VMware) Reviewed-by: Will Deacon [core/arm64] Cc: linux-mips@linux-mips.org Cc: Rich Felker Cc: linux-ia64@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: peterz@infradead.org Cc: Benjamin Herrenschmidt Cc: Max Filippov Cc: Paul Mackerras Cc: sparclinux@vger.kernel.org Cc: Jonas Bonn Cc: linux-s390@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: Yoshinori Sato Cc: linux-hexagon@vger.kernel.org Cc: Helge Deller Cc: "James E.J. Bottomley" Cc: Catalin Marinas Cc: Matt Turner Cc: linux-snps-arc@lists.infradead.org Cc: Fenghua Yu Cc: Arnd Bergmann Cc: linux-xtensa@linux-xtensa.org Cc: Stefan Kristiansson Cc: openrisc@lists.librecores.org Cc: Ivan Kokshaysky Cc: Stafford Horne Cc: linux-arm-kernel@lists.infradead.org Cc: Richard Henderson Cc: Chris Zankel Cc: Michal Simek Cc: Tony Luck Cc: linux-parisc@vger.kernel.org Cc: Vineet Gupta Cc: Ralf Baechle Cc: Richard Kuo Cc: linux-alpha@vger.kernel.org Cc: Martin Schwidefsky Cc: linuxppc-dev@lists.ozlabs.org Cc: "David S. Miller" Link: http://lkml.kernel.org/r/20170824073105.3901-1-jslaby@suse.cz

openrisc: move generic-y of exported headers to uapi/asm/Kbuild

2017-07-11T12:33:50Z

Since commit fcc8487d477a ("uapi: export all headers under uapi directories"), all (and only) headers under uapi directories are exported, but asm-generic wrappers are still exceptions. To complete de-coupling the uapi from kernel headers, move generic-y of exported headers to uapi/asm/Kbuild. With this change, "make headers_install" will just need to parse uapi/asm/Kbuild to build up exported headers. Also, move "generic-y += kprobes.h" up in order to keep the entries sorted. Signed-off-by: Masahiro Yamada Acked-by: Stafford Horne

Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linux

2017-07-07T20:58:49Z

Pull OpenRISC updates from Stafford Horne: "Openrisc fixes for this 4.13 merge window, there is not really much here: - include cleanups, one with should reduce build time slightly - switch to new toolchain to new (>2 year old) toolchain prefix" * tag 'openrisc-for-linus' of git://github.com/openrisc/linux: openrisc: defconfig: Cleanup from old Kconfig options openrisc: explicitly include linux/bug.h in asm/fixmap.h openrisc: Switch to use export.h instead of module.h openrisc: Change toolchain from or32- to or1k-