kernel.git/arch/openrisc/include/asm/Kbuild, branch linux-4.18.y

time: Add an asm-generic/compat.h file

2018-04-19T11:28:51Z

We have a couple of files that try to include asm/compat.h on architectures where this is available. Those should generally use the higher-level linux/compat.h file, but that in turn fails to include asm/compat.h when CONFIG_COMPAT is disabled, unless we can provide that header on all architectures. This adds the asm/compat.h for all remaining architectures to simplify the dependencies. Architectures that are getting removed in linux-4.17 are not changed here, to avoid needless conflicts with the removal patches. Those architectures are broken by this patch, but we have already shown that they have no users. Signed-off-by: Arnd Bergmann

arch: Remove clkdev.h asm-generic from Kbuild

2018-01-03T17:02:11Z

Now that every architecture is using the generic clkdev.h file and we no longer include asm/clkdev.h anywhere in the tree, we can remove it. Cc: Russell King Acked-by: Arnd Bergmann Cc: Acked-by: Geert Uytterhoeven [m68k] Signed-off-by: Stephen Boyd

openrisc: add cacheflush support to fix icache aliasing

2017-11-03T05:01:15Z

On OpenRISC the icache does not snoop data stores. This can cause aliasing as reported by Jan. This patch fixes the issue to ensure icache is properly synchronized when code is written to memory. It supports both SMP and UP flushing. This supports dcache flush as well for architectures that do not support write-through caches; most OpenRISC implementations do implement write-through cache however. Dcache flushes are done only on a single core as OpenRISC dcaches all support snooping of bus stores. Signed-off-by: Jan Henrik Weinstock [shorne@gmail.com: Squashed patches and wrote commit message] Signed-off-by: Stafford Horne

openrisc: use qspinlocks and qrwlocks

2017-11-03T05:01:12Z

Enable OpenRISC to use qspinlocks and qrwlocks for upcoming SMP support. Signed-off-by: Stafford Horne

openrisc: move generic-y of exported headers to uapi/asm/Kbuild

2017-07-11T12:33:50Z

Since commit fcc8487d477a ("uapi: export all headers under uapi directories"), all (and only) headers under uapi directories are exported, but asm-generic wrappers are still exceptions. To complete de-coupling the uapi from kernel headers, move generic-y of exported headers to uapi/asm/Kbuild. With this change, "make headers_install" will just need to parse uapi/asm/Kbuild to build up exported headers. Also, move "generic-y += kprobes.h" up in order to keep the entries sorted. Signed-off-by: Masahiro Yamada Acked-by: Stafford Horne

signal: Remove non-uapi

2017-06-04T13:11:47Z

By moving the kernel side __SI_* defintions right next to the userspace ones we can kill the non-uapi versions of include include/asm-generic/siginfo.h and untangle the unholy mess of includes. [ tglx: Removed uapi/asm/siginfo.h from m32r, microblaze, mn10300 and score ] Signed-off-by: Christoph Hellwig Signed-off-by: Thomas Gleixner Cc: linux-arch@vger.kernel.org Cc: Fenghua Yu Cc: Tony Luck Cc: linux-ia64@vger.kernel.org Cc: Arnd Bergmann Cc: sparclinux@vger.kernel.org Cc: "David S. Miller" Link: http://lkml.kernel.org/r/20170603190102.28866-6-hch@lst.de

uapi: export all headers under uapi directories

2017-05-10T15:21:54Z

Regularly, when a new header is created in include/uapi/, the developer forgets to add it in the corresponding Kbuild file. This error is usually detected after the release is out. In fact, all headers under uapi directories should be exported, thus it's useless to have an exhaustive list. After this patch, the following files, which were not exported, are now exported (with make headers_install_all): asm-arc/kvm_para.h asm-arc/ucontext.h asm-blackfin/shmparam.h asm-blackfin/ucontext.h asm-c6x/shmparam.h asm-c6x/ucontext.h asm-cris/kvm_para.h asm-h8300/shmparam.h asm-h8300/ucontext.h asm-hexagon/shmparam.h asm-m32r/kvm_para.h asm-m68k/kvm_para.h asm-m68k/shmparam.h asm-metag/kvm_para.h asm-metag/shmparam.h asm-metag/ucontext.h asm-mips/hwcap.h asm-mips/reg.h asm-mips/ucontext.h asm-nios2/kvm_para.h asm-nios2/ucontext.h asm-openrisc/shmparam.h asm-parisc/kvm_para.h asm-powerpc/perf_regs.h asm-sh/kvm_para.h asm-sh/ucontext.h asm-tile/shmparam.h asm-unicore32/shmparam.h asm-unicore32/ucontext.h asm-x86/hwcap2.h asm-xtensa/kvm_para.h drm/armada_drm.h drm/etnaviv_drm.h drm/vgem_drm.h linux/aspeed-lpc-ctrl.h linux/auto_dev-ioctl.h linux/bcache.h linux/btrfs_tree.h linux/can/vxcan.h linux/cifs/cifs_mount.h linux/coresight-stm.h linux/cryptouser.h linux/fsmap.h linux/genwqe/genwqe_card.h linux/hash_info.h linux/kcm.h linux/kcov.h linux/kfd_ioctl.h linux/lightnvm.h linux/module.h linux/nbd-netlink.h linux/nilfs2_api.h linux/nilfs2_ondisk.h linux/nsfs.h linux/pr.h linux/qrtr.h linux/rpmsg.h linux/sched/types.h linux/sed-opal.h linux/smc.h linux/smc_diag.h linux/stm.h linux/switchtec_ioctl.h linux/vfio_ccw.h linux/wil6210_uapi.h rdma/bnxt_re-abi.h Note that I have removed from this list the files which are generated in every exported directories (like .install or .install.cmd). Thanks to Julien Floret for the tip to get all subdirs with a pure makefile command. For the record, note that exported files for asm directories are a mix of files listed by: - include/uapi/asm-generic/Kbuild.asm; - arch//include/uapi/asm/Kbuild; - arch//include/asm/Kbuild. Signed-off-by: Nicolas Dichtel Acked-by: Daniel Vetter Acked-by: Russell King Acked-by: Mark Salter Acked-by: Michael Ellerman (powerpc) Signed-off-by: Masahiro Yamada

openrisc: switch to generic extable.h

2017-03-28T22:23:51Z

Signed-off-by: Al Viro

kprobes: move kprobe declarations to asm-generic/kprobes.h

2017-02-28T02:43:45Z

Often all is needed is these small helpers, instead of compiler.h or a full kprobes.h. This is important for asm helpers, in fact even some asm/kprobes.h make use of these helpers... instead just keep a generic asm file with helpers useful for asm code with the least amount of clutter as possible. Likewise we need now to also address what to do about this file for both when architectures have CONFIG_HAVE_KPROBES, and when they do not. Then for when architectures have CONFIG_HAVE_KPROBES but have disabled CONFIG_KPROBES. Right now most asm/kprobes.h do not have guards against CONFIG_KPROBES, this means most architecture code cannot include asm/kprobes.h safely. Correct this and add guards for architectures missing them. Additionally provide architectures that not have kprobes support with the default asm-generic solution. This lets us force asm/kprobes.h on the header include/linux/kprobes.h always, but most importantly we can now safely include just asm/kprobes.h on architecture code without bringing the full kitchen sink of header files. Two architectures already provided a guard against CONFIG_KPROBES on its kprobes.h: sh, arch. The rest of the architectures needed gaurds added. We avoid including any not-needed headers on asm/kprobes.h unless kprobes have been enabled. In a subsequent atomic change we can try now to remove compiler.h from include/linux/kprobes.h. During this sweep I've also identified a few architectures defining a common macro needed for both kprobes and ftrace, that of the definition of the breakput instruction up. Some refer to this as BREAKPOINT_INSTRUCTION. This must be kept outside of the #ifdef CONFIG_KPROBES guard. [mcgrof@kernel.org: fix arm64 build] Link: http://lkml.kernel.org/r/CAB=NE6X1WMByuARS4mZ1g9+W=LuVBnMDnh_5zyN0CLADaVh=Jw@mail.gmail.com [sfr@canb.auug.org.au: fixup for kprobes declarations moving] Link: http://lkml.kernel.org/r/20170214165933.13ebd4f4@canb.auug.org.au Link: http://lkml.kernel.org/r/20170203233139.32682-1-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez Signed-off-by: Stephen Rothwell Acked-by: Masami Hiramatsu Cc: Arnd Bergmann Cc: Masami Hiramatsu Cc: Ananth N Mavinakayanahalli Cc: Anil S Keshavamurthy Cc: David S. Miller Cc: Ingo Molnar Cc: Thomas Gleixner Cc: H. Peter Anvin Cc: Andy Lutomirski Cc: Steven Rostedt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linux

2017-02-25T02:37:03Z

Pull OpenRISC updates from Stafford Horne: "Highlights include: - optimized memset and memcpy routines, ~20% boot time saving - support for cpu idling - adding support for l.swa and l.lwa atomic operations (in spec from 2014) - use atomics to implement: bitops, cmpxchg, futex - the atomics are in preparation for SMP support" * tag 'openrisc-for-linus' of git://github.com/openrisc/linux: (25 commits) openrisc: head: Init r0 to 0 on start openrisc: Export ioremap symbols used by modules arch/openrisc/lib/memcpy.c: use correct OR1200 option openrisc: head: Remove unused strings openrisc: head: Move init strings to rodata section openrisc: entry: Fix delay slot detection openrisc: entry: Whitespace and comment cleanups scripts/checkstack.pl: Add openrisc support MAINTAINERS: Add the openrisc official repository openrisc: Add .gitignore openrisc: Add optimized memcpy routine openrisc: Add optimized memset openrisc: Initial support for the idle state openrisc: Fix the bitmask for the unit present register openrisc: remove unnecessary stddef.h include openrisc: add futex_atomic_* implementations openrisc: add optimized atomic operations openrisc: add cmpxchg and xchg implementations openrisc: add atomic bitops openrisc: add l.lwa/l.swa emulation ...