kernel.git/arch/mips/vdso, branch linux-4.14.y

MIPS: vdso: Invalid GIC access through VDSO

2021-07-20T14:17:55Z

[ Upstream commit 47ce8527fbba145a7723685bc9a27d9855e06491 ] Accessing raw timers (currently only CLOCK_MONOTONIC_RAW) through VDSO doesn't return the correct time when using the GIC as clock source. The address of the GIC mapped page is in this case not calculated correctly. The GIC mapped page is calculated from the VDSO data by subtracting PAGE_SIZE: void *get_gic(const struct vdso_data *data) { return (void __iomem *)data - PAGE_SIZE; } However, the data pointer is not page aligned for raw clock sources. This is because the VDSO data for raw clock sources (CS_RAW = 1) is stored after the VDSO data for coarse clock sources (CS_HRES_COARSE = 0). Therefore, only the VDSO data for CS_HRES_COARSE is page aligned: +--------------------+ | | | vd[CS_RAW] | ---+ | vd[CS_HRES_COARSE] | | +--------------------+ | -PAGE_SIZE | | | | GIC mapped page | <--+ | | +--------------------+ When __arch_get_hw_counter() is called with &vd[CS_RAW], get_gic returns the wrong address (somewhere inside the GIC mapped page). The GIC counter values are not returned which results in an invalid time. Fixes: a7f4df4e21dd ("MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime()") Signed-off-by: Martin Fäcknitz Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin

mips: Do not include hi and lo in clobber list for R6

2021-05-22T08:57:13Z

commit 1d7ba0165d8206ac073f7ac3b14fc0836b66eae7 upstream >From [1] "GCC 10 (PR 91233) won't silently allow registers that are not architecturally available to be present in the clobber list anymore, resulting in build failure for mips*r6 targets in form of: ... .../sysdep.h:146:2: error: the register ‘lo’ cannot be clobbered in ‘asm’ for the current target 146 | __asm__ volatile ( \ | ^~~~~~~ This is because base R6 ISA doesn't define hi and lo registers w/o DSP extension. This patch provides the alternative clobber list for r6 targets that won't include those registers." Since kernel 5.4 and mips support for generic vDSO [2], the kernel fail to build for mips r6 cpus with gcc 10 for the same reason as glibc. [1] https://sourceware.org/git/?p=glibc.git;a=commit;h=020b2a97bb15f807c0482f0faee2184ed05bcad8 [2] '24640f233b46 ("mips: Add support for generic vDSO")' Signed-off-by: Romain Naour Signed-off-by: Sudip Mukherjee Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

mips/vdso: Fix resource leaks in genvdso.c

2020-09-03T09:22:26Z

[ Upstream commit a859647b4e6bfeb192284d27d24b6a0c914cae1d ] Close "fd" before the return of map_vdso() and close "out_file" in main(). Signed-off-by: Peng Fan Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin

MIPS: Disable Loongson MMI instructions for kernel build

2019-10-17T20:43:51Z

commit 2f2b4fd674cadd8c6b40eb629e140a14db4068fd upstream. GCC 9.x automatically enables support for Loongson MMI instructions when using some -march= flags, and then errors out when -msoft-float is specified with: cc1: error: ‘-mloongson-mmi’ must be used with ‘-mhard-float’ The kernel shouldn't be using these MMI instructions anyway, just as it doesn't use floating point instructions. Explicitly disable them in order to fix the build with GCC 9.x. Signed-off-by: Paul Burton Fixes: 3702bba5eb4f ("MIPS: Loongson: Add GCC 4.4 support for Loongson2E") Fixes: 6f7a251a259e ("MIPS: Loongson: Add basic Loongson 2F support") Fixes: 5188129b8c9f ("MIPS: Loongson-3: Improve -march option and move it to Platform") Cc: Huacai Chen Cc: Jiaxun Yang Cc: stable@vger.kernel.org # v2.6.32+ Cc: linux-mips@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

MIPS: VDSO: Use same -m%-float cflag as the kernel proper

2019-09-19T07:08:05Z

commit 0648e50e548d881d025b9419a1a168753c8e2bf7 upstream. The MIPS VDSO build currently doesn't provide the -msoft-float flag to the compiler as the kernel proper does. This results in an attempt to use the compiler's default floating point configuration, which can be problematic in cases where this is incompatible with the target CPU's -march= flag. For example decstation_defconfig fails to build using toolchains in which gcc was configured --with-fp-32=xx with the following error: LDS arch/mips/vdso/vdso.lds cc1: error: '-march=r3000' requires '-mfp32' make[2]: *** [scripts/Makefile.build:379: arch/mips/vdso/vdso.lds] Error 1 The kernel proper avoids this error because we build with the -msoft-float compiler flag, rather than using the compiler's default. Pass this flag through to the VDSO build so that it too becomes agnostic to the toolchain's floating point configuration. Note that this is filtered out from KBUILD_CFLAGS rather than simply always using -msoft-float such that if we switch the kernel to use -mno-float in the future the VDSO will automatically inherit the change. The VDSO doesn't actually include any floating point code, and its .MIPS.abiflags section is already manually generated to specify that it's compatible with any floating point ABI. As such this change should have no effect on the resulting VDSO, apart from fixing the build failure for affected toolchains. Signed-off-by: Paul Burton Reported-by: Kevin Hilman Reported-by: Guenter Roeck Tested-by: Kevin Hilman References: https://lore.kernel.org/linux-mips/1477843551-21813-1-git-send-email-linux@roeck-us.net/ References: https://kernelci.org/build/id/5c4e4ae059b5142a249ad004/logs/ Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Cc: Maciej W. Rozycki Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v4.4+ Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

MIPS: VDSO: Prevent use of smp_processor_id()

2019-09-19T07:08:05Z

commit 351fdddd366245c0fb4636f32edfb4198c8d6b8c upstream. VDSO code should not be using smp_processor_id(), since it is executed in user mode. Introduce a VDSO-specific path which will cause a compile-time or link-time error (depending upon support for __compiletime_error) if the VDSO ever incorrectly attempts to use smp_processor_id(). [Matt Redfearn : Move before change to smp_processor_id in series] Signed-off-by: Paul Burton Signed-off-by: Matt Redfearn Patchwork: https://patchwork.linux-mips.org/patch/17932/ Cc: Ralf Baechle Cc: James Hogan Cc: linux-mips@linux-mips.org Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

MIPS: VDSO: Include $(ccflags-vdso) in o32,n32 .lds builds

2019-02-15T07:09:12Z

commit 67fc5dc8a541e8f458d7f08bf88ff55933bf9f9d upstream. When generating vdso-o32.lds & vdso-n32.lds for use with programs running as compat ABIs under 64b kernels, we previously haven't included the compiler flags that are supposedly common to all ABIs - ie. those in the ccflags-vdso variable. This is problematic in cases where we need to provide the -m%-float flag in order to ensure that we don't attempt to use a floating point ABI that's incompatible with the target CPU & ABI. For example a toolchain using current gcc trunk configured --with-fp-32=xx fails to build a 64r6el_defconfig kernel with the following error: cc1: error: '-march=mips1' requires '-mfp32' make[2]: *** [arch/mips/vdso/Makefile:135: arch/mips/vdso/vdso-o32.lds] Error 1 Include $(ccflags-vdso) for the compat VDSO .lds builds, just as it is included for the native VDSO .lds & when compiling objects for the compat VDSOs. This ensures we consistently provide the -msoft-float flag amongst others, avoiding the problem by ensuring we're agnostic to the toolchain defaults. Signed-off-by: Paul Burton Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Cc: linux-mips@vger.kernel.org Cc: Kevin Hilman Cc: Guenter Roeck Cc: Maciej W . Rozycki Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

MIPS: Add DWARF unwinding to assembly

2017-09-06T09:01:52Z

This will allow kdump dumps to work correclty with MIPS and future DWARF unwinding of the stack to give accurate tracebacks. Signed-off-by: Corey Minyard Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16990/ Signed-off-by: Ralf Baechle

MIPS: VDSO: Avoid use of linux/irqchip/mips-gic.h

2017-09-04T11:53:14Z

Our VDSO code makes use of macros from linux/irqchip/mips-gic.h to provide offsets to register values, but these are trivial offsets to the two 32 bit halves of a 64 bit value. Replace use of the macros with zero (ie. omit adding an offset) and the size of the low 32 bit of the value. This removes our need for linux/irqchip/mips-gic.h & prepares us for it to be removed. Signed-off-by: Paul Burton Acked-by: Marc Zyngier Cc: Jason Cooper Cc: Thomas Gleixner Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17047/ Signed-off-by: Ralf Baechle