kernel.git/arch/mips/pci, branch linux-4.14.y

MIPS: pci-legacy: stop using of_pci_range_to_resource

2021-05-22T08:57:33Z

[ Upstream commit 3ecb9dc1581eebecaee56decac70e35365260866 ] Mirror commit aeba3731b150 ("powerpc/pci: Fix IO space breakage after of_pci_range_to_resource() change"). Most MIPS platforms do not define PCI_IOBASE, nor implement pci_address_to_pio(). Moreover, IO_SPACE_LIMIT is 0xffff for most MIPS platforms. of_pci_range_to_resource passes the _start address_ of the IO range into pci_address_to_pio, which then checks it against IO_SPACE_LIMIT and fails, because for MIPS platforms that use pci-legacy (pci-lantiq, pci-rt3883, pci-mt7620), IO ranges start much higher than 0xffff. In fact, pci-mt7621 in staging already works around this problem, see commit 09dd629eeabb ("staging: mt7621-pci: fix io space and properly set resource limits") So just stop using of_pci_range_to_resource, which does not work for MIPS. Fixes PCI errors like: pci_bus 0000:00: root bus resource [io 0xffffffff] Fixes: 0b0b0893d49b ("of/pci: Fix the conversion of IO ranges into IO resources") Signed-off-by: Ilya Lipnitskiy Cc: Liviu Dudau Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin

MIPS: pci-rt2880: fix slot 0 configuration

2021-05-22T08:57:24Z

commit 8e98b697006d749d745d3b174168a877bb96c500 upstream. pci_fixup_irqs() used to call pcibios_map_irq on every PCI device, which for RT2880 included bus 0 slot 0. After pci_fixup_irqs() got removed, only slots/funcs with devices attached would be called. While arguably the right thing, that left no chance for this driver to ever initialize slot 0, effectively bricking PCI and USB on RT2880 devices such as the Belkin F5D8235-4 v1. Slot 0 configuration needs to happen after PCI bus enumeration, but before any device at slot 0x11 (func 0 or 1) is talked to. That was determined empirically by testing on a Belkin F5D8235-4 v1 device. A minimal BAR 0 config write followed by read, then setting slot 0 PCI_COMMAND to MASTER | IO | MEMORY is all that seems to be required for proper functionality. Tested by ensuring that full- and high-speed USB devices get enumerated on the Belkin F5D8235-4 v1 (with an out of tree DTS file from OpenWrt). Fixes: 04c81c7293df ("MIPS: PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks") Signed-off-by: Ilya Lipnitskiy Cc: Lorenzo Pieralisi Cc: Tobias Wolf Cc: # v4.14+ Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman

MIPS: OCTEON: don't set octeon_dma_bar_type if PCI is disabled

2019-02-15T07:09:12Z

commit dcf300a69ac307053dfb35c2e33972e754a98bce upstream. Don't set octeon_dma_bar_type if PCI is disabled. This avoids creation of the MSI irqchip later on, and saves a bit of memory. Signed-off-by: Aaro Koskinen Signed-off-by: Paul Burton Fixes: a214720cbf50 ("Disable MSI also when pcie-octeon.pcie_disable on") Cc: stable@vger.kernel.org # v3.3+ Cc: linux-mips@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

Disable MSI also when pcie-octeon.pcie_disable on

2019-01-23T07:09:49Z

commit a214720cbf50cd8c3f76bbb9c3f5c283910e9d33 upstream. Octeon has an boot-time option to disable pcie. Since MSI depends on PCI-E, we should also disable MSI also with this option is on in order to avoid inadvertently accessing PCIe registers. Signed-off-by: YunQiang Su Signed-off-by: Paul Burton Cc: pburton@wavecomp.com Cc: linux-mips@vger.kernel.org Cc: aaro.koskinen@iki.fi Cc: stable@vger.kernel.org # v3.3+ Signed-off-by: Greg Kroah-Hartman

MIPS/PCI: Call pcie_bus_configure_settings() to set MPS/MRRS

2018-11-21T08:24:04Z

[ Upstream commit 2794f688b2c336e0da85e9f91fed33febbd9f54a ] Call pcie_bus_configure_settings() on MIPS, like for other platforms. The function pcie_bus_configure_settings() makes sure the MPS (Max Payload Size) across the bus is uniform and provides the ability to tune the MRSS (Max Read Request Size) and MPS (Max Payload Size) to higher performance values. Some devices will not operate properly if these aren't set correctly because the firmware doesn't always do it. Signed-off-by: Huacai Chen Signed-off-by: Paul Burton Patchwork: https://patchwork.linux-mips.org/patch/20649/ Cc: Ralf Baechle Cc: James Hogan Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang Cc: Zhangjin Wu Cc: Huacai Chen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

MIPS: Fix off-by-one in pci_resource_to_user()

2018-07-28T05:55:41Z

commit 38c0a74fe06da3be133cae3fb7bde6a9438e698b upstream. The MIPS implementation of pci_resource_to_user() introduced in v3.12 by commit 4c2924b725fb ("MIPS: PCI: Use pci_resource_to_user to map pci memory space properly") incorrectly sets *end to the address of the byte after the resource, rather than the last byte of the resource. This results in userland seeing resources as a byte larger than they actually are, for example a 32 byte BAR will be reported by a tool such as lspci as being 33 bytes in size: Region 2: I/O ports at 1000 [disabled] [size=33] Correct this by subtracting one from the calculated end address, reporting the correct address to userland. Signed-off-by: Paul Burton Reported-by: Rui Wang Fixes: 4c2924b725fb ("MIPS: PCI: Use pci_resource_to_user to map pci memory space properly") Cc: James Hogan Cc: Ralf Baechle Cc: Wolfgang Grandegger Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v3.12+ Patchwork: https://patchwork.linux-mips.org/patch/19829/ Signed-off-by: Greg Kroah-Hartman

MIPS: pci: Remove KERN_WARN instance inside the mt7620 driver

2017-11-30T08:40:43Z

commit 8593b18ad348733b5d5ddfa0c79dcabf51dff308 upstream. Switch the printk() call to the prefered pr_warn() api. Fixes: 7e5873d3755c ("MIPS: pci: Add MT7620a PCIE driver") Signed-off-by: John Crispin Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15321/ Signed-off-by: James Hogan Signed-off-by: Greg Kroah-Hartman

Update MIPS email addresses

2017-11-03T16:02:30Z

MIPS will soon not be a part of Imagination Technologies, and as such many @imgtec.com email addresses will no longer be valid. This patch updates the addresses for those who: - Have 10 or more patches in mainline authored using an @imgtec.com email address, or any patches dated within the past year. - Are still with Imagination but leaving as part of the MIPS business unit, as determined from an internal email address list. - Haven't already updated their email address (ie. JamesH) or expressed a desire to be excluded (ie. Maciej). - Acked v2 or earlier of this patch, which leaves Deng-Cheng, Matt & myself. New addresses are of the form firstname.lastname@mips.com, and all verified against an internal email address list. An entry is added to .mailmap for each person such that get_maintainer.pl will report the new addresses rather than @imgtec.com addresses which will soon be dead. Instances of the affected addresses throughout the tree are then mechanically replaced with the new @mips.com address. Signed-off-by: Paul Burton Cc: Deng-Cheng Zhu Cc: Deng-Cheng Zhu Acked-by: Dengcheng Zhu Cc: Matt Redfearn Cc: Matt Redfearn Acked-by: Matt Redfearn Cc: Andrew Morton Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Signed-off-by: Linus Torvalds

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

MIPS: PCI: Move map_irq() hooks out of initdata

2017-09-19T19:55:26Z

04c81c7293df ("MIPS: PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks") moved the PCI IRQ fixup to the new host bridge map/swizzle_irq() hooks mechanism. Those hooks can also be called after boot, when all the __init/__initdata/__initconst sections have been freed. Therefore, functions called by them (and the data they refer to) must not be marked as __init/__initdata/__initconst lest compilation trigger section mismatch warnings. Fix all the board files map_irq() hooks by simply removing the respective __init/__initdata/__initconst section markers and by adding another persistent hook IRQ map for the txx9 board files. Fixes: 04c81c7293df ("MIPS: PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks") Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Arnd Bergmann Cc: Ralf Baechle Cc: Steve French