kernel.git/arch/mips/pci, branch linux-4.11.y

MIPS: PCI: add controllers before the specified head

2017-04-12T22:51:20Z

With commit 23dac14d058f ("MIPS: PCI: Use struct list_head lists") new controllers are added after the specified head where they where added before the specified head previously. Use list_add_tail to restore the former order. This patches fixes the following PCI error on lantiq: pci 0000:01:00.0: BAR 0: error updating (0x1c000004 != 0x000000) Fixes: 23dac14d058f ("MIPS: PCI: Use struct list_head lists") Signed-off-by: Mathias Kresin Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15808/ Signed-off-by: Ralf Baechle

Merge tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

2017-02-25T21:45:43Z

Pull rdma DMA mapping updates from Doug Ledford: "Drop IB DMA mapping code and use core DMA code instead. Bart Van Assche noted that the ib DMA mapping code was significantly similar enough to the core DMA mapping code that with a few changes it was possible to remove the IB DMA mapping code entirely and switch the RDMA stack to use the core DMA mapping code. This resulted in a nice set of cleanups, but touched the entire tree and has been kept separate for that reason." * tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits) IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it IB/core: Remove ib_device.dma_device nvme-rdma: Switch from dma_device to dev.parent RDS: net: Switch from dma_device to dev.parent IB/srpt: Modify a debug statement IB/srp: Switch from dma_device to dev.parent IB/iser: Switch from dma_device to dev.parent IB/IPoIB: Switch from dma_device to dev.parent IB/rxe: Switch from dma_device to dev.parent IB/vmw_pvrdma: Switch from dma_device to dev.parent IB/usnic: Switch from dma_device to dev.parent IB/qib: Switch from dma_device to dev.parent IB/qedr: Switch from dma_device to dev.parent IB/ocrdma: Switch from dma_device to dev.parent IB/nes: Remove a superfluous assignment statement IB/mthca: Switch from dma_device to dev.parent IB/mlx5: Switch from dma_device to dev.parent IB/mlx4: Switch from dma_device to dev.parent IB/i40iw: Remove a superfluous assignment statement IB/hns: Switch from dma_device to dev.parent ...

treewide: Move dma_ops from struct dev_archdata into struct device

2017-01-24T17:23:35Z

Some but not all architectures provide set_dma_ops(). Move dma_ops from struct dev_archdata into struct device such that it becomes possible on all architectures to configure dma_ops per device. Signed-off-by: Bart Van Assche Acked-by: Greg Kroah-Hartman Cc: Benjamin Herrenschmidt Cc: Boris Ostrovsky Cc: David Woodhouse Cc: Juergen Gross Cc: H. Peter Anvin Cc: Ingo Molnar Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Russell King Cc: x86@kernel.org Signed-off-by: Doug Ledford

MIPS: TXx9: Modernize printing of kernel messages

2017-01-03T15:34:32Z

- Convert from printk() to pr_*(), - Add missing continuations, to fix user-visible breakage, - Drop superfluous casts (u64 has been unsigned long long on all architectures for many years). On rbtx4927, this restores the kernel output like: -TX4927 SDRAMC -- - CR0:0000007e00000544 - TR:32800030e +TX4927 SDRAMC -- CR0:0000007e00000544 TR:32800030e and: -PCIC -- PCICLK: -Internal(33.3MHz) - +PCIC -- PCICLK:Internal(33.3MHz) Fixes: 4bcc595ccd80decb ("printk: reinstate KERN_CONT for printing continuation lines") Signed-off-by: Geert Uytterhoeven Reviewed-by: Atsushi Nemoto Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14646/ Signed-off-by: Ralf Baechle

MIPS: Sanitise coherentio semantics

2016-10-06T16:01:28Z

The coherentio variable has previously been used as a boolean value, indicating whether the user specified that coherent I/O should be enabled or disabled. It failed to take into account the case where the user does not specify any preference, in which case it makes sense that we should default to coherent I/O if the hardware supports it (hw_coherentio is non-zero). Introduce an enum to clarify the 3 different values of coherentio & use it throughout the code, modifying plat_device_is_coherent() & r4k_cache_init() to take into account the default case. Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Cc: Paul Burton Patchwork: https://patchwork.linux-mips.org/patch/14347/ Signed-off-by: Ralf Baechle

MIPS: PCI: Support generic drivers

2016-10-06T16:00:52Z

Introduce support for PCI drivers using only functionality provided generically by the PCI subsystem, by adding the minimum arch-provided functions required. The driver this has been developed for & tested with the xilinx-pcie on a MIPS Boston development board. Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14346/ Signed-off-by: Ralf Baechle

MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY

2016-10-06T16:00:05Z

Introduce 2 Kconfig symbols, CONFIG_PCI_DRIVERS_GENERIC & CONFIG_PCI_DRIVERS_LEGACY, which indicate whether the system should be built to for PCI drivers using the MIPS-specific struct pci_controller API (hereafter "legacy" drivers) or more generic drivers using only functionality provided by the PCI core (hereafter "generic" drivers). The Kconfig entries are created such that platforms have to select CONFIG_PCI_DRIVERS_GENERIC if they wish to use it - that is, the default is CONFIG_PCI_DRIVERS_LEGACY so that existing platforms need no modification. The functions declared in pci.h are rearranged with those provided only by pci-legacy.c being guarded by an #ifdef CONFIG_PCI_DRIVERS_LEGACY to ensure they are only used in configurations where they are implemented. Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14345/ Signed-off-by: Ralf Baechle

MIPS: PCI: Split pci.c into pci.c & pci-legacy.c

2016-10-06T15:59:57Z

Split out the parts of pci.c that are used by existing systems with MIPS-style PCI drivers but that will not be used by systems with more generic PCI drivers such as pcie-xilinx. This is done in preparation for allowing configurations where the code moved to pci-legacy.c is not built. Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Cc: Paul Burton Patchwork: https://patchwork.linux-mips.org/patch/14344/ Signed-off-by: Ralf Baechle

MIPS: PCI: Inline pcibios_assign_all_busses

2016-10-06T15:57:52Z

The MIPS implementation of pcibios_assign_all_busses trivially returns 1. Implement it as a static function in asm/pci.h such that the compiler can inline it & optimise out never-taken paths. Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14343/ Signed-off-by: Ralf Baechle

MIPS: PCI: Make pcibios_set_cache_line_size an initcall

2016-10-06T15:57:41Z

In preparation for allowing configurations in which pcibios_init is not included, make pcibios_set_cache_line_size an initcall. arch_initcall is used such that it runs before the pcibios_init subsys_initcall for platforms that continue to use it. Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14342/ Signed-off-by: Ralf Baechle