kernel.git/arch/mips/netlogic, branch linux-4.11.y

MIPS: Add missing include files

2017-03-08T09:38:06Z

After the split of linux/sched.h, several platforms in arch/mips stopped building. Add the respective additional #include statements to fix the problem I first tried adding these into asm/processor.h, but ran into circular header dependencies with that which I could not figure out. The commit I listed as causing the problem is the branch merge, as there is likely a combination of multiple patches in that branch. Signed-off-by: Arnd Bergmann Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-mips@linux-mips.org Cc: ralf@linux-mips.org Fixes: 1827adb11ad2 ("Merge branch 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip") Link: http://lkml.kernel.org/r/20170308072931.3836696-1-arnd@arndb.de Signed-off-by: Ingo Molnar

Merge tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

2017-02-25T21:45:43Z

Pull rdma DMA mapping updates from Doug Ledford: "Drop IB DMA mapping code and use core DMA code instead. Bart Van Assche noted that the ib DMA mapping code was significantly similar enough to the core DMA mapping code that with a few changes it was possible to remove the IB DMA mapping code entirely and switch the RDMA stack to use the core DMA mapping code. This resulted in a nice set of cleanups, but touched the entire tree and has been kept separate for that reason." * tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits) IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it IB/core: Remove ib_device.dma_device nvme-rdma: Switch from dma_device to dev.parent RDS: net: Switch from dma_device to dev.parent IB/srpt: Modify a debug statement IB/srp: Switch from dma_device to dev.parent IB/iser: Switch from dma_device to dev.parent IB/IPoIB: Switch from dma_device to dev.parent IB/rxe: Switch from dma_device to dev.parent IB/vmw_pvrdma: Switch from dma_device to dev.parent IB/usnic: Switch from dma_device to dev.parent IB/qib: Switch from dma_device to dev.parent IB/qedr: Switch from dma_device to dev.parent IB/ocrdma: Switch from dma_device to dev.parent IB/nes: Remove a superfluous assignment statement IB/mthca: Switch from dma_device to dev.parent IB/mlx5: Switch from dma_device to dev.parent IB/mlx4: Switch from dma_device to dev.parent IB/i40iw: Remove a superfluous assignment statement IB/hns: Switch from dma_device to dev.parent ...

MIPS: Avoid old-style declaration

2017-01-25T01:51:11Z

gcc warns about nonstandard declarations: arch/mips/sgi-ip32/ip32-irq.c:31:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration] arch/mips/sgi-ip32/ip32-irq.c:36:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration] arch/mips/sgi-ip27/ip27-klnuma.c: In function 'replicate_kernel_text': arch/mips/sgi-ip27/ip27-klnuma.c:85:116: error: old-style function definition [-Werror=old-style-definition] Moving 'inline' before the return type, and adding argument types shuts up the warning here. This patch affects several platforms, but all in a trivial way. I'm fixing up all instances I found in any of the 'defconfig' builds. Signed-off-by: Arnd Bergmann Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15050/ Signed-off-by: Ralf Baechle

treewide: Constify most dma_map_ops structures

2017-01-24T17:23:35Z

Most dma_map_ops structures are never modified. Constify these structures such that these can be write-protected. This patch has been generated as follows: git grep -l 'struct dma_map_ops' | xargs -d\\n sed -i \ -e 's/struct dma_map_ops/const struct dma_map_ops/g' \ -e 's/const struct dma_map_ops {/struct dma_map_ops {/g' \ -e 's/^const struct dma_map_ops;$/struct dma_map_ops;/' \ -e 's/const const struct dma_map_ops /const struct dma_map_ops /g'; sed -i -e 's/const $struct dma_map_ops intel_dma_ops$/\1/' \ $(git grep -l 'struct dma_map_ops intel_dma_ops'); sed -i -e 's/const $struct dma_map_ops dma_iommu_ops$/\1/' \ $(git grep -l 'struct dma_map_ops' | grep ^arch/powerpc); sed -i -e '/^struct vmd_dev {$/,/^};$/ s/const $struct dma_map_ops[[:blank:]]dma_ops;$/\1/' \ -e '/^static void vmd_setup_dma_ops/,/^}$/ s/const $struct dma_map_ops \*dest$/\1/' \ -e 's/const $struct dma_map_ops \*dest = \&vmd->dma_ops$/\1/' \ drivers/pci/host/*.c sed -i -e '/^void __init pci_iommu_alloc(void)$/,/^}$/ s/dma_ops->/intel_dma_ops./' arch/ia64/kernel/pci-dma.c sed -i -e 's/static const struct dma_map_ops sn_dma_ops/static struct dma_map_ops sn_dma_ops/' arch/ia64/sn/pci/pci_dma.c sed -i -e 's/(const struct dma_map_ops \*)//' drivers/misc/mic/bus/vop_bus.c Signed-off-by: Bart Van Assche Reviewed-by: Christoph Hellwig Cc: Benjamin Herrenschmidt Cc: Boris Ostrovsky Cc: David Woodhouse Cc: Juergen Gross Cc: H. Peter Anvin Cc: Ingo Molnar Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Russell King Cc: x86@kernel.org Signed-off-by: Doug Ledford

MIPS: Netlogic: Fix assembler warning from smpboot.S

2017-01-03T15:48:39Z

The netlogic platform can be built for either MIPS32 or MIPS64, and when built for MIPS32 (as by nlm_xlr_defconfig) the use of the dla pseudo-instruction leads to warnings such as the following from recent versions of the GNU assembler: arch/mips/netlogic/common/smpboot.S: Assembler messages: arch/mips/netlogic/common/smpboot.S:62: Warning: dla used to load 32-bit register; recommend using la instead arch/mips/netlogic/common/smpboot.S:63: Warning: dla used to load 32-bit register; recommend using la instead Avoid these warnings by using the PTR_LA macro to make use of the appropriate la or dla pseudo-instruction for the build. Signed-off-by: Paul Burton Fixes: 66d29985fab8 ("MIPS: Netlogic: Merge some of XLR/XLP wakup code") Cc: James Hogan Cc: Jayachandran C Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14185/ Signed-off-by: Ralf Baechle

MIPS: Netlogic: Exclude netlogic,xlp-pic code from XLR builds

2017-01-03T15:34:38Z

Code in arch/mips/netlogic/common/irq.c which handles the XLP PIC fails to build in XLR configurations due to cpu_is_xlp9xx not being defined, leading to the following build failure: arch/mips/netlogic/common/irq.c: In function ‘xlp_of_pic_init’: arch/mips/netlogic/common/irq.c:298:2: error: implicit declaration of function ‘cpu_is_xlp9xx’ [-Werror=implicit-function-declaration] if (cpu_is_xlp9xx()) { ^ Although the code was conditional upon CONFIG_OF which is indirectly selected by CONFIG_NLM_XLP_BOARD but not CONFIG_NLM_XLR_BOARD, the failing XLR with CONFIG_OF configuration can be configured manually or by randconfig. Fix the build failure by making the affected XLP PIC code conditional upon CONFIG_CPU_XLP which is used to guard the inclusion of asm/netlogic/xlp-hal/xlp.h that provides the required cpu_is_xlp9xx function. [ralf@linux-mips.org: Fixed up as per Jayachandran's suggestion.] Signed-off-by: Paul Burton Cc: Jayachandran C Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14524/ Signed-off-by: Ralf Baechle

clocksource: Use a plain u64 instead of cycle_t

2016-12-25T10:04:12Z

There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: John Stultz

dma-mapping: use unsigned long for dma_attrs

2016-08-04T12:50:07Z

The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski Acked-by: Vineet Gupta Acked-by: Robin Murphy Acked-by: Hans-Christian Noren Egtvedt Acked-by: Mark Salter [c6x] Acked-by: Jesper Nilsson [cris] Acked-by: Daniel Vetter [drm] Reviewed-by: Bart Van Assche Acked-by: Joerg Roedel [iommu] Acked-by: Fabien Dessenne [bdisp] Reviewed-by: Marek Szyprowski [vb2-core] Acked-by: David Vrabel [xen] Acked-by: Konrad Rzeszutek Wilk [xen swiotlb] Acked-by: Joerg Roedel [iommu] Acked-by: Richard Kuo [hexagon] Acked-by: Geert Uytterhoeven [m68k] Acked-by: Gerald Schaefer [s390] Acked-by: Bjorn Andersson Acked-by: Hans-Christian Noren Egtvedt [avr32] Acked-by: Vineet Gupta [arc] Acked-by: Robin Murphy [arm64 and dma-iommu] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

MIPS: Define & use CP0_EBase bit definitions

2016-05-13T13:30:25Z

Add definitions for the bits & fields in the CP0_EBase register, and use them from a few different places in arch/mips which hardcoded these values. Signed-off-by: James Hogan Cc: Jayachandran C Cc: Paolo Bonzini Cc: Radim Krčmář Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13222/ Signed-off-by: Ralf Baechle

MIPS: Netlogic: Fix CP0_EBASE redefinition warnings

2016-05-09T10:00:05Z

A couple of netlogic assembly files define CP0_EBASE to $15, the same as CP0_PRID in mipsregs.h, and use it for accessing both CP0_PRId and CP0_EBase registers. However commit 609cf6f2291a ("MIPS: CPS: Early debug using an ns16550-compatible UART") added a different definition of CP0_EBASE to mipsregs.h, which included a register select of 1. This causes harmless build warnings like the following: arch/mips/netlogic/common/reset.S:53:0: warning: "CP0_EBASE" redefined #define CP0_EBASE $15 ^ In file included from arch/mips/netlogic/common/reset.S:41:0: ./arch/mips/include/asm/mipsregs.h:63:0: note: this is the location of the previous definition #define CP0_EBASE $15, 1 ^ Update the code to use the definitions from mipsregs.h for accessing both registers. Fixes: 609cf6f2291a ("MIPS: CPS: Early debug using an ns16550-compatible UART") Signed-off-by: James Hogan Acked-by: Jayachandran C Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13183/ Signed-off-by: Ralf Baechle