kernel.git/arch/mips/kernel, branch linux-5.1.y

MIPS: uprobes: remove set but not used variable 'epc'

2019-06-25T03:34:49Z

[ Upstream commit f532beeeff0c0a3586cc15538bc52d249eb19e7c ] Fixes gcc '-Wunused-but-set-variable' warning: arch/mips/kernel/uprobes.c: In function 'arch_uprobe_pre_xol': arch/mips/kernel/uprobes.c:115:17: warning: variable 'epc' set but not used [-Wunused-but-set-variable] It's never used since introduction in commit 40e084a506eb ("MIPS: Add uprobes support.") Signed-off-by: YueHaibing Signed-off-by: Paul Burton Cc: Cc: Cc: Cc: Signed-off-by: Sasha Levin

mips: Make sure dt memory regions are valid

2019-06-15T09:52:58Z

[ Upstream commit 93fa5b280761a4dbb14c5330f260380385ab2b49 ] There are situations when memory regions coming from dts may be too big for the platform physical address space. This especially concerns XPA-capable systems. Bootloader may determine more than 4GB memory available and pass it to the kernel over dts memory node, while kernel is built without XPA/64BIT support. In this case the region may either simply be truncated by add_memory_region() method or by u64->phys_addr_t type casting. But in worst case the method can even drop the memory region if it exceeds PHYS_ADDR_MAX size. So lets make sure the retrieved from dts memory regions are valid, and if some of them aren't, just manually truncate them with a warning printed out. Signed-off-by: Serge Semin Signed-off-by: Paul Burton Cc: Ralf Baechle Cc: James Hogan Cc: Mike Rapoport Cc: Andrew Morton Cc: Michal Hocko Cc: Greg Kroah-Hartman Cc: Thomas Bogendoerfer Cc: Huacai Chen Cc: Stefan Agner Cc: Stephen Rothwell Cc: Alexandre Belloni Cc: Juergen Gross Cc: Serge Semin Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sasha Levin

MIPS: perf: Fix build with CONFIG_CPU_BMIPS5000 enabled

2019-05-25T16:16:39Z

commit 1b1f01b653b408ebe58fec78c566d1075d285c64 upstream. arch/mips/kernel/perf_event_mipsxx.c: In function 'mipsxx_pmu_enable_event': arch/mips/kernel/perf_event_mipsxx.c:326:21: error: unused variable 'event' [-Werror=unused-variable] struct perf_event *event = container_of(evt, struct perf_event, hw); ^~~~~ Fix this by making use of IS_ENABLED() to simplify the code and avoid unnecessary ifdefery. Fixes: 84002c88599d ("MIPS: perf: Fix perf with MT counting other threads") Signed-off-by: Florian Fainelli Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Cc: Peter Zijlstra Cc: Ingo Molnar Cc: Arnaldo Carvalho de Melo Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Namhyung Kim Cc: Ralf Baechle Cc: James Hogan Cc: linux-kernel@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v4.18+ Signed-off-by: Greg Kroah-Hartman

Merge tag 'syscalls-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

2019-04-23T20:34:17Z

Pull syscall numbering updates from Arnd Bergmann: "arch: add pidfd and io_uring syscalls everywhere This comes a bit late, but should be in 5.1 anyway: we want the newly added system calls to be synchronized across all architectures in the release. I hope that in the future, any newly added system calls can be added to all architectures at the same time, and tested there while they are in linux-next, avoiding dependencies between the architecture maintainer trees and the tree that contains the new system call" * tag 'syscalls-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: arch: add pidfd and io_uring syscalls everywhere

Merge tag 'mips_fixes_5.1_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2019-04-22T18:54:47Z

Pull MIPS fixes from Paul Burton: "A couple more MIPS fixes: - Fix indirect syscall tracing & seccomp filtering for big endian MIPS64 kernels, which previously loaded the syscall number incorrectly & would always use zero. - Fix performance counter IRQ setup for Atheros/ath79 SoCs, allowing perf to function on those systems. And not really a fix, but a useful addition: - Add a Broadcom mailing list to the MAINTAINERS entry for BMIPS systems to allow relevant engineers to track patch submissions" * tag 'mips_fixes_5.1_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: perf: ath79: Fix perfcount IRQ assignment MIPS: scall64-o32: Fix indirect syscall number load MAINTAINERS: BMIPS: Add internal Broadcom mailing list

MIPS: scall64-o32: Fix indirect syscall number load

2019-04-15T17:35:12Z

Commit 4c21b8fd8f14 (MIPS: seccomp: Handle indirect system calls (o32)) added indirect syscall detection for O32 processes running on MIPS64, but it did not work correctly for big endian kernel/processes. The reason is that the syscall number is loaded from ARG1 using the lw instruction while this is a 64-bit value, so zero is loaded instead of the syscall number. Fix the code by using the ld instruction instead. When running a 32-bit processes on a 64 bit CPU, the values are properly sign-extended, so it ensures the value passed to syscall_trace_enter is correct. Recent systemd versions with seccomp enabled whitelist the getpid syscall for their internal processes (e.g. systemd-journald), but call it through syscall(SYS_getpid). This fix therefore allows O32 big endian systems with a 64-bit kernel to run recent systemd versions. Signed-off-by: Aurelien Jarno Cc: # v3.15+ Reviewed-by: Philippe Mathieu-Daudé Signed-off-by: Paul Burton Cc: Ralf Baechle Cc: James Hogan Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org

arch: add pidfd and io_uring syscalls everywhere

2019-04-15T14:31:17Z

Add the io_uring and pidfd_send_signal system calls to all architectures. These system calls are designed to handle both native and compat tasks, so all entries are the same across architectures, only arm-compat and the generic tale still use an old format. Acked-by: Michael Ellerman (powerpc) Acked-by: Heiko Carstens (s390) Acked-by: Geert Uytterhoeven Signed-off-by: Arnd Bergmann

Merge tag 'mips_fixes_5.1_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2019-04-10T02:27:18Z

Pull MIPS fixes from Paul Burton: "A few minor MIPS fixes: - Provide struct pt_regs * from get_irq_regs() to kgdb_nmicallback() when handling an IPI triggered by kgdb_roundup_cpus(), matching the behavior of other architectures & resolving kgdb issues for SMP systems. - Defer a pointer dereference until after a NULL check in the irq_shutdown callback for SGI IP27 HUB interrupts. - A defconfig update for the MSCC Ocelot to enable some necessary drivers" * tag 'mips_fixes_5.1_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: generic: Add switchdev, pinctrl and fit to ocelot_defconfig MIPS: SGI-IP27: Fix use of unchecked pointer in shutdown_bridge_irq MIPS: KGDB: fix kgdb support for SMP platforms.

syscalls: Remove start and number from syscall_get_arguments() args

2019-04-05T13:26:43Z

At Linux Plumbers, Andy Lutomirski approached me and pointed out that the function call syscall_get_arguments() implemented in x86 was horribly written and not optimized for the standard case of passing in 0 and 6 for the starting index and the number of system calls to get. When looking at all the users of this function, I discovered that all instances pass in only 0 and 6 for these arguments. Instead of having this function handle different cases that are never used, simply rewrite it to return the first 6 arguments of a system call. This should help out the performance of tracing system calls by ptrace, ftrace and perf. Link: http://lkml.kernel.org/r/20161107213233.754809394@goodmis.org Cc: Oleg Nesterov Cc: Kees Cook Cc: Andy Lutomirski Cc: Dominik Brodowski Cc: Dave Martin Cc: "Dmitry V. Levin" Cc: x86@kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: uclinux-h8-devel@lists.sourceforge.jp Cc: linux-hexagon@vger.kernel.org Cc: linux-ia64@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: nios2-dev@lists.rocketboards.org Cc: openrisc@lists.librecores.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-riscv@lists.infradead.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: linux-xtensa@linux-xtensa.org Cc: linux-arch@vger.kernel.org Acked-by: Paul Burton # MIPS parts Acked-by: Max Filippov # For xtensa changes Acked-by: Will Deacon # For the arm64 bits Reviewed-by: Thomas Gleixner # for x86 Reviewed-by: Dmitry V. Levin Reported-by: Andy Lutomirski Signed-off-by: Steven Rostedt (VMware)

MIPS: KGDB: fix kgdb support for SMP platforms.

2019-03-28T18:35:58Z

KGDB_call_nmi_hook is called by other cpu through smp call. MIPS smp call is processed in ipi irq handler and regs is saved in handle_int. So kgdb_call_nmi_hook get regs by get_irq_regs and regs will be passed to kgdb_cpu_enter. Signed-off-by: Chong Qiao Reviewed-by: Douglas Anderson Acked-by: Daniel Thompson Signed-off-by: Paul Burton Cc: Ralf Baechle Cc: James Hogan Cc: Will Deacon Cc: Christophe Leroy Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: QiaoChong