kernel.git/arch/mips/kernel, branch linux-4.16.y

MIPS: prctl: Disallow FRE without FR with PR_SET_FP_MODE requests

2018-06-05T09:46:13Z

commit 28e4213dd331e944e7fca1954a946829162ed9d4 upstream. Having PR_FP_MODE_FRE (i.e. Config5.FRE) set without PR_FP_MODE_FR (i.e. Status.FR) is not supported as the lone purpose of Config5.FRE is to emulate Status.FR=0 handling on FPU hardware that has Status.FR=1 hardwired[1][2]. Also we do not handle this case elsewhere, and assume throughout our code that TIF_HYBRID_FPREGS and TIF_32BIT_FPREGS cannot be set both at once for a task, leading to inconsistent behaviour if this does happen. Return unsuccessfully then from prctl(2) PR_SET_FP_MODE calls requesting PR_FP_MODE_FRE to be set with PR_FP_MODE_FR clear. This corresponds to modes allowed by `mips_set_personality_fp'. References: [1] "MIPS Architecture For Programmers, Vol. III: MIPS32 / microMIPS32 Privileged Resource Architecture", Imagination Technologies, Document Number: MD00090, Revision 6.02, July 10, 2015, Table 9.69 "Config5 Register Field Descriptions", p. 262 [2] "MIPS Architecture For Programmers, Volume III: MIPS64 / microMIPS64 Privileged Resource Architecture", Imagination Technologies, Document Number: MD00091, Revision 6.03, December 22, 2015, Table 9.72 "Config5 Register Field Descriptions", p. 288 Fixes: 9791554b45a2 ("MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS") Signed-off-by: Maciej W. Rozycki Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: # 4.0+ Patchwork: https://patchwork.linux-mips.org/patch/19327/ Signed-off-by: James Hogan Signed-off-by: Greg Kroah-Hartman

MIPS: ptrace: Fix PTRACE_PEEKUSR requests for 64-bit FGRs

2018-06-05T09:46:12Z

commit c7e814628df65f424fe197dde73bfc67e4a244d7 upstream. Use 64-bit accesses for 64-bit floating-point general registers with PTRACE_PEEKUSR, removing the truncation of their upper halves in the FR=1 mode, caused by commit bbd426f542cb ("MIPS: Simplify FP context access"), which inadvertently switched them to using 32-bit accesses. The PTRACE_POKEUSR side is fine as it's never been broken and continues using 64-bit accesses. Fixes: bbd426f542cb ("MIPS: Simplify FP context access") Signed-off-by: Maciej W. Rozycki Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: # 3.15+ Patchwork: https://patchwork.linux-mips.org/patch/19334/ Signed-off-by: James Hogan Signed-off-by: Greg Kroah-Hartman

MIPS: Fix ptrace(2) PTRACE_PEEKUSR and PTRACE_POKEUSR accesses to o32 FGRs

2018-05-30T06:17:14Z

commit 9a3a92ccfe3620743d4ae57c987dc8e9c5f88996 upstream. Check the TIF_32BIT_FPREGS task setting of the tracee rather than the tracer in determining the layout of floating-point general registers in the floating-point context, correcting access to odd-numbered registers for o32 tracees where the setting disagrees between the two processes. Fixes: 597ce1723e0f ("MIPS: Support for 64-bit FP with O32 binaries") Signed-off-by: Maciej W. Rozycki Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: # 3.14+ Signed-off-by: James Hogan Signed-off-by: Greg Kroah-Hartman

MIPS: ptrace: Expose FIR register through FP regset

2018-05-30T06:17:14Z

commit 71e909c0cdad28a1df1fa14442929e68615dee45 upstream. Correct commit 7aeb753b5353 ("MIPS: Implement task_user_regset_view.") and expose the FIR register using the unused 4 bytes at the end of the NT_PRFPREG regset. Without that register included clients cannot use the PTRACE_GETREGSET request to retrieve the complete FPU register set and have to resort to one of the older interfaces, either PTRACE_PEEKUSR or PTRACE_GETFPREGS, to retrieve the missing piece of data. Also the register is irreversibly missing from core dumps. This register is architecturally hardwired and read-only so the write path does not matter. Ignore data supplied on writes then. Fixes: 7aeb753b5353 ("MIPS: Implement task_user_regset_view.") Signed-off-by: James Hogan Signed-off-by: Maciej W. Rozycki Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: # 3.13+ Patchwork: https://patchwork.linux-mips.org/patch/19273/ Signed-off-by: James Hogan Signed-off-by: Greg Kroah-Hartman

MIPS: BMIPS: Do not mask IPIs during suspend

2018-03-05T23:35:04Z

Commit a3e6c1eff548 ("MIPS: IRQ: Fix disable_irq on CPU IRQs") fixes an issue where disable_irq did not actually disable the irq. The bug caused our IPIs to not be disabled, which actually is the correct behavior. With the addition of commit a3e6c1eff548 ("MIPS: IRQ: Fix disable_irq on CPU IRQs"), the IPIs were getting disabled going into suspend, thus schedule_ipi() was not being called. This caused deadlocks where schedulable task were not being scheduled and other cpus were waiting for them to do something. Add the IRQF_NO_SUSPEND flag so an irq_disable will not be called on the IPIs during suspend. Signed-off-by: Justin Chen Fixes: a3e6c1eff548 ("MIPS: IRQ: Fix disabled_irq on CPU IRQs") Cc: Florian Fainelli Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17385/ [jhogan@kernel.org: checkpatch: wrap long lines and fix commit refs] Signed-off-by: James Hogan

Merge tag 'mips_fixes_4.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips

2018-02-16T17:31:37Z

Pull MIPS fixes from James Hogan: "A few fixes for outstanding MIPS issues: - an __init section mismatch warning when brcmstb_pm is enabled - a regression handling multiple mem=X@Y arguments (4.11) - a USB Kconfig select warning, and related sparc cleanup (4.16)" * tag 'mips_fixes_4.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: sparc,leon: Select USB_UHCI_BIG_ENDIAN_{MMIO,DESC} usb: Move USB_UHCI_BIG_ENDIAN_* out of USB_SUPPORT MIPS: Fix incorrect mem=X@Y handling MIPS: BMIPS: Fix section mismatch warning

Merge tag 'mips_4.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips

2018-02-13T17:35:17Z

Pull MIPS fix from James Hogan: "A single change (and associated DT binding update) to allow the address of the MIPS Cluster Power Controller (CPC) to be chosen by DT, which allows SMP to work on generic MIPS kernels where the bootloader hasn't configured the CPC address (i.e. the new Ranchu platform)" * tag 'mips_4.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: CPC: Map registers using DT in mips_cpc_default_phys_base() dt-bindings: Document mti,mips-cpc binding

MIPS: Fix incorrect mem=X@Y handling

2018-02-13T13:14:41Z

Commit 73fbc1eba7ff ("MIPS: fix mem=X@Y commandline processing") added a fix to ensure that the memory range between PHYS_OFFSET and low memory address specified by mem= cmdline argument is not later processed by free_all_bootmem. This change was incorrect for systems where the commandline specifies more than 1 mem argument, as it will cause all memory between PHYS_OFFSET and each of the memory offsets to be marked as reserved, which results in parts of the RAM marked as reserved (Creator CI20's u-boot has a default commandline argument 'mem=256M@0x0 mem=768M@0x30000000'). Change the behaviour to ensure that only the range between PHYS_OFFSET and the lowest start address of the memories is marked as protected. This change also ensures that the range is marked protected even if it's only defined through the devicetree and not only via commandline arguments. Reported-by: Mathieu Malaterre Signed-off-by: Marcin Nowakowski Fixes: 73fbc1eba7ff ("MIPS: fix mem=X@Y commandline processing") Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: # v4.11+ Tested-by: Mathieu Malaterre Patchwork: https://patchwork.linux-mips.org/patch/18562/ Signed-off-by: James Hogan

MIPS: BMIPS: Fix section mismatch warning

2018-02-13T11:53:28Z

Remove the __init annotation from bmips_cpu_setup() to avoid the following warning. WARNING: vmlinux.o(.text+0x35c950): Section mismatch in reference from the function brcmstb_pm_s3() to the function .init.text:bmips_cpu_setup() The function brcmstb_pm_s3() references the function __init bmips_cpu_setup(). This is often because brcmstb_pm_s3 lacks a __init annotation or the annotation of bmips_cpu_setup is wrong. Signed-off-by: Jaedon Shin Cc: Ralf Baechle Cc: Florian Fainelli Cc: Kevin Cernekee Cc: linux-mips@linux-mips.org Reviewed-by: James Hogan Reviewed-by: Florian Fainelli Patchwork: https://patchwork.linux-mips.org/patch/18589/ Signed-off-by: James Hogan

vfs: do bulk POLL* -> EPOLL* replacement

2018-02-11T22:34:03Z

This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^$[^\"]*$$\$/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro Signed-off-by: Linus Torvalds