kernel.git/arch/mips/kernel/smtc.c, branch linux-2.6.37.y

Fix IRQ flag handling naming

2010-10-07T13:08:55Z

Fix the IRQ flag handling naming. In linux/irqflags.h under one configuration, it maps: local_irq_enable() -> raw_local_irq_enable() local_irq_disable() -> raw_local_irq_disable() local_irq_save() -> raw_local_irq_save() ... and under the other configuration, it maps: raw_local_irq_enable() -> local_irq_enable() raw_local_irq_disable() -> local_irq_disable() raw_local_irq_save() -> local_irq_save() ... This is quite confusing. There should be one set of names expected of the arch, and this should be wrapped to give another set of names that are expected by users of this facility. Change this to have the arch provide: flags = arch_local_save_flags() flags = arch_local_irq_save() arch_local_irq_restore(flags) arch_local_irq_disable() arch_local_irq_enable() arch_irqs_disabled_flags(flags) arch_irqs_disabled() arch_safe_halt() Then linux/irqflags.h wraps these to provide: raw_local_save_flags(flags) raw_local_irq_save(flags) raw_local_irq_restore(flags) raw_local_irq_disable() raw_local_irq_enable() raw_irqs_disabled_flags(flags) raw_irqs_disabled() raw_safe_halt() with type checking on the flags 'arguments', and then wraps those to provide: local_save_flags(flags) local_irq_save(flags) local_irq_restore(flags) local_irq_disable() local_irq_enable() irqs_disabled_flags(flags) irqs_disabled() safe_halt() with tracing included if enabled. The arch functions can now all be inline functions rather than some of them having to be macros. Signed-off-by: David Howells [X86, FRV, MN10300] Signed-off-by: Chris Metcalf [Tile] Signed-off-by: Michal Simek [Microblaze] Tested-by: Catalin Marinas [ARM] Acked-by: Thomas Gleixner Acked-by: Haavard Skinnemoen [AVR] Acked-by: Tony Luck [IA-64] Acked-by: Hirokazu Takata [M32R] Acked-by: Greg Ungerer [M68K/M68KNOMMU] Acked-by: Ralf Baechle [MIPS] Acked-by: Kyle McMartin [PA-RISC] Acked-by: Paul Mackerras [PowerPC] Acked-by: Martin Schwidefsky [S390] Acked-by: Chen Liqin [Score] Acked-by: Matt Fleming [SH] Acked-by: David S. Miller [Sparc] Acked-by: Chris Zankel [Xtensa] Reviewed-by: Richard Henderson [Alpha] Reviewed-by: Yoshinori Sato [H8300] Cc: starvik@axis.com [CRIS] Cc: jesper.nilsson@axis.com [CRIS] Cc: linux-cris-kernel@axis.com

MIPS: SMTC: Use %p to format pointers

2010-08-05T12:26:26Z

While at it, drop 0x prefix. Signed-off-by: Kulikov Vasiliy To: kernel-janitors@vger.kernel.org Cc: Chris Dearman Cc: "Robert P. J. Day" Cc: Rusty Russell Cc: André Goddard Rosa Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1458/ Signed-off-by: Ralf Baechle

MIPS: Initialize an atomic_t properly with ATOMIC_INIT(0).

2010-04-12T16:26:12Z

Signed-off-by: Robert P. J. Day To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1008/ Signed-off-by: Ralf Baechle

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

MIPS: Tracing: Add IRQENTRY_EXIT section for MIPS

2009-12-17T01:57:24Z

This patch add a new section for MIPS to record the block of the hardirq handling for function graph tracer(print_graph_irq) via adding the __irq_entry annotation to the the entrypoints of the hardirqs(the block with irq_enter()...irq_exit()). Thanks goes to Steven & Frederic Weisbecker for their feedbacks. Signed-off-by: Wu Zhangjin Cc: Steven Rostedt Cc: Nicholas Mc Guire Cc: zhangfx@lemote.com Cc: Wu Zhangjin Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Frederic Weisbecker Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Reviewed-by: Frederic Weisbecker Patchwork: http://patchwork.linux-mips.org/patch/676/ Signed-off-by: Ralf Baechle

tree-wide: fix assorted typos all over the place

2009-12-04T14:39:55Z

That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa Signed-off-by: Jiri Kosina

MIPS: SMTC: Avoid queing multiple reschedule IPIs

2009-11-02T11:00:06Z

Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle

MIPS: SMTC: Remove duplicate structure field initialization

2009-09-30T19:46:59Z

The definition of the irq_ipi structure has two initializations of the flags field. This combines them. [Ralf: The issue was originally introduced by commit be4894196d79455f420dd7bb78be7dc73bec115c (linux-mips.org) rsp. 033890b084adfa367c544864451d7730552ce8bf (kernel.org). The original intention of the code was to initialize .flags with both flags ored together. The broken C code as actually implemented will be compiled by an equally broken gcc to use only the last initialization, that is IRQF_PERCPU which means this turned into an SMTC bug for 2.6.23 and newer.] The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @r@ identifier I, s, fld; position p0,p; expression E; @@ struct I s =@p0 { ... .fld@p = E, ...}; @s@ identifier I, s, r.fld; position r.p0,p; expression E; @@ struct I s =@p0 { ... .fld@p = E, ...}; @script:python@ p0 << r.p0; fld << r.fld; ps << s.p; pr << r.p; @@ if int(ps[0].line)!=int(pr[0].line) or int(ps[0].column)!=int(pr[0].column): cocci.print_main(fld,p0) // Signed-off-by: Julia Lawall Signed-off-by: Ralf Baechle

cpumask: Use accessors for cpu_*_mask: mips

2009-09-24T00:04:48Z

Use the accessors rather than frobbing bits directly (the new versions are const). Signed-off-by: Rusty Russell Signed-off-by: Mike Travis

MIPS: Remove useless zero initializations.

2009-09-17T18:07:51Z

Signed-off-by: Ralf Baechle