kernel.git/arch/mips/kernel/mips-cpc.c, branch linux-4.10.y

MIPS: CPC: Provide default mips_cpc_default_phys_base to ignore CPC

2016-11-03T23:17:46Z

Provide a default implementation of mips_cpc_default_phys_base() which simply returns 0, and adjust mips_cpc_phys_base() to allow for mips_cpc_default_phys_base() returning 0. This allows kernels which include CPC support to be built without platform code & simply ignore the CPC if it wasn't already enabled by the bootloader. This fixes link failures such as the following from generic defconfigs: arch/mips/built-in.o: In function `mips_cpc_phys_base': arch/mips/kernel/mips-cpc.c:47: undefined reference to `mips_cpc_default_phys_base' [ralf@linux-mips.org: changed prototype for coding style compliance.] Signed-off-by: Paul Burton Reported-by: kbuild test robot Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14401/ Signed-off-by: Ralf Baechle

MIPS: CPC: Avoid lock when MIPS CM >= 3 is present

2016-10-04T14:13:57Z

MIPS CM version 3 removed the CPC_CL_OTHER register and instead the CM_CL_OTHER register is used to redirect the CPC_OTHER region. As such, we should not write the unimplmented register and can avoid the spinlock as well. These lock functions should aleady be called within the context of a mips_cm_{lock,unlock}_other pair ensuring the correct CPC_OTHER region will be accessed. Signed-off-by: Matt Redfearn Reviewed-by: Paul Burton Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14219/ Signed-off-by: Ralf Baechle

MIPS: CPC: Convert bare 'unsigned' to 'unsigned int'

2016-10-04T14:13:57Z

Checkpatch complains about use of bare unsigned type. Signed-off-by: Matt Redfearn Reviewed-by: Paul Burton Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14217/ Signed-off-by: Ralf Baechle

MIPS: CM, CPC: Ensure core-other GCRs reflect the correct core

2015-11-11T07:35:18Z

Ensure the update to which core the core-other GCR regions reflect has taken place before any core-other GCRs are accessed by placing a memory barrier (sync instruction) between the write to the core-other registers and any such GCR accesses. Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Cc: Bjorn Helgaas Cc: linux-kernel@vger.kernel.org Cc: Markos Chandras Patchwork: https://patchwork.linux-mips.org/patch/11209/ Signed-off-by: Ralf Baechle

MIPS: CPC: Remove "weak" from mips_cpc_phys_base() and make it static

2015-08-26T13:23:37Z

There's only one implementation of mips_cpc_phys_base(), and it's only used within the same file, so it doesn't need to be weak, and it doesn't need an extern declaration. Remove the extern mips_cpc_phys_base() declaration and make it static. [ralf@linux-mips.org: Fixed conflict.] Signed-off-by: Bjorn Helgaas CC: linux-mips@linux-mips.org Cc: Andrew Bresticker Cc: James Hogan Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10681/ Signed-off-by: Ralf Baechle

MIPS: CPC: Fix type for GCR CPC base reg for 64-bit

2015-08-26T13:23:14Z

The GCR CPC base register is 64-bit on 64-bit processors so use the appropriate field. Signed-off-by: Markos Chandras Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10645/ Signed-off-by: Ralf Baechle

MIPS: Replace use of phys_t with phys_addr_t.

2014-11-24T21:47:31Z

Signed-off-by: Ralf Baechle

MIPS: smp-cps: rework core/VPE initialisation

2014-05-28T15:20:28Z

When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton

MIPS: CPC: provide locking functions

2014-05-02T15:39:14Z

This patch provides functions to lock & unlock access to the "core-other" register region of the CPC. Without performing appropriate locking it is possible for code using this region to be preempted or to race with code on another VPE within the same core, with one changing the core which the "core-other" region is acting upon at an inopportune time for the other. Signed-off-by: Paul Burton

MIPS: Add CPC probe, access functions

2014-03-06T20:25:23Z

This patch introduces code to probe for a MIPS Cluster Power Controller & accessor functions to allow for easy register access. This support code will be used by a subsequent patch. Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6361/ Signed-off-by: Ralf Baechle