kernel.git/arch/mips/configs, branch linux-5.1.y

MIPS: generic: Add switchdev, pinctrl and fit to ocelot_defconfig

2019-04-04T18:14:45Z

Some of the configuration were not selected by default anymore, therefore enable them again. Also remove some configs which are used for MSCC Ocelot. Signed-off-by: Horatiu Vultur Signed-off-by: Paul Burton Cc: Cc: Cc: Cc: Cc: Cc:

Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt

2019-03-09T18:54:24Z

Pull fscrypt updates from Eric Biggers: "First: Ted, Jaegeuk, and I have decided to add me as a co-maintainer for fscrypt, and we're now using a shared git tree. So we've updated MAINTAINERS accordingly, and I'm doing the pull request this time. The actual changes for v5.1 are: - Remove the fs-specific kconfig options like CONFIG_EXT4_ENCRYPTION and make fscrypt support for all fscrypt-capable filesystems be controlled by CONFIG_FS_ENCRYPTION, similar to how CONFIG_QUOTA works. - Improve error code for rename() and link() into encrypted directories. - Various cleanups" * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: MAINTAINERS: add Eric Biggers as an fscrypt maintainer fscrypt: return -EXDEV for incompatible rename or link into encrypted dir fscrypt: remove filesystem specific build config option f2fs: use IS_ENCRYPTED() to check encryption status ext4: use IS_ENCRYPTED() to check encryption status fscrypt: remove CRYPTO_CTR dependency

Merge tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2019-03-05T19:28:25Z

Pull MIPS updates from Paul Burton: - Support for the MIPSr6 MemoryMapID register & Global INValidate TLB (GINVT) instructions, allowing for more efficient TLB maintenance when running on a CPU such as the I6500 that supports these. - Enable huge page support for MIPS64r6. - Optimize post-DMA cache sync by removing that code entirely for kernel configurations in which we know it won't be needed. - The number of pages allocated for interrupt stacks is now calculated correctly, where before we would wastefully allocate too much memory in some configurations. - The ath79 platform migrates to devicetree. - The bcm47xx platform sees fixes for the Buffalo WHR-G54S board. - The ingenic/jz4740 platform gains support for appended devicetrees. - The cavium_octeon, lantiq, loongson32 & sgi-ip27 platforms all see cleanups as do various pieces of core architecture code. * tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (66 commits) MIPS: lantiq: Remove separate GPHY Firmware loader MIPS: ingenic: Add support for appended devicetree MIPS: SGI-IP27: rework HUB interrupts MIPS: SGI-IP27: do boot CPU init later MIPS: SGI-IP27: do xtalk scanning later MIPS: SGI-IP27: use pr_info/pr_emerg and pr_cont to fix output MIPS: SGI-IP27: clean up bridge access and header files MIPS: SGI-IP27: get rid of volatile and hubreg_t MIPS: irq: Allocate accurate order pages for irq stack MIPS: dma-noncoherent: Remove bogus condition in dma_sync_phys() MIPS: eBPF: Remove REG_32BIT_ZERO_EX MIPS: eBPF: Always return sign extended 32b values MIPS: CM: Fix indentation MIPS: BCM47XX: Fix/improve Buffalo WHR-G54S support MIPS: OCTEON: program rx/tx-delay always from DT MIPS: OCTEON: delete board-specific link status MIPS: OCTEON: don't lie about interface type of CN3005 board MIPS: OCTEON: warn if deprecated link status is being used MIPS: OCTEON: add fixed-link nodes to in-kernel device tree MIPS: Delete unused flush_cache_sigtramp() ...

MIPS: lantiq: Remove separate GPHY Firmware loader

2019-02-25T22:17:10Z

The separate GPHY Firmware loader driver is not used any more, the GPHY firmware is now loaded by the GSWIP switch driver which also makes use of the GPHY. Remove the old unused GPHY firmware loader driver. The GPHY firmware is useless without an Ethernet and switch driver, it should not harm if loading this does not work for system using an old device tree. I am not aware of any vendor separating the device tree from the kernel binary, it should be ok to remove this. The code and the functionality form this separate GPHY firmware loader was added to the gswip driver in commit 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Hauke Mehrtens Signed-off-by: Paul Burton Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: john@phrozen.org Cc: netdev@vger.kernel.org

fscrypt: remove filesystem specific build config option

2019-01-24T04:56:43Z

In order to have a common code base for fscrypt "post read" processing for all filesystems which support encryption, this commit removes filesystem specific build config option (e.g. CONFIG_EXT4_FS_ENCRYPTION) and replaces it with a build option (i.e. CONFIG_FS_ENCRYPTION) whose value affects all the filesystems making use of fscrypt. Reviewed-by: Eric Biggers Signed-off-by: Chandan Rajendra Signed-off-by: Eric Biggers

MIPS: ath79: Enable OF serial ports in the default config

2019-01-07T21:39:06Z

CONFIG_SERIAL_OF_PLATFORM is needed to get a working console on the OF boards, enable it in the default config to get a working setup out of the box. Signed-off-by: Alban Bedel Signed-off-by: Paul Burton Cc: linux-mips@vger.kernel.org Cc: Ralf Baechle Cc: James Hogan Cc: linux-kernel@vger.kernel.org

Merge tag 'mips_4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2018-12-26T18:45:33Z

Pull MIPS updates from Paul Burton: "Here's the main MIPS pull for Linux 4.21. Core architecture changes include: - Syscall tables & definitions for unistd.h are now generated by scripts, providing greater consistency with other architectures & making it easier to add new syscalls. - Support for building kernels with no floating point support, upon which any userland attempting to use floating point instructions will receive a SIGILL. Mostly useful to shrink the kernel & as preparation for nanoMIPS support which does not yet include FP. - MIPS SIMD Architecture (MSA) vector register context is now exposed by ptrace via a new NT_MIPS_MSA regset. - ASIDs are now stored as 64b values even for MIPS32 kernels, expanding the ASID version field sufficiently that we don't need to worry about overflow & avoiding rare issues with reused ASIDs that have been observed in the wild. - The branch delay slot "emulation" page is now mapped without write permission for the user, preventing its use as a nice location for attacks to execute malicious code from. - Support for ioremap_prot(), primarily to allow gdb or other ptrace users the ability to view their tracee's memory using the same cache coherency attribute. - Optimizations to more cpu_has_* macros, allowing more to be compile-time constant where possible. - Enable building the whole kernel with UBSAN instrumentation. - Enable building the kernel with link-time dead code & data elimination. Platform specific changes include: - The Boston board gains a workaround for DMA prefetching issues with the EG20T Platform Controller Hub that it uses. - Cleanups to Cavium Octeon code removing about 20k lines of redundant code, mostly unused or duplicate register definitions in headers. - defconfig updates for the DECstation machines, including new defconfigs for r4k & 64b machines. - Further work on Loongson 3 support. - DMA fixes for SiByte machines" * tag 'mips_4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (95 commits) MIPS: math-emu: Write-protect delay slot emulation pages MIPS: Remove struct mm_context_t fp_mode_switching field mips: generate uapi header and system call table files mips: add system call table generation support mips: remove syscall table entries mips: add +1 to __NR_syscalls in uapi header mips: rename scall64-64.S to scall64-n64.S mips: remove unused macros mips: add __NR_syscalls along with __NR_Linux_syscalls MIPS: Expand MIPS32 ASIDs to 64 bits MIPS: OCTEON: delete redundant register definitions MIPS: OCTEON: cvmx_gmxx_inf_mode: use oldest forward compatible definition MIPS: OCTEON: cvmx_mio_fus_dat3: use oldest forward compatible definition MIPS: OCTEON: cvmx_pko_mem_debug8: use oldest forward compatible definition MIPS: OCTEON: octeon-usb: use common gpio_bit definition MIPS: OCTEON: enable all OCTEON drivers in defconfig mips: annotate implicit fall throughs MIPS: Hardcode cpu_has_mips* where target ISA allows MIPS: MT: Remove norps command line parameter MIPS: Only include mmzone.h when CONFIG_NEED_MULTIPLE_NODES=y ...

MIPS: OCTEON: enable all OCTEON drivers in defconfig

2018-12-04T23:47:03Z

Enable all OCTEON drivers in defconfig. Currently oct_ilm and octeon-rng are still missing; enable those to get them included in kernel builds. Signed-off-by: Aaro Koskinen Signed-off-by: Paul Burton Cc: Ralf Baechle Cc: James Hogan Cc: linux-mips@vger.kernel.org

MIPS: Regenerate defconfigs

2018-11-21T05:05:40Z

A couple of patches have come up recently to remove particular instances of obsolete Kconfig symbols from defconfigs. Rather than doing this piecemeal, simply regenerate them all. Signed-off-by: Paul Burton References: https://patchwork.linux-mips.org/patch/19635/ References: https://patchwork.linux-mips.org/patch/21156/ Patchwork: https://patchwork.linux-mips.org/patch/21184/ Cc: Anders Roxell Cc: Krzysztof Kozlowski Cc: linux-mips@linux-mips.org

MIPS: OCTEON: cavium_octeon_defconfig: re-enable OCTEON USB driver

2018-11-12T19:36:53Z

Re-enable OCTEON USB driver which is needed on older hardware (e.g. EdgeRouter Lite) for mass storage etc. This got accidentally deleted when config options were changed for OCTEON2/3 USB. Signed-off-by: Aaro Koskinen Signed-off-by: Paul Burton Fixes: f922bc0ad08b ("MIPS: Octeon: cavium_octeon_defconfig: Enable more drivers") Patchwork: https://patchwork.linux-mips.org/patch/21077/ Cc: Ralf Baechle Cc: James Hogan Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # 4.14+