kernel.git/arch/mips/configs/generic, branch linux-5.3.y

Merge tag 'nand/for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next

2019-05-05T09:54:11Z

NAND core changes: - Support having the bad block markers in either the first, second or last page of a block. The combination of all three location is now possible. - Constification of NAND_OP_PARSER(_PATTERN) elements. - Generic NAND DT bindings changed to yaml format (can be used to check the proposed bindings. First platform to be fully supported: sunxi. - Stopped using several legacy hooks. - Preparation to use the generic NAND layer with the addition of several helpers and the removal of the struct nand_chip from generic functions. - Kconfig cleanup to prepare the introduction of external ECC engines support. - Fallthrough comments. - Introduction of the SPI-mem dirmap API for SPI-NAND devices. Raw NAND controller drivers changes: - nandsim: * Switch to ->exec-op(). - meson: * Misc cleanups and fixes. * New OOB layout. - Sunxi: * A23/A33 NAND DMA support. - Ingenic: * Full reorganization and cleanup. * Clear separation between NAND controller and ECC engine. * Support JZ4740 an JZ4725B. - Denali: * Clear controller/chip separation. * ->exec_op() migration. * Various cleanups. - fsl_elbc: * Enable software ECC support. - Atmel: * Sam9x60 support. - GPMI: * Introduce the GPMI_IS_MXS() macro. - Various trivial/spelling/coding style fixes.

mtd: rawnand: Clarify Kconfig entry MTD_NAND

2019-04-18T06:54:00Z

MTD_NAND is large and encloses much more than what the symbol is actually used for: raw NAND. Clarify the symbol by naming it MTD_RAW_NAND instead. Signed-off-by: Miquel Raynal

mtd: nand: Clarify Kconfig entry for software Hamming ECC entries

2019-04-18T06:54:00Z

The software Hamming ECC correction implementation is referred as MTD_NAND_ECC which is too generic. Rename it MTD_NAND_ECC_SW_HAMMING. Also rename MTD_NAND_ECC_SMC which is an SMC quirk in the Hamming implementation as MTD_NAND_ECC_SW_HAMMING_SMC. Signed-off-by: Miquel Raynal

mtd: nand: Clarify Kconfig entry for software BCH ECC algorithm

2019-04-18T06:54:00Z

There is no point in having two distinct entries, merge them and rename the symbol for more clarity: MTD_NAND_ECC_SW_BCH Signed-off-by: Miquel Raynal

MIPS: generic: Add switchdev, pinctrl and fit to ocelot_defconfig

2019-04-04T18:14:45Z

Some of the configuration were not selected by default anymore, therefore enable them again. Also remove some configs which are used for MSCC Ocelot. Signed-off-by: Horatiu Vultur Signed-off-by: Paul Burton Cc: Cc: Cc: Cc: Cc: Cc:

MIPS: generic: Add Network, SPI and I2C to ocelot_defconfig

2018-10-16T06:11:15Z

Add support for the integrated switch, and the SPI and I2C controller found on MSCC Ocelot. Signed-off-by: Alexandre Belloni Signed-off-by: Paul Burton Patchwork: https://patchwork.linux-mips.org/patch/20345/ Cc: James Hogan Cc: Ralf Baechle Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org

MIPS: generic: Add support for Microsemi Ocelot

2018-03-21T23:33:10Z

Introduce support for the MIPS based Microsemi Ocelot SoCs. Signed-off-by: Alexandre Belloni Cc: Ralf Baechle Cc: Allan Nielsen Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18858/ [jhogan@kernel.org: update ocelot_defconfig specification] Signed-off-by: James Hogan

MIPS: generic: Enable crc32-mips on r6 configs

2018-02-19T20:50:36Z

Enable the crc32-mips module on MIPS generic r6 configs, where the required MIPS r6 CRC instructions may be available. As well as allowing the CRC instructions to be utilised, this should also ensure the module gets some build coverage. Signed-off-by: James Hogan Cc: Ralf Baechle Cc: Paul Burton Cc: Marcin Nowakowski Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18602/

MIPS: ranchu: Add Ranchu as a new generic-based board

2018-01-22T20:47:34Z

Provide amendments to the MIPS generic platform framework so that the new generic-based board Ranchu can be chosen to be built. The Ranchu board is intended to be used by Android emulator. The name "Ranchu" originates from Android development community. "Goldfish" and "Ranchu" are terms used for two generations of virtual boards used by Android emulator. The name "Ranchu" is a newer one among the two, and this patch deals with Ranchu. However, for historical reasons, some devices/drivers still contain the name "Goldfish". MIPS Ranchu machine includes a number of Goldfish devices. The support for Virtio devices is also included. Ranchu board supports up to 16 Virtio devices which can be attached using Virtio MMIO Bus. This is summarized in the following picture: ABUS ||----MIPS CPU || | IRQs ||----Goldfish PIC------------(32)-------- || | | | | | | | | | ||----Goldfish TTY------ | | | | | | | | || | | | | | | | | ||----Goldfish RTC-------- | | | | | | | || | | | | | | | ||----Goldfish FB----------- | | | | | | || | | | | | | ||----Goldfish Events--------- | | | | | || | | | | | ||----Goldfish Audio------------ | | | | || | | | | ||----Goldfish Battery------------ | | | || | | | ||----Android PIPE------------------ | | || | | ||----Virtio MMIO Bus | | || | | | | | || | | (virtio-block)--------- | || (16) | | || | (virtio-net)------------------ Device Tree is created on the QEMU side based on the information about devices IO map and IRQ numbers. Kernel will load this DTB using UHI boot protocol DTB handover mode. Signed-off-by: Miodrag Dinic Signed-off-by: Goran Ferenc Signed-off-by: Aleksandar Markovic Reviewed-by: James Hogan Cc: Ralf Baechle Cc: Paul Burton Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18138/ Signed-off-by: James Hogan

MIPS: generic: Add support for MIPSfpga

2017-11-08T22:53:44Z

Add support for the MIPSfpga platform to generic kernel. Signed-off-by: Zubair Lutfullah Kakakhel Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15846/ [jhogan@kernel.org: Use separate board-xilfpga.its.S. Add 32r2 and little endian requires to board-xilfpga.config] Signed-off-by: James Hogan