kernel.git/arch/mips/boot/dts, branch linux-4.5.y

regmap: mmio: Revert to v4.4 endianness handling

2016-02-05T11:22:04Z

Commit 29bb45f25ff3 (regmap-mmio: Use native endianness for read/write) attempted to fix some long standing bugs in the MMIO implementation for big endian systems caused by duplicate byte swapping in both regmap and readl()/writel() which affected MIPS systems as when they are in big endian mode they flip the endianness of all registers in the system, not just the CPU. MIPS systems had worked around this by declaring regmap using IPs as little endian which is inaccurate, unfortunately the issue had not been reported. Sadly the fix makes things worse rather than better. By changing the behaviour to match the documentation it caused behaviour changes for other IPs which broke them and by using the __raw I/O accessors to avoid the endianness swapping in readl()/writel() it removed some memory ordering guarantees and could potentially generate unvirtualisable instructions on some architectures. Unfortunately sorting out all this mess in any half way sensible fashion was far too invasive to go in during an -rc cycle so instead let's go back to the old broken behaviour for v4.5, the better fixes are already queued for v4.6. This does mean that we keep the broken MIPS DTs for another release but that seems the least bad way of handling the situation. Reported-by: Johannes Berg Signed-off-by: Mark Brown

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2016-01-24T20:50:56Z

Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.5 plus some 4.4 fixes. The executive summary: - ATH79 platform improvments, use DT bindings for the ATH79 USB PHY. - Avoid useless rebuilds for zboot. - jz4780: Add NEMC, BCH and NAND device tree nodes - Initial support for the MicroChip's DT platform. As all the device drivers are missing this is still of limited use. - Some Loongson3 cleanups. - The unavoidable whitespace polishing. - Reduce clock skew when synchronizing the CPU cycle counters on CPU startup. - Add MIPS R6 fixes. - Lots of cleanups across arch/mips as fallout from KVM. - Lots of minor fixes and changes for IEEE 754-2008 support to the FPU emulator / fp-assist software. - Minor Ralink, BCM47xx and bcm963xx platform support improvments. - Support SMP on BCM63168" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits) MIPS: zboot: Add support for serial debug using the PROM MIPS: zboot: Avoid useless rebuilds MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function MIPS: bcm963xx: Update bcm_tag field image_sequence MIPS: bcm963xx: Move extended flash address to bcm_tag header file MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure MIPS: bcm63xx: nvram: Use nvram structure definition from header file MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure MAINTAINERS: Add KVM for MIPS entry MIPS: KVM: Add missing newline to kvm_err() MIPS: Move KVM specific opcodes into asm/inst.h MIPS: KVM: Use cacheops.h definitions MIPS: Break down cacheops.h definitions MIPS: Use EXCCODE_ constants with set_except_vector() MIPS: Update trap codes MIPS: Move Cause.ExcCode trap codes to mipsregs.h MIPS: KVM: Make kvm_mips_{init,exit}() static MIPS: KVM: Refactor added offsetof()s MIPS: KVM: Convert EXPORT_SYMBOL to _GPL ...

MIPS: dts: Add initial DTS for the PIC32MZDA Starter Kit

2016-01-24T01:54:00Z

This adds basic DTS configuration for the PIC32MZDA chip and in turn the PIC32MZDA Starter Kit. Signed-off-by: Joshua Henderson Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Cc: Andrew Bresticker Cc: Paul Burton Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12104/ Signed-off-by: Ralf Baechle

MIPS: bmips: Improve BCM6368 device tree

2016-01-24T01:34:36Z

Add brcm,bcm6358-leds node to bcm6368.dtsi Add reboot support (syscon-reboot as defined in BCM6328) Signed-off-by: Álvaro Fernández Rojas Reviewed-by: Florian Fainelli Cc: f.fainelli@gmail.com Cc: jogo@openwrt.org Cc: cernekee@gmail.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: Álvaro Fernández Rojas Patchwork: https://patchwork.linux-mips.org/patch/12117/ Signed-off-by: Ralf Baechle

MIPS: bmips: Improve BCM6328 device tree

2016-01-24T01:34:26Z

Adds bcm6328-leds node to bcm6328.dtsi Signed-off-by: Álvaro Fernández Rojas Reviewed-by: Florian Fainelli Cc: jogo@openwrt.org Cc: cernekee@gmail.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: Álvaro Fernández Rojas Patchwork: https://patchwork.linux-mips.org/patch/12116/ Signed-off-by: Ralf Baechle

Merge remote-tracking branches 'regmap/topic/mmio', 'regmap/topic/rbtree' and 'regmap/topic/seq' into regmap-next

2016-01-05T19:07:18Z

MIPS: dts: jz4780/ci20: Add NEMC, BCH and NAND device tree nodes

2016-01-04T08:42:26Z

Add device tree nodes for the NEMC and BCH to the JZ4780 device tree, and make use of them in the Ci20 device tree to add a node for the board's NAND. Note that since the pinctrl driver is not yet upstream, this includes neither pin configuration nor busy/write-protect GPIO pins for the NAND. Use of the NAND relies on the boot loader to have left the pins configured in a usable state, which should be the case when booted from the NAND. [ralf@linux-mips.org: fold in Geert Uytterhoeven's patch and acks from Harvey's latest version.] Signed-off-by: Alex Smith Signed-off-by: Harvey Hunt Reviewed-by: Boris Brezillon Cc: Zubair Lutfullah Kakakhel Cc: David Woodhouse Cc: Brian Norris Cc: Paul Burton Cc: Alex Smith Cc: linux-mtd@lists.infradead.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-mtd@lists.infradead.org Patchwork: https://patchwork.linux-mips.org/patch/11695/ Patchwork: https://patchwork.linux-mips.org/patch/11914/ Patchwork: https://patchwork.linux-mips.org/patch/11985/ Signed-off-by: Ralf Baechle

MIPS: ath79: Enable the USB port on the TL-WR1043ND

2016-01-04T08:42:25Z

Signed-off-by: Alban Bedel Cc: linux-mips@linux-mips.org Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Cc: Kishon Vijay Abraham I Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11499/ Signed-off-by: Ralf Baechle

MIPS: ath79: Add the EHCI controller and USB phy to the AR9132 dtsi

2016-01-04T08:42:24Z

Signed-off-by: Alban Bedel Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Cc: Kishon Vijay Abraham I Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11498/ Signed-off-by: Ralf Baechle

MIPS: ath79: Fix the size of the MISC INTC registers in ar9132.dtsi

2015-11-20T11:14:27Z

There is 2 registers that is 8 bytes long, not 4. Signed-off-by: Alban Bedel Cc: Thomas Gleixner Cc: Jason Cooper Cc: Marc Zyngier Cc: Alexander Couzens Cc: Joel Porquet Cc: Andrew Bresticker Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11508/ Signed-off-by: Ralf Baechle