kernel.git/arch/mips/boot/dts, branch linux-4.11.y

MIPS: DTS: Add img directory to Makefile

2017-02-17T11:16:46Z

An img directory exists for the Pistchio SoC device tree but the directory itself isn't in the dts Makefile meaning the dtbs never get built. Fixes: daa10170da27 ("MIPS: DTS: img: add device tree for Marduk board") Signed-off-by: Ian Pozella Reviewed-by: Rahul Bedarkar Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15309/ Signed-off-by: James Hogan

MIPS: BMIPS: Add support SPI device nodes

2017-01-24T17:30:34Z

Adds SPI device nodes to BCM7xxx MIPS based SoCs. Signed-off-by: Jaedon Shin Reviewed-by: Florian Fainelli Cc: Kevin Cernekee Cc: Rob Herring Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14990/ Signed-off-by: Ralf Baechle

MIPS: DTS: img: add device tree for Marduk board

2017-01-03T15:34:41Z

Add support for Imagination Technologies' Marduk board which is based on Pistachio SoC. It is also known as Creator Ci40. Marduk is legacy name and will be there for decades. Documentation for this board can be found on https://docs.creatordev.io/ci40/ This patch adds initial support for board with following peripherals: * PWM based heartbeat LED * GPIO based buttons * SPI NOR flash on SPI1 * UART0 and UART1 * SD card * Ethernet * USB * PWM * ADC * I2C Signed-off-by: Rahul Bedarkar Acked-by: Rob Herring Acked-by: James Hartley Cc: Mark Rutland Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14394/ Signed-off-by: Ralf Baechle

MIPS: DTS: Add base device tree for Pistachio SoC

2017-01-03T15:34:41Z

Add support for the base Device Tree for Imagination Technologies' Pistachio SoC. This commit supports the following peripherals: * Clocks * Pinctrl and GPIO * UART * SPI * I2C * PWM * ADC * Watchdog * Ethernet * MMC * DMA engine * Crypto * I2S * SPDIF * Internal DAC * Timer * USB * IR * Interrupt Controller Signed-off-by: Rahul Bedarkar Acked-by: James Hartley Cc: Rob Herring Cc: Mark Rutland Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14393/ Signed-off-by: Ralf Baechle

MIPS: xilfpga: Add DT node for AXI emaclite

2017-01-03T15:34:40Z

The xilfpga platform has a Xilinx AXI emaclite block. Add the DT node to use it. Signed-off-by: Zubair Lutfullah Kakakhel Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14596/ Signed-off-by: Ralf Baechle

MIPS: xilfpga: Add DT node for AXI I2C

2017-01-03T15:34:39Z

The xilfpga platform has an AXI I2C Bus master with a temperature sensor connected to it. Add the device tree node to use them. Signed-off-by: Zubair Lutfullah Kakakhel Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14594/ Signed-off-by: Ralf Baechle

MIPS: xilfpga: Update DT node and specify uart irq

2017-01-03T15:34:39Z

Update the DT node with the UART irq Signed-off-by: Zubair Lutfullah Kakakhel Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14593/ Signed-off-by: Ralf Baechle

MIPS: xilfpga: Use Xilinx Interrupt Controller

2017-01-03T15:34:39Z

IRQs from peripherals such as i2c/uart/ethernet come via the AXI Interrupt controller. Select it in Kconfig for xilfpga and add the DT node Signed-off-by: Zubair Lutfullah Kakakhel Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14592/ Signed-off-by: Ralf Baechle

Merge tag 'rtc-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

2016-12-19T02:18:03Z

Pull RTC updates from Alexandre Belloni: "Subsystem: - non-modular drivers are now explicitly non-modular New driver: - Epson Toyocom rtc-7301sf/dg Drivers: - cmos: reject unsupported alarm values wrt the RTC capabilities - ds1307: ACPI support - jz4740: DT support, jz4780 handling, can now be used as a system power controller - mcp795: many fixes, in particular proper month handling - twl: driver is now DT only" * tag 'rtc-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits) rtc: mcp795: Fix whitespace and indentation. rtc: mcp795: Prefer using the BIT() macro. rtc: mcp795: fix month write resetting date to 1. rtc: mcp795: fix time range difference between linux and RTC chip. rtc: mcp795: fix bitmask value for leap year (LP). rtc: mcp795: use bcd2bin/bin2bcd. rtc: add support for EPSON TOYOCOM RTC-7301SF/DG rtc: ds1307: Add ACPI support rtc: imxdi: (trivial) fix a typo rtc: ds1374: Merge conditional + WARN_ON() rtc: twl: make driver DT only rtc: twl: kill static variables rtc: fix typos in Kconfig rtc: jz4740: make the driver builtin only rtc: jz4740: remove unused EXPORT_SYMBOL Documentation: bindings: fix twl-rtc documentation rtc: Enable compile testing for Maxim and Samsung drivers MIPS: jz4740: Remove obsolete code MIPS: qi_lb60: Probe RTC driver from DT and use it as power controller MIPS: jz4740: DTS: Probe the jz4740-rtc driver from devicetree ...

MIPS: qi_lb60: Probe RTC driver from DT and use it as power controller

2016-11-04T23:02:01Z

Since we already have a devicetree node for the jz4740-rtc driver, we don't have to probe it from platform code. Besides, using the jz4740-rtc driver as the power controller for the qi_lb60 platform allows us to remove the jz4740 platform power-off code, since this is the only jz4740-based board upstream. Signed-off-by: Paul Cercueil Acked-by: Maarten ter Huurne Signed-off-by: Alexandre Belloni