kernel.git/arch/mips/boot/compressed, branch linux-4.14.y

mips: disable branch profiling in boot/decompress.o

2021-07-20T14:17:55Z

[ Upstream commit 97e488073cfca0eea84450169ca4cbfcc64e33e3 ] Use DISABLE_BRANCH_PROFILING for arch/mips/boot/compressed/decompress.o to prevent linkage errors. mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `LZ4_decompress_fast_extDict': decompress.c:(.text+0x8c): undefined reference to `ftrace_likely_update' mips64-linux-ld: decompress.c:(.text+0xf4): undefined reference to `ftrace_likely_update' mips64-linux-ld: decompress.c:(.text+0x200): undefined reference to `ftrace_likely_update' mips64-linux-ld: decompress.c:(.text+0x230): undefined reference to `ftrace_likely_update' mips64-linux-ld: decompress.c:(.text+0x320): undefined reference to `ftrace_likely_update' mips64-linux-ld: arch/mips/boot/compressed/decompress.o:decompress.c:(.text+0x3f4): more undefined references to `ftrace_likely_update' follow Fixes: e76e1fdfa8f8 ("lib: add support for LZ4-compressed kernel") Reported-by: kernel test robot Signed-off-by: Randy Dunlap Cc: Thomas Bogendoerfer Cc: linux-mips@vger.kernel.org Cc: Kyungsik Lee Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin

mips: always link byteswap helpers into decompressor

2021-07-20T14:17:55Z

[ Upstream commit cddc40f5617e53f97ef019d5b29c1bd6cbb031ec ] My series to clean up the unaligned access implementation across architectures caused some mips randconfig builds to fail with: mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `decompress_kernel': decompress.c:(.text.decompress_kernel+0x54): undefined reference to `__bswapsi2' It turns out that this problem has already been fixed for the XZ decompressor but now it also shows up in (at least) LZO and LZ4. From my analysis I concluded that the compiler could always have emitted those calls, but the different implementation allowed it to make otherwise better decisions about not inlining the byteswap, which results in the link error when the out-of-line code is missing. While it could be addressed by adding it to the two decompressor implementations that are known to be affected, but as this only adds 112 bytes to the kernel, the safer choice is to always add them. Fixes: c50ec6787536 ("MIPS: zboot: Fix the build with XZ compression on older GCC versions") Fixes: 0652035a5794 ("asm-generic: unaligned: remove byteshift helpers") Link: https://lore.kernel.org/linux-mm/202106301304.gz2wVY9w-lkp@intel.com/ Link: https://lore.kernel.org/linux-mm/202106260659.TyMe8mjr-lkp@intel.com/ Link: https://lore.kernel.org/linux-mm/202106172016.onWT6Tza-lkp@intel.com/ Link: https://lore.kernel.org/linux-mm/202105231743.JJcALnhS-lkp@intel.com/ Signed-off-by: Arnd Bergmann Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin

MIPS: boot: Fix unaligned access with CONFIG_MIPS_RAW_APPENDED_DTB

2021-01-23T14:48:40Z

commit 4d4f9c1a17a3480f8fe523673f7232b254d724b7 upstream. The compressed payload is not necesarily 4-byte aligned, at least when compiling with Clang. In that case, the 4-byte value appended to the compressed payload that corresponds to the uncompressed kernel image size must be read using get_unaligned_le32(). This fixes Clang-built kernels not booting on MIPS (tested on a Ingenic JZ4770 board). Fixes: b8f54f2cde78 ("MIPS: ZBOOT: copy appended dtb to the end of the kernel") Cc: # v4.7 Signed-off-by: Paul Cercueil Reviewed-by: Nick Desaulniers Reviewed-by: Philippe Mathieu-Daudé Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman

MIPS: Truncate link address into 32bit for 32bit kernel

2020-06-20T08:25:11Z

[ Upstream commit ff487d41036035376e47972c7c522490b839ab37 ] LLD failed to link vmlinux with 64bit load address for 32bit ELF while bfd will strip 64bit address into 32bit silently. To fix LLD build, we should truncate load address provided by platform into 32bit for 32bit kernel. Signed-off-by: Jiaxun Yang Link: https://github.com/ClangBuiltLinux/linux/issues/786 Link: https://sourceware.org/bugzilla/show_bug.cgi?id=25784 Reviewed-by: Fangrui Song Reviewed-by: Kees Cook Tested-by: Nathan Chancellor Cc: Maciej W. Rozycki Tested-by: Nick Desaulniers Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin

MIPS: Prevent link failure with kcov instrumentation

2020-01-17T18:45:54Z

[ Upstream commit a4a3893114a41e365274d5fab5d9ff5acc235ff0 ] __sanitizer_cov_trace_pc() is not linked in and causing link failure if KCOV_INSTRUMENT is enabled. Fix this by disabling instrumentation for compressed image. Signed-off-by: Jouni Hogander Signed-off-by: Paul Burton Cc: Lukas Bulwahn Cc: linux-mips@vger.kernel.org Signed-off-by: Sasha Levin

MIPS: fix build on non-linux hosts

2019-07-31T05:28:18Z

[ Upstream commit 1196364f21ffe5d1e6d83cafd6a2edb89404a3ae ] calc_vmlinuz_load_addr.c requires SZ_64K to be defined for alignment purposes. It included "../../../../include/linux/sizes.h" to define that size, however "sizes.h" tries to include which assumes linux system headers. These may not exist eg. the following error was encountered when building Linux for OpenWrt under macOS: In file included from arch/mips/boot/compressed/calc_vmlinuz_load_addr.c:16: arch/mips/boot/compressed/../../../../include/linux/sizes.h:11:10: fatal error: 'linux/const.h' file not found ^~~~~~~~~~ Change makefile to force building on local linux headers instead of system headers. Also change eye-watering relative reference in include file spec. Thanks to Jo-Philip Wich & Petr Štetiar for assistance in tracking this down & fixing. Suggested-by: Jo-Philipp Wich Signed-off-by: Petr Štetiar Signed-off-by: Kevin Darbyshire-Bryant Signed-off-by: Paul Burton Cc: linux-mips@vger.kernel.org Signed-off-by: Sasha Levin

MIPS: Align kernel load address to 64KB

2019-01-09T16:14:52Z

commit bec0de4cfad21bd284dbddee016ed1767a5d2823 upstream. KEXEC needs the new kernel's load address to be aligned on a page boundary (see sanity_check_segment_list()), but on MIPS the default vmlinuz load address is only explicitly aligned to 16 bytes. Since the largest PAGE_SIZE supported by MIPS kernels is 64KB, increase the alignment calculated by calc_vmlinuz_load_addr to 64KB. Signed-off-by: Huacai Chen Signed-off-by: Paul Burton Patchwork: https://patchwork.linux-mips.org/patch/21131/ Cc: Ralf Baechle Cc: James Hogan Cc: Steven J . Hill Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang Cc: Zhangjin Wu Cc: # 2.6.36+ Signed-off-by: Greg Kroah-Hartman

MIPS: Fix clean of vmlinuz.{32,ecoff,bin,srec}

2018-04-26T09:02:08Z

[ Upstream commit 5f2483eb2423152445b39f2db59d372f523e664e ] Make doesn't expand shell style "vmlinuz.{32,ecoff,bin,srec}" to the 4 separate files, so none of these files get cleaned up by make clean. List the files separately instead. Fixes: ec3352925b74 ("MIPS: Remove all generated vmlinuz* files on "make clean"") Signed-off-by: James Hogan Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18491/ Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

MIPS: gitignore: ignore generated .c files

2017-08-07T09:57:30Z

Add ashldi3.c and bswapsi.c to the list of ignored files. Signed-off-by: Bartosz Golaszewski Reviewed-by: James Hogan Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16905/ Signed-off-by: Ralf Baechle