kernel.git/arch/mips/ar7/platform.c, branch linux-3.2.y

MIPS: AR7: Ensure that serial ports are properly set up

2018-01-01T20:51:03Z

commit b084116f8587b222a2c5ef6dcd846f40f24b9420 upstream. Without UPF_FIXED_TYPE, the data from the PORT_AR7 uart_config entry is never copied, resulting in a dead port. Fixes: 154615d55459 ("MIPS: AR7: Use correct UART port type") Signed-off-by: Oswald Buddenhagen [jonas.gorski: add Fixes tag] Signed-off-by: Jonas Gorski Reviewed-by: Florian Fainelli Cc: Ralf Baechle Cc: Greg Kroah-Hartman Cc: Yoshihiro YUNOMAE Cc: Nicolas Schichan Cc: Oswald Buddenhagen Cc: linux-mips@linux-mips.org Cc: linux-serial@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17543/ Signed-off-by: James Hogan Signed-off-by: Ben Hutchings

MIPS: AR7: Remove 'space before tabs' in platform.c

2011-07-25T16:22:49Z

Signed-off-by: Florian Fainelli To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2490/ Signed-off-by: Ralf Baechle

MIPS: AR7: Add support for Titan (TNETV10xx) SoC variant

2010-10-29T18:08:46Z

Add support for Titan TNETV1050,1055,1056,1060 variants. This SoC is almost completely identical to AR7 except on a few points: - a second bank of gpios is available - vlynq0 on titan is vlynq1 on ar7 - different PHY addresses for cpmac0 This SoC can be found on commercial products like the Linksys WRTP54G Original patch by Xin with improvments by Florian. Signed-off-by: Xin Zhen Signed-off-by: Florian Fainelli Patchwork: http://patchwork.linux-mips.org/patch/1563/ Signed-off-by: Ralf Baechle ---

MIPS: AR7: rewrite of cpmac_get_mac()

2010-08-05T12:26:02Z

Shamelessly stealing wisdom from pasemi_mac.c, I found char2hex() could be replaced with a single call to sscanf(), looks cleaner to me at least. The result is 100 bytes trimmed off the size of a compiled cpmac_get_mac() and as an extra bonus it grumbles and gracefully fails over to using random_ether_addr() when an attempt to parse an invalid MAC address is made. Signed-off-by: Alexander Clouter To: linux-mips@linux-mips.org Cc: florian@openwrt.org Signed-off-by: Ralf Baechle

MIPS: AR7: Use correct UART port type

2010-07-05T16:17:17Z

PORT_AR7 has the correct TRIG flag (UART_FCR_R_TRIG_00) as well as UART_CAP_AFE being set. This fixes UART on TNETD7300 revision 0x02, which would otherwise mangle some characters, no side effects on other revisions. Signed-off-by: Florian Fainelli To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1246/ Signed-off-by: Ralf Baechle

MIPS: AR7: prevent race between clock initialization and devices registration

2010-05-21T20:31:22Z

ar7_regiser_devices needs ar7_clocks_init to have been called first, however clock.o is currently linked later due to its order in the Makefile, therefore ar7_clocks_init always gets called later than ar7_register_devices because both have the same initcall level. Fix this by moving ar7_register_devices to the right initcall level. Reported-by: Michael J. Evans Signed-off-by: Florian Fainelli To: linux-mips@linux-mips.org Cc: Ralf Baechle Patchwork: http://patchwork.linux-mips.org/patch/1212/ Signed-off-by: Ralf Baechle

MIPS: AR7: use ar7_has_high_vlynq() to determine watchdog base address

2010-05-21T20:31:22Z

Instead of doing yet another switch/case on the chip_id, use existing inline function to set the watchdog base address. Signed-off-by: Florian Fainelli To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1211/ Signed-off-by: Ralf Baechle

MIPS: AR7: Fix phat finger of cpmac fixed_phy_add

2010-04-12T16:26:13Z

Seems I trimmed one too many lines in 29ca2d81bd2a62fa86bc9a72ddadcf03d7daf795 (lmo) rsp 7084338eb8eb0cc021ba86c340157bad397f3f0b (kernel.org) which led to no functioning Ethernet on my WAG54Gv2. This patch restores the AWOL line. Signed-off-by: Alexander Clouter To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1065/ Signed-off-by: Ralf Baechle

MIPS: AR7: Fix phat finger of reset bit in vlynq_high_data

2010-04-12T16:26:13Z

Seems in my whitespace cleanup 0f2536082d01448daeced8d9e82c3ba1751fefa3 (lmo) rsp. 8c2961da46abd85a71d20f2b169bf80618e (kernel.org) caused AR7 to no longer get as far as init. Fixed my phat fingering. Signed-off-by: Alexander Clouter To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1064/ Signed-off-by: Ralf Baechle

MIPS: AR7: Make ar7_register_devices much more durable

2010-02-27T11:53:22Z

[Ralf: Fixed up the rejects and changed all the new printk(KERN_...); to pr_xxx() as suggested by Wu.] Signed-off-by: Alexander Clouter To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/920/ Signed-off-by: Ralf Baechle