kernel.git/arch/mips/alchemy, branch linux-6.10.y

MIPS: Alchemy: Use kcalloc() instead of kzalloc()

2024-02-20T12:36:34Z

As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, use the purpose specific kcalloc() function instead of the argument size * count in the kzalloc() function. Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1] Link: https://github.com/KSPP/linux/issues/162 Signed-off-by: Erick Archer Reviewed-by: Gustavo A. R. Silva Signed-off-by: Thomas Bogendoerfer

MIPS: Alchemy: Fix missing prototypes

2024-01-22T09:32:36Z

We have a number of missing prototypes warnings for board_setup(), alchemy_set_lpj() and prom_init_cmdline(), prom_getenv() and prom_get_ethernet_addr(). Fix those by providing definitions for the first two functions in au1000.h which is included everywhere relevant, and including prom.h for the last three. Signed-off-by: Florian Fainelli Signed-off-by: Thomas Bogendoerfer

MIPS: Alchemy: Fix an out-of-bound access in db1550_dev_setup()

2024-01-11T11:50:30Z

When calling spi_register_board_info(), Fixes: f869d42e580f ("MIPS: Alchemy: Improved DB1550 support, with audio and serial busses.") Signed-off-by: Christophe JAILLET Signed-off-by: Thomas Bogendoerfer

MIPS: Alchemy: Fix an out-of-bound access in db1200_dev_setup()

2024-01-11T11:50:25Z

When calling spi_register_board_info(), we should pass the number of elements in 'db1200_spi_devs', not 'db1200_i2c_devs'. Fixes: 63323ec54a7e ("MIPS: Alchemy: Extended DB1200 board support.") Signed-off-by: Christophe JAILLET Signed-off-by: Thomas Bogendoerfer

MIPS: Alchemy: only build mmc support helpers if au1xmmc is enabled

2023-09-25T09:43:55Z

While commit d4a5c59a955b ("mmc: au1xmmc: force non-modular build and remove symbol_get usage") to be built in, it can still build a kernel without MMC support and thuse no mmc_detect_change symbol at all. Add ifdefs to build the mmc support code in the alchemy arch code conditional on mmc support. Fixes: d4a5c59a955b ("mmc: au1xmmc: force non-modular build and remove symbol_get usage") Reported-by: kernel test robot Signed-off-by: Christoph Hellwig Acked-by: Randy Dunlap Tested-by: Randy Dunlap # build-tested Signed-off-by: Thomas Bogendoerfer

mmc: au1xmmc: force non-modular build and remove symbol_get usage

2023-08-02T18:17:35Z

au1xmmc is split somewhat awkwardly into the main mmc subsystem driver, and callbacks in platform_data that sit under arch/mips/ and are always built in. The latter than call mmc_detect_change through symbol_get. Remove the use of symbol_get by requiring the driver to be built in. In the future the interrupt handlers for card insert/eject detection should probably be moved into the main driver, and which point it can be built modular again. Signed-off-by: Christoph Hellwig Acked-by: Manuel Lauss Reviewed-by: Arnd Bergmann [mcgrof: squashed in depends on MMC=y suggested by Arnd] Signed-off-by: Luis Chamberlain

Merge tag 'tty-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2023-07-03T20:14:58Z

Pull tty/serial driver updates from Greg KH: "Here is the big set of tty/serial driver updates for 6.5-rc1. Included in here are: - tty_audit code cleanups from Jiri - more 8250 cleanups from Ilpo - samsung_tty driver bugfixes - 8250 lock port updates - usual fsl_lpuart driver updates and fixes - other small serial driver fixes and updates, full details in the shortlog All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits) tty_audit: make data of tty_audit_log() const tty_audit: make tty pointers in exposed functions const tty_audit: make icanon a bool tty_audit: invert the condition in tty_audit_log() tty_audit: use kzalloc() in tty_audit_buf_alloc() tty_audit: use TASK_COMM_LEN for task comm Revert "8250: add support for ASIX devices with a FIFO bug" serial: atmel: don't enable IRQs prematurely tty: serial: Add Nuvoton ma35d1 serial driver support tty: serial: fsl_lpuart: add earlycon for imx8ulp platform tty: serial: imx: fix rs485 rx after tx selftests: tty: add selftest for tty timestamp updates tty: tty_io: update timestamps on all device nodes tty: fix hang on tty device with no_room set serial: core: fix -EPROBE_DEFER handling in init serial: 8250_omap: Use force_suspend and resume for system suspend tty: serial: samsung_tty: Use abs() to simplify some code tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clk tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in case of error serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLE ...

Merge tag 'mips_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2023-06-29T22:01:51Z

Pull MIPS updates from Thomas Bogendoerfer: - add support for TP-Link HC220 G5 v1 - add support for Wifi/Bluetooth on CI20 - rework Ralink clock and reset handling - cleanups and fixes * tag 'mips_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (58 commits) MIPS: Loongson64: DTS: Add RTC support to Loongson-2K1000 MIPS: Loongson64: DTS: Add RTC support to LS7A PCH MIPS: OCTEON: octeon-usb: cleanup divider calculation MIPS: OCTEON: octeon-usb: introduce dwc3_octeon_{read,write}q MIPS: OCTEON: octeon-usb: move gpio config to separate function MIPS: OCTEON: octeon-usb: use bitfields for shim register MIPS: OCTEON: octeon-usb: use bitfields for host config register MIPS: OCTEON: octeon-usb: use bitfields for control register MIPS: OCTEON: octeon-usb: add all register offsets mips: ralink: match all supported system controller compatible strings MIPS: dec: prom: Address -Warray-bounds warning MIPS: DTS: CI20: Raise VDDCORE voltage to 1.125 volts clk: ralink: mtmips: Fix uninitialized use of ret in mtmips_register_{fixed,factor}_clocks() mips: ralink: introduce commonly used remap node function mips: pci-mt7620: use dev_info() to log PCIe device detection result mips: pci-mt7620: do not print NFTS register value as error log MAINTAINERS: add Mediatek MTMIPS Clock maintainer mips: ralink: get cpu rate from new driver code mips: ralink: remove reset related code mips: ralink: mt7620: remove clock related code ...

Merge tag 'gpio-updates-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

2023-06-29T17:11:10Z

Pull gpio updates from Bartosz Golaszewski: "We have two new drivers, some improvements to the core code, lots of different updates to existing GPIO drivers and some dt-bindings on top. There's nothing controversial in here and almost everything has been in next for more than a week (95% a lot longer than this). The only thing that has spent less time in next is a new driver so no risk of regressions. The single merge pulls in changes that remove all usage of global GPIO numbers from arch/arm/mach-omap. Core GPIO library: - remove unused symbols - don't spam the kernel log with messages about hogs - remove old sysfs API cruft - improve handling of GPIO masks New drivers: - add a driver for the BlueField-3 GPIO controller - add GPIO support for the TPS65219 PMIC Driver improvements: - extend the gpio-aggregator driver to support ramp-up/ramp-down delay - remove unnecessary CONFIG_OF guards from gpio-aggregator - readability improvements in gpio-tangier - switch i2c drivers back to using probe() now that it's been converted in the i2c subsystem to not taking the id parameter - remove unused inclusions of of_gpio.h in several drivers - make pm ops static in gpio-davinci and fix a comment - use more devres in drivers to shrink and simplify the code - add missing include in gpio-sa1100 - add HAS_IOPORT KConfig dependency where needed - add permissions checks before accessing pins in gpio-tegra186 - convert the gpio-zynq driver to using immutable irqchips - preserve output settings set by the bootloader in gpio-mpc8xxx Selftests: - tweak the variable naming in script tests Device tree updates: - convert gpio-mmio and gpio-stmpe to YAML - add parsing of GPIO hogs to gpio-vf610 - add bindings for the Cirrus EP93xx GPIO controller - add gpio-line-names property to the gpio-pca9570 bindings - extend the binding for x-powers,axp209 with another block" * tag 'gpio-updates-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (58 commits) of: unittest: drop assertions for GPIO hog messages gpiolib: Drop unused domain_ops memeber of GPIO IRQ chip gpio: synq: remove unused zynq_gpio_irq_reqres/zynq_gpio_irq_relres dt-bindings: gpio: gpio-vf610: Add parsing of hogs gpio: lpc18xx: Remove unused of_gpio.h inclusion gpio: xra1403: Remove unused of_gpio.h inclusion gpio: mpc8xxx: Remove unused of_gpio.h inclusion dt-bindings: gpio: Add Cirrus EP93xx gpio: mpc8xxx: latch GPIOs state on module load when configured as output selftests: gpio: gpio-sim: Use same variable name for sysfs pathname gpio: mlxbf3: Add gpio driver support gpio: delay: Remove duplicative functionality gpio: aggregator: Set up a parser of delay line parameters gpio: aggregator: Support delay for setting up individual GPIOs gpio: aggregator: Remove CONFIG_OF and of_match_ptr() protections dt-bindings: gpio: pca9570: add gpio-line-names property gpiolib: remove unused gpio_cansleep() gpio: tps65219: add GPIO support for TPS65219 PMIC gpio: zynq: fix zynqmp_gpio not an immutable chip warning gpio: davinci: make davinci_gpio_dev_pm_ops static ...

MIPS: Alchemy: Enable PATA_PLATFORM support

2023-06-09T07:53:11Z

We have limited demand for platform PATA support across MIPS platforms: $ find arch/mips -type f | sort | xargs grep -l pata_platform_info arch/mips/alchemy/devboards/db1200.c arch/mips/alchemy/devboards/db1300.c arch/mips/sibyte/swarm/platform.c $ certainly not high enough to justify enabling support for PATA_PLATFORM port-wide. SiByte platforms are handled selectively already, so just make a similar arrangement for Alchemy DB1XXX platforms. Signed-off-by: Maciej W. Rozycki Signed-off-by: Thomas Bogendoerfer