<feed xmlns='http://www.w3.org/2005/Atom'>
<title>kernel.git/arch/m68k/mac, branch linux-5.8.y</title>
<subtitle>Hosts the 0x221E linux distro kernel.
</subtitle>
<id>https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-5.8.y</id>
<link rel='self' href='https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-5.8.y'/>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/'/>
<updated>2020-08-19T06:26:08Z</updated>
<entry>
<title>m68k: mac: Fix IOP status/control register writes</title>
<updated>2020-08-19T06:26:08Z</updated>
<author>
<name>Finn Thain</name>
</author>
<published>2020-05-30T23:12:13Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=40bd5e36e27e3419aba2265167f74df7c9f9154b'/>
<id>urn:sha1:40bd5e36e27e3419aba2265167f74df7c9f9154b</id>
<content type='text'>
[ Upstream commit 931fc82a6aaf4e2e4a5490addaa6a090d78c24a7 ]

When writing values to the IOP status/control register make sure those
values do not have any extraneous bits that will clear interrupt flags.

To place the SCC IOP into bypass mode would be desirable but this is not
achieved by writing IOP_DMAINACTIVE | IOP_RUN | IOP_AUTOINC | IOP_BYPASS
to the control register. Drop this ineffective register write.

Remove the flawed and unused iop_bypass() function. Make use of the
unused iop_stop() function.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain &lt;fthain@telegraphics.com.au&gt;
Tested-by: Stan Johnson &lt;userm57@yahoo.com&gt;
Cc: Joshua Thompson &lt;funaho@jurai.org&gt;
Link: https://lore.kernel.org/r/09bcb7359a1719a18b551ee515da3c4c3cf709e6.1590880333.git.fthain@telegraphics.com.au
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
</entry>
<entry>
<title>m68k: mac: Don't send IOP message until channel is idle</title>
<updated>2020-08-19T06:26:07Z</updated>
<author>
<name>Finn Thain</name>
</author>
<published>2020-05-30T23:12:13Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=6b4132d29576d76506600f04aeb1090304ac33ab'/>
<id>urn:sha1:6b4132d29576d76506600f04aeb1090304ac33ab</id>
<content type='text'>
[ Upstream commit aeb445bf2194d83e12e85bf5c65baaf1f093bd8f ]

In the following sequence of calls, iop_do_send() gets called when the
"send" channel is not in the IOP_MSG_IDLE state:

	iop_ism_irq()
		iop_handle_send()
			(msg-&gt;handler)()
				iop_send_message()
			iop_do_send()

Avoid this by testing the channel state before calling iop_do_send().

When sending, and iop_send_queue is empty, call iop_do_send() because
the channel is idle. If iop_send_queue is not empty, iop_do_send() will
get called later by iop_handle_send().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain &lt;fthain@telegraphics.com.au&gt;
Tested-by: Stan Johnson &lt;userm57@yahoo.com&gt;
Cc: Joshua Thompson &lt;funaho@jurai.org&gt;
Link: https://lore.kernel.org/r/6d667c39e53865661fa5a48f16829d18ed8abe54.1590880333.git.fthain@telegraphics.com.au
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
</entry>
<entry>
<title>mm: don't include asm/pgtable.h if linux/mm.h is already included</title>
<updated>2020-06-09T16:39:13Z</updated>
<author>
<name>Mike Rapoport</name>
</author>
<published>2020-06-09T04:32:33Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=e31cf2f4ca422ac9b14ecc4a1295b8977a20f812'/>
<id>urn:sha1:e31cf2f4ca422ac9b14ecc4a1295b8977a20f812</id>
<content type='text'>
Patch series "mm: consolidate definitions of page table accessors", v2.

The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once.  For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.

Most of these definitions are actually identical and typically it boils
down to, e.g.

static inline unsigned long pmd_index(unsigned long address)
{
        return (address &gt;&gt; PMD_SHIFT) &amp; (PTRS_PER_PMD - 1);
}

static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
        return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}

These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.

For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.

These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.

This patch (of 12):

The linux/mm.h header includes &lt;asm/pgtable.h&gt; to allow inlining of the
functions involving page table manipulations, e.g.  pte_alloc() and
pmd_alloc().  So, there is no point to explicitly include &lt;asm/pgtable.h&gt;
in the files that include &lt;linux/mm.h&gt;.

The include statements in such cases are remove with a simple loop:

	for f in $(git grep -l "include &lt;linux/mm.h&gt;") ; do
		sed -i -e '/include &lt;asm\/pgtable.h&gt;/ d' $f
	done

Signed-off-by: Mike Rapoport &lt;rppt@linux.ibm.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Cc: Arnd Bergmann &lt;arnd@arndb.de&gt;
Cc: Borislav Petkov &lt;bp@alien8.de&gt;
Cc: Brian Cain &lt;bcain@codeaurora.org&gt;
Cc: Catalin Marinas &lt;catalin.marinas@arm.com&gt;
Cc: Chris Zankel &lt;chris@zankel.net&gt;
Cc: "David S. Miller" &lt;davem@davemloft.net&gt;
Cc: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Cc: Greentime Hu &lt;green.hu@gmail.com&gt;
Cc: Greg Ungerer &lt;gerg@linux-m68k.org&gt;
Cc: Guan Xuetao &lt;gxt@pku.edu.cn&gt;
Cc: Guo Ren &lt;guoren@kernel.org&gt;
Cc: Heiko Carstens &lt;heiko.carstens@de.ibm.com&gt;
Cc: Helge Deller &lt;deller@gmx.de&gt;
Cc: Ingo Molnar &lt;mingo@redhat.com&gt;
Cc: Ley Foon Tan &lt;ley.foon.tan@intel.com&gt;
Cc: Mark Salter &lt;msalter@redhat.com&gt;
Cc: Matthew Wilcox &lt;willy@infradead.org&gt;
Cc: Matt Turner &lt;mattst88@gmail.com&gt;
Cc: Max Filippov &lt;jcmvbkbc@gmail.com&gt;
Cc: Michael Ellerman &lt;mpe@ellerman.id.au&gt;
Cc: Michal Simek &lt;monstr@monstr.eu&gt;
Cc: Mike Rapoport &lt;rppt@kernel.org&gt;
Cc: Nick Hu &lt;nickhu@andestech.com&gt;
Cc: Paul Walmsley &lt;paul.walmsley@sifive.com&gt;
Cc: Richard Weinberger &lt;richard@nod.at&gt;
Cc: Rich Felker &lt;dalias@libc.org&gt;
Cc: Russell King &lt;linux@armlinux.org.uk&gt;
Cc: Stafford Horne &lt;shorne@gmail.com&gt;
Cc: Thomas Bogendoerfer &lt;tsbogend@alpha.franken.de&gt;
Cc: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Cc: Tony Luck &lt;tony.luck@intel.com&gt;
Cc: Vincent Chen &lt;deanbo422@gmail.com&gt;
Cc: Vineet Gupta &lt;vgupta@synopsys.com&gt;
Cc: Will Deacon &lt;will@kernel.org&gt;
Cc: Yoshinori Sato &lt;ysato@users.sourceforge.jp&gt;
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
</entry>
<entry>
<title>m68k: mac: Avoid stuck ISM IOP interrupt on Quadra 900/950</title>
<updated>2020-05-25T08:55:56Z</updated>
<author>
<name>Finn Thain</name>
</author>
<published>2020-05-20T04:32:02Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=b2003c7a811c765f18d1495c01251c20f9e6c93a'/>
<id>urn:sha1:b2003c7a811c765f18d1495c01251c20f9e6c93a</id>
<content type='text'>
On a Quadra 900/950, the ISM IOP IRQ output pin is connected to an
edge-triggered input on VIA2. It is theoretically possible that this
signal could fail to produce the expected VIA2 interrupt.

The two IOP interrupt flags can be asserted in any order but the logic
in iop_ism_irq() does not allow for that. In particular, INT0 can be
asserted right after INT0 is checked and before INT1 is cleared.

Such an interrupt would produce no new edge and VIA2 would detect no
further interrupts from the IOP. Avoid this by looping over the INT0/1
handlers so an edge can be produced.

Signed-off-by: Finn Thain &lt;fthain@telegraphics.com.au&gt;
Tested-by: Stan Johnson &lt;userm57@yahoo.com&gt;
Cc: Joshua Thompson &lt;funaho@jurai.org&gt;
Link: https://lore.kernel.org/r/bfbb71db52c5e162d3afa25a28fc5d535ca87138.1589949122.git.fthain@telegraphics.com.au
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
</content>
</entry>
<entry>
<title>m68k: mac: Remove misleading comment</title>
<updated>2020-05-25T08:55:56Z</updated>
<author>
<name>Finn Thain</name>
</author>
<published>2020-05-20T04:32:02Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=bf6c68ead314bd2339aea84d77bacada03df757a'/>
<id>urn:sha1:bf6c68ead314bd2339aea84d77bacada03df757a</id>
<content type='text'>
This code path was tested on a Quadra 950 a long time ago and the
comment isn't needed.

Signed-off-by: Finn Thain &lt;fthain@telegraphics.com.au&gt;
Cc: Joshua Thompson &lt;funaho@jurai.org&gt;
Link: https://lore.kernel.org/r/10dff3e7c17d363a4b239aae7b3ebab32bef3547.1589949122.git.fthain@telegraphics.com.au
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
</content>
</entry>
<entry>
<title>m68k: mac: Don't call via_flush_cache() on Mac IIfx</title>
<updated>2020-05-25T08:55:56Z</updated>
<author>
<name>Finn Thain</name>
</author>
<published>2020-05-20T04:32:02Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=bcc44f6b74106b31f0b0408b70305a40360d63b7'/>
<id>urn:sha1:bcc44f6b74106b31f0b0408b70305a40360d63b7</id>
<content type='text'>
There is no VIA2 chip on the Mac IIfx, so don't call via_flush_cache().
This avoids a boot crash which appeared in v5.4.

printk: console [ttyS0] enabled
printk: bootconsole [debug0] disabled
printk: bootconsole [debug0] disabled
Calibrating delay loop... 9.61 BogoMIPS (lpj=48064)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
devtmpfs: initialized
random: get_random_u32 called from bucket_table_alloc.isra.27+0x68/0x194 with crng_init=0
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes, linear)
NET: Registered protocol family 16
Data read fault at 0x00000000 in Super Data (pc=0x8a6a)
BAD KERNEL BUSERR
Oops: 00000000
Modules linked in:
PC: [&lt;00008a6a&gt;] via_flush_cache+0x12/0x2c
SR: 2700  SP: 01c1fe3c  a2: 01c24000
d0: 00001119    d1: 0000000c    d2: 00012000    d3: 0000000f
d4: 01c06840    d5: 00033b92    a0: 00000000    a1: 00000000
Process swapper (pid: 1, task=01c24000)
Frame format=B ssw=0755 isc=0200 isb=fff7 daddr=00000000 dobuf=01c1fed0
baddr=00008a6e dibuf=0000004e ver=f
Stack from 01c1fec4:
        01c1fed0 00007d7e 00010080 01c1fedc 0000792e 00000001 01c1fef4 00006b40
        01c80000 00040000 00000006 00000003 01c1ff1c 004a545e 004ff200 00040000
        00000000 00000003 01c06840 00033b92 004a5410 004b6c88 01c1ff84 000021e2
        00000073 00000003 01c06840 00033b92 0038507a 004bb094 004b6ca8 004b6c88
        004b6ca4 004b6c88 000021ae 00020002 00000000 01c0685d 00000000 01c1ffb4
        0049f938 00409c85 01c06840 0045bd40 00000073 00000002 00000002 00000000
Call Trace: [&lt;00007d7e&gt;] mac_cache_card_flush+0x12/0x1c
 [&lt;00010080&gt;] fix_dnrm+0x2/0x18
 [&lt;0000792e&gt;] cache_push+0x46/0x5a
 [&lt;00006b40&gt;] arch_dma_prep_coherent+0x60/0x6e
 [&lt;00040000&gt;] switched_to_dl+0x76/0xd0
 [&lt;004a545e&gt;] dma_atomic_pool_init+0x4e/0x188
 [&lt;00040000&gt;] switched_to_dl+0x76/0xd0
 [&lt;00033b92&gt;] parse_args+0x0/0x370
 [&lt;004a5410&gt;] dma_atomic_pool_init+0x0/0x188
 [&lt;000021e2&gt;] do_one_initcall+0x34/0x1be
 [&lt;00033b92&gt;] parse_args+0x0/0x370
 [&lt;0038507a&gt;] strcpy+0x0/0x1e
 [&lt;000021ae&gt;] do_one_initcall+0x0/0x1be
 [&lt;00020002&gt;] do_proc_dointvec_conv+0x54/0x74
 [&lt;0049f938&gt;] kernel_init_freeable+0x126/0x190
 [&lt;0049f94c&gt;] kernel_init_freeable+0x13a/0x190
 [&lt;004a5410&gt;] dma_atomic_pool_init+0x0/0x188
 [&lt;00041798&gt;] complete+0x0/0x3c
 [&lt;000b9b0c&gt;] kfree+0x0/0x20a
 [&lt;0038df98&gt;] schedule+0x0/0xd0
 [&lt;0038d604&gt;] kernel_init+0x0/0xda
 [&lt;0038d610&gt;] kernel_init+0xc/0xda
 [&lt;0038d604&gt;] kernel_init+0x0/0xda
 [&lt;00002d38&gt;] ret_from_kernel_thread+0xc/0x14
Code: 0000 2079 0048 10da 2279 0048 10c8 d3c8 &lt;1011&gt; 0200 fff7 1280 d1f9 0048 10c8 1010 0000 0008 1080 4e5e 4e75 4e56 0000 2039
Disabling lock debugging due to kernel taint
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

Thanks to Stan Johnson for capturing the console log and running git
bisect.

Git bisect said commit 8e3a68fb55e0 ("dma-mapping: make
dma_atomic_pool_init self-contained") is the first "bad" commit. I don't
know why. Perhaps mach_l2_flush first became reachable with that commit.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: Stan Johnson &lt;userm57@yahoo.com&gt;
Signed-off-by: Finn Thain &lt;fthain@telegraphics.com.au&gt;
Cc: Joshua Thompson &lt;funaho@jurai.org&gt;
Link: https://lore.kernel.org/r/b8bbeef197d6b3898e82ed0d231ad08f575a4b34.1589949122.git.fthain@telegraphics.com.au
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
</content>
</entry>
<entry>
<title>m68k: mac: Revisit floppy disc controller base addresses</title>
<updated>2019-08-19T11:24:10Z</updated>
<author>
<name>Finn Thain</name>
</author>
<published>2019-07-08T09:31:22Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=aee6bff1c325d7a8b317a0e6d3441799ff8ac8ce'/>
<id>urn:sha1:aee6bff1c325d7a8b317a0e6d3441799ff8ac8ce</id>
<content type='text'>
Rename floppy_type macros to make them more consistent with the scsi_type
macros, which are named after classes of models with similar memory maps.

The MAC_FLOPPY_OLD symbol is introduced to change the relevant base
address from 0x50F00000 to 0x50000000 (consistent with MAC_SCSI_OLD).

The documentation for LC-class machines has the IO devices at offsets
from $50F00000. Use these addresses for MAC_FLOPPY_LC (consistent with
MAC_SCSI_LC) because they may not be aliased elsewhere in the memory map.

Add comments with controller type information from 'Designing Cards and
Drivers for the Macintosh Family', relevant Developer Notes and
http://mess.redump.net/mess/driver_info/mac_technical_notes

Adopt phys_addr_t to avoid type casts.

Signed-off-by: Finn Thain &lt;fthain@telegraphics.com.au&gt;
Tested-by: Stan Johnson &lt;userm57@yahoo.com&gt;
Acked-by: Laurent Vivier &lt;lvivier@redhat.com&gt;
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
</content>
</entry>
<entry>
<title>Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi</title>
<updated>2019-07-11T22:14:01Z</updated>
<author>
<name>Linus Torvalds</name>
</author>
<published>2019-07-11T22:14:01Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=ba6d10ab8014ac10d25ca513352b6665e73b5785'/>
<id>urn:sha1:ba6d10ab8014ac10d25ca513352b6665e73b5785</id>
<content type='text'>
Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs,
  mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the
  removal of the osst driver (I heard from Willem privately that he
  would like the driver removed because all his test hardware has
  failed). Plus number of minor changes, spelling fixes and other
  trivia.

  The big merge conflict this time around is the SPDX licence tags.
  Following discussion on linux-next, we believe our version to be more
  accurate than the one in the tree, so the resolution is to take our
  version for all the SPDX conflicts"

Note on the SPDX license tag conversion conflicts: the SCSI tree had
done its own SPDX conversion, which in some cases conflicted with the
treewide ones done by Thomas &amp; co.

In almost all cases, the conflicts were purely syntactic: the SCSI tree
used the old-style SPDX tags ("GPL-2.0" and "GPL-2.0+") while the
treewide conversion had used the new-style ones ("GPL-2.0-only" and
"GPL-2.0-or-later").

In these cases I picked the new-style one.

In a few cases, the SPDX conversion was actually different, though.  As
explained by James above, and in more detail in a pre-pull-request
thread:

 "The other problem is actually substantive: In the libsas code Luben
  Tuikov originally specified gpl 2.0 only by dint of stating:

  * This file is licensed under GPLv2.

  In all the libsas files, but then muddied the water by quoting GPLv2
  verbatim (which includes the or later than language). So for these
  files Christoph did the conversion to v2 only SPDX tags and Thomas
  converted to v2 or later tags"

So in those cases, where the spdx tag substantially mattered, I took the
SCSI tree conversion of it, but then also took the opportunity to turn
the old-style "GPL-2.0" into a new-style "GPL-2.0-only" tag.

Similarly, when there were whitespace differences or other differences
to the comments around the copyright notices, I took the version from
the SCSI tree as being the more specific conversion.

Finally, in the spdx conversions that had no conflicts (because the
treewide ones hadn't been done for those files), I just took the SCSI
tree version as-is, even if it was old-style.  The old-style conversions
are perfectly valid, even if the "-only" and "-or-later" versions are
perhaps more descriptive.

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (185 commits)
  scsi: qla2xxx: move IO flush to the front of NVME rport unregistration
  scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition
  scsi: qla2xxx: on session delete, return nvme cmd
  scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices
  scsi: megaraid_sas: Update driver version to 07.710.06.00-rc1
  scsi: megaraid_sas: Introduce various Aero performance modes
  scsi: megaraid_sas: Use high IOPS queues based on IO workload
  scsi: megaraid_sas: Set affinity for high IOPS reply queues
  scsi: megaraid_sas: Enable coalescing for high IOPS queues
  scsi: megaraid_sas: Add support for High IOPS queues
  scsi: megaraid_sas: Add support for MPI toolbox commands
  scsi: megaraid_sas: Offload Aero RAID5/6 division calculations to driver
  scsi: megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura
  scsi: megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD
  scsi: megaraid_sas: Handle sequence JBOD map failure at driver level
  scsi: megaraid_sas: Don't send FPIO to RL Bypass queue
  scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault
  scsi: megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout
  scsi: megaraid_sas: Call disable_irq from process IRQ poll
  scsi: megaraid_sas: Remove few debug counters from IO path
  ...
</content>
</entry>
<entry>
<title>scsi: mac_scsi: Enable PDMA on Mac IIfx</title>
<updated>2019-06-20T19:37:03Z</updated>
<author>
<name>Finn Thain</name>
</author>
<published>2019-06-09T01:19:11Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=8fb9a64eb6e6fe502187c154434729871d9e5578'/>
<id>urn:sha1:8fb9a64eb6e6fe502187c154434729871d9e5578</id>
<content type='text'>
Add support for Apple's custom "SCSI DMA" chip. This patch doesn't make use
of its DMA capability. Just the PDMA capability is sufficient to improve
sequential read throughput by a factor of 5.

Cc: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Cc: Joshua Thompson &lt;funaho@jurai.org&gt;
Cc: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Signed-off-by: Finn Thain &lt;fthain@telegraphics.com.au&gt;
Tested-by: Stan Johnson &lt;userm57@yahoo.com&gt;
Tested-by: Michael Schmitz &lt;schmitzmic@gmail.com&gt;
Acked-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Signed-off-by: Martin K. Petersen &lt;martin.petersen@oracle.com&gt;
</content>
</entry>
<entry>
<title>treewide: Add SPDX license identifier - Makefile/Kconfig</title>
<updated>2019-05-21T08:50:46Z</updated>
<author>
<name>Thomas Gleixner</name>
</author>
<published>2019-05-19T12:07:45Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=ec8f24b7faaf3d4799a7c3f4c1b87f6b02778ad1'/>
<id>urn:sha1:ec8f24b7faaf3d4799a7c3f4c1b87f6b02778ad1</id>
<content type='text'>
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
</entry>
</feed>
