kernel.git/arch/m68k/kernel/traps.c, branch linux-6.0.y

m68k: Add common forward declaration for show_registers()

2022-07-12T08:48:21Z

There are several forward declarations for show_registers() in C source files. Replace these by a single common forward declaration in , and include where needed. Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Vivier Link: https://lore.kernel.org/r/d5b6a7f9af3e82f0ccb67edac09d9ee45d457932.1657114791.git.geert@linux-m68k.org

exit: Add and use make_task_dead.

2021-12-13T18:04:45Z

There are two big uses of do_exit. The first is it's design use to be the guts of the exit(2) system call. The second use is to terminate a task after something catastrophic has happened like a NULL pointer in kernel code. Add a function make_task_dead that is initialy exactly the same as do_exit to cover the cases where do_exit is called to handle catastrophic failure. In time this can probably be reduced to just a light wrapper around do_task_dead. For now keep it exactly the same so that there will be no behavioral differences introducing this new concept. Replace all of the uses of do_exit that use it for catastraphic task cleanup with make_task_dead to make it clear what the code is doing. As part of this rename rewind_stack_do_exit rewind_stack_and_make_dead. Signed-off-by: "Eric W. Biederman"

signal: Replace force_fatal_sig with force_exit_sig when in doubt

2021-11-19T15:15:58Z

Recently to prevent issues with SECCOMP_RET_KILL and similar signals being changed before they are delivered SA_IMMUTABLE was added. Unfortunately this broke debuggers[1][2] which reasonably expect to be able to trap synchronous SIGTRAP and SIGSEGV even when the target process is not configured to handle those signals. Add force_exit_sig and use it instead of force_fatal_sig where historically the code has directly called do_exit. This has the implementation benefits of going through the signal exit path (including generating core dumps) without the danger of allowing userspace to ignore or change these signals. This avoids userspace regressions as older kernels exited with do_exit which debuggers also can not intercept. In the future is should be possible to improve the quality of implementation of the kernel by changing some of these force_exit_sig calls to force_fatal_sig. That can be done where it matters on a case-by-case basis with careful analysis. Reported-by: Kyle Huey Reported-by: kernel test robot [1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com [2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020 Fixes: 00b06da29cf9 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed") Fixes: a3616a3c0272 ("signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die") Fixes: 83a1f27ad773 ("signal/powerpc: On swapcontext failure force SIGSEGV") Fixes: 9bc508cf0791 ("signal/s390: Use force_sigsegv in default_trap_handler") Fixes: 086ec444f866 ("signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig") Fixes: c317d306d550 ("signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails") Fixes: 695dd0d634df ("signal/x86: In emulate_vsyscall force a signal instead of calling do_exit") Fixes: 1fbd60df8a85 ("signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.") Fixes: 941edc5bf174 ("exit/syscall_user_dispatch: Send ordinary signals on failure") Link: https://lkml.kernel.org/r/871r3dqfv8.fsf_-_@email.froward.int.ebiederm.org Reviewed-by: Kees Cook Tested-by: Kees Cook Tested-by: Kyle Huey Signed-off-by: "Eric W. Biederman"

Merge branch 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2021-11-11T00:15:54Z

Pull exit cleanups from Eric Biederman: "While looking at some issues related to the exit path in the kernel I found several instances where the code is not using the existing abstractions properly. This set of changes introduces force_fatal_sig a way of sending a signal and not allowing it to be caught, and corrects the misuse of the existing abstractions that I found. A lot of the misuse of the existing abstractions are silly things such as doing something after calling a no return function, rolling BUG by hand, doing more work than necessary to terminate a kernel thread, or calling do_exit(SIGKILL) instead of calling force_sig(SIGKILL). In the review a deficiency in force_fatal_sig and force_sig_seccomp where ptrace or sigaction could prevent the delivery of the signal was found. I have added a change that adds SA_IMMUTABLE to change that makes it impossible to interrupt the delivery of those signals, and allows backporting to fix force_sig_seccomp And Arnd found an issue where a function passed to kthread_run had the wrong prototype, and after my cleanup was failing to build." * 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits) soc: ti: fix wkup_m3_rproc_boot_thread return type signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV) exit/r8188eu: Replace the macro thread_exit with a simple return 0 exit/rtl8712: Replace the macro thread_exit with a simple return 0 exit/rtl8723bs: Replace the macro thread_exit with a simple return 0 signal/x86: In emulate_vsyscall force a signal instead of calling do_exit signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails exit/syscall_user_dispatch: Send ordinary signals on failure signal: Implement force_fatal_sig exit/kthread: Have kernel threads return instead of calling do_exit signal/s390: Use force_sigsegv in default_trap_handler signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved. signal/vm86_32: Replace open coded BUG_ON with an actual BUG_ON signal/sparc: In setup_tsb_params convert open coded BUG into BUG signal/powerpc: On swapcontext failure force SIGSEGV signal/sh: Use force_sig(SIGKILL) instead of do_group_exit(SIGKILL) signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT signal/sparc32: Remove unreachable do_exit in do_sparc_fault ...

signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV)

2021-10-29T19:31:34Z

Now that force_fatal_sig exists it is unnecessary and a bit confusing to use force_sigsegv in cases where the simpler force_fatal_sig is wanted. So change every instance we can to make the code clearer. Acked-by: Geert Uytterhoeven Reviewed-by: Philippe Mathieu-Daudé Link: https://lkml.kernel.org/r/877de7jrev.fsf@disp2133 Signed-off-by: "Eric W. Biederman"

m68k: Remove set_fs()

2021-09-24T11:35:07Z

Add a m68k-only set_fc helper to set the SFC and DFC registers for the few places that need to override it for special MM operations, but disconnect that from the deprecated kernel-wide set_fs() API. Note that the SFC/DFC registers are context switched, so there is no need to disable preemption. Partially based on an earlier patch from Linus Torvalds . Signed-off-by: Christoph Hellwig Reviewed-by: Michael Schmitz Tested-by: Michael Schmitz Link: https://lore.kernel.org/r/20210916070405.52750-7-hch@lst.de Signed-off-by: Geert Uytterhoeven

signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die

2021-08-26T14:59:15Z

In the fpsp040 code when copyin or copyout fails call force_sigsegv(SIGSEGV) instead of do_exit(SIGSEGV). This solves a couple of problems. Because do_exit embeds the ptrace stop PTRACE_EVENT_EXIT a complete stack frame needs to be present for that to work correctly. There is always the information needed for a ptrace stop where get_signal is called. So exiting with a signal solves the ptrace issue. Further exiting with a signal ensures that all of the threads in a process are killed not just the thread that malfunctioned. Which avoids confusing userspace. To make force_sigsegv(SIGSEGV) work in fpsp040_die modify the code to save all of the registers and jump to ret_from_exception (which ultimately calls get_signal) after fpsp040_die returns. v2: Updated the branches to use gas's pseudo ops that automatically calculate the best branch instruction to use for the purpose. v1: https://lkml.kernel.org/r/87a6m8kgtx.fsf_-_@disp2133 Link: https://lkml.kernel.org/r/87tukghjfs.fsf_-_@disp2133 Acked-by: Geert Uytterhoeven Signed-off-by: "Eric W. Biederman"

m68k: Use get_kernel_nofault() in show_registers()

2020-08-26T11:26:52Z

Use the proper get_kernel_nofault() helper to access an unsafe kernel pointer without faulting instead of playing with set_fs() and get_user(). Signed-off-by: Christoph Hellwig Link: https://lore.kernel.org/r/20200720114314.196686-1-hch@lst.de Signed-off-by: Geert Uytterhoeven

mm: remove unneeded includes of

2020-08-07T18:33:26Z

Patch series "mm: cleanup usage of " Most architectures have very similar versions of pXd_alloc_one() and pXd_free_one() for intermediate levels of page table. These patches add generic versions of these functions in and enable use of the generic functions where appropriate. In addition, functions declared and defined in headers are used mostly by core mm and early mm initialization in arch and there is no actual reason to have the included all over the place. The first patch in this series removes unneeded includes of In the end it didn't work out as neatly as I hoped and moving pXd_alloc_track() definitions to would require unnecessary changes to arches that have custom page table allocations, so I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local to mm/. This patch (of 8): In most cases header is required only for allocations of page table memory. Most of the .c files that include that header do not use symbols declared in and do not require that header. As for the other header files that used to include , it is possible to move that include into the .c file that actually uses symbols from and drop the include from the header file. The process was somewhat automated using sed -i -E '/[<"]asm\/pgalloc\.h/d' \ $(grep -L -w -f /tmp/xx \ $(git grep -E -l '[<"]asm/pgalloc\.h')) where /tmp/xx contains all the symbols defined in arch/*/include/asm/pgalloc.h. [rppt@linux.ibm.com: fix powerpc warning] Signed-off-by: Mike Rapoport Signed-off-by: Andrew Morton Reviewed-by: Pekka Enberg Acked-by: Geert Uytterhoeven [m68k] Cc: Abdul Haleem Cc: Andy Lutomirski Cc: Arnd Bergmann Cc: Christophe Leroy Cc: Joerg Roedel Cc: Max Filippov Cc: Peter Zijlstra Cc: Satheesh Rajendran Cc: Stafford Horne Cc: Stephen Rothwell Cc: Steven Rostedt Cc: Joerg Roedel Cc: Matthew Wilcox Link: http://lkml.kernel.org/r/20200627143453.31835-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200627143453.31835-2-rppt@kernel.org Signed-off-by: Linus Torvalds

kernel: rename show_stack_loglvl() => show_stack()

2020-06-09T16:39:13Z

Now the last users of show_stack() got converted to use an explicit log level, show_stack_loglvl() can drop it's redundant suffix and become once again well known show_stack(). Signed-off-by: Dmitry Safonov Signed-off-by: Andrew Morton Link: http://lkml.kernel.org/r/20200418201944.482088-51-dima@arista.com Signed-off-by: Linus Torvalds