kernel.git/arch/m68k/include, branch linux-4.19.y

m68k: mcfgpio: Fix incorrect register offset for CONFIG_M5441x

2024-12-05T09:59:36Z

[ Upstream commit f212140962c93cd5da43283a18e31681540fc23d ] Fix a typo in the CONFIG_M5441x preprocessor condition, where the GPIO register offset was incorrectly set to 8 instead of 0. This prevented proper GPIO configuration for m5441x targets. Fixes: bea8bcb12da0 ("m68knommu: Add support for the Coldfire m5441x.") Signed-off-by: Jean-Michel Hautbois Signed-off-by: Greg Ungerer Signed-off-by: Sasha Levin

m68k: mvme147: Fix SCSI controller IRQ numbers

2024-12-05T09:59:30Z

[ Upstream commit 47bc874427382018fa2e3e982480e156271eee70 ] Sometime long ago the m68k IRQ code was refactored and the interrupt numbers for SCSI controller on this board ended up wrong, and it hasn't worked since. The PCC adds 0x40 to the vector for its interrupts so they end up in the user interrupt range. Hence, the kernel number should be the kernel offset for user interrupt range + the PCC interrupt number. Fixes: 200a3d352cd5 ("[PATCH] m68k: convert VME irq code") Signed-off-by: Daniel Palmer Reviewed-by: Finn Thain Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/0e7636a21a0274eea35bfd5d874459d5078e97cc.1727926187.git.fthain@linux-m68k.org Signed-off-by: Geert Uytterhoeven Signed-off-by: Sasha Levin

m68k: cmpxchg: Fix return value for default case in __arch_xchg()

2024-08-19T03:31:57Z

[ Upstream commit 21b9e722ad28c19c2bc83f18f540b3dbd89bf762 ] The return value of __invalid_xchg_size() is assigned to tmp instead of the return variable x. Assign it to x instead. Fixes: 2501cf768e4009a0 ("m68k: Fix xchg/cmpxchg to fail to link if given an inappropriate pointer") Signed-off-by: Thorsten Blum Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/20240702034116.140234-2-thorsten.blum@toblux.com Signed-off-by: Geert Uytterhoeven Signed-off-by: Sasha Levin

m68k/cpu: Switch to arch_cpu_finalize_init()

2023-08-08T17:49:17Z

commit 9ceecc2589b9d7cef6b321339ed8de484eac4b20 upstream check_bugs() is about to be phased out. Switch over to the new arch_cpu_finalize_init() implementation. No functional change. Signed-off-by: Thomas Gleixner Acked-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20230613224545.254342916@linutronix.de Signed-off-by: Daniel Sneddon Signed-off-by: Greg Kroah-Hartman

m68k: use fallback for random_get_entropy() instead of zero

2022-06-25T09:49:10Z

commit 0f392c95391f2d708b12971a07edaa7973f9eece upstream. In the event that random_get_entropy() can't access a cycle counter or similar, falling back to returning 0 is really not the best we can do. Instead, at least calling random_get_entropy_fallback() would be preferable, because that always needs to return _something_, even falling back to jiffies eventually. It's not as though random_get_entropy_fallback() is super high precision or guaranteed to be entropic, but basically anything that's not zero all the time is better than returning zero all the time. Cc: Thomas Gleixner Cc: Arnd Bergmann Acked-by: Geert Uytterhoeven Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

m68knommu: set ZERO_PAGE() to the allocated zeroed page

2022-06-14T14:59:34Z

[ Upstream commit dc068f46217970d9516f16cd37972a01d50dc055 ] The non-MMU m68k pagetable ZERO_PAGE() macro is being set to the somewhat non-sensical value of "virt_to_page(0)". The zeroth page is not in any way guaranteed to be a page full of "0". So the result is that ZERO_PAGE() will almost certainly contain random values. We already allocate a real "empty_zero_page" in the mm setup code shared between MMU m68k and non-MMU m68k. It is just not hooked up to the ZERO_PAGE() macro for the non-MMU m68k case. Fix ZERO_PAGE() to use the allocated "empty_zero_page" pointer. I am not aware of any specific issues caused by the old code. Link: https://lore.kernel.org/linux-m68k/2a462b23-5b8e-bbf4-ec7d-778434a3b9d7@google.com/T/#t Reported-by: Hugh Dickens Signed-off-by: Greg Ungerer Signed-off-by: Sasha Levin

m68k: Double cast io functions to unsigned long

2021-10-06T13:31:16Z

[ Upstream commit b1a89856fbf63fffde6a4771d8f1ac21df549e50 ] m68k builds fail widely with errors such as arch/m68k/include/asm/raw_io.h:20:19: error: cast to pointer from integer of different size arch/m68k/include/asm/raw_io.h:30:32: error: cast to pointer from integer of different size [-Werror=int-to-p On m68k, io functions are defined as macros. The problem is seen if the macro parameter variable size differs from the size of a pointer. Cast the parameter of all io macros to unsigned long before casting it to a pointer to fix the problem. Signed-off-by: Guenter Roeck Link: https://lore.kernel.org/r/20210907060729.2391992-1-linux@roeck-us.net Signed-off-by: Geert Uytterhoeven Signed-off-by: Sasha Levin

m68knommu: fix overwriting of bits in ColdFire V3 cache control

2020-08-26T08:31:01Z

[ Upstream commit bdee0e793cea10c516ff48bf3ebb4ef1820a116b ] The Cache Control Register (CACR) of the ColdFire V3 has bits that control high level caching functions, and also enable/disable the use of the alternate stack pointer register (the EUSP bit) to provide separate supervisor and user stack pointer registers. The code as it is today will blindly clear the EUSP bit on cache actions like invalidation. So it is broken for this case - and that will result in failed booting (interrupt entry and exit processing will be completely hosed). This only affects ColdFire V3 parts that support the alternate stack register (like the 5329 for example) - generally speaking new parts do, older parts don't. It has no impact on ColdFire V3 parts with the single stack pointer, like the 5307 for example. Fix the cache bit defines used, so they maintain the EUSP bit when carrying out cache actions through the CACR register. Signed-off-by: Greg Ungerer Signed-off-by: Sasha Levin

m68k: mac: Don't call via_flush_cache() on Mac IIfx

2020-06-22T07:05:18Z

[ Upstream commit bcc44f6b74106b31f0b0408b70305a40360d63b7 ] There is no VIA2 chip on the Mac IIfx, so don't call via_flush_cache(). This avoids a boot crash which appeared in v5.4. printk: console [ttyS0] enabled printk: bootconsole [debug0] disabled printk: bootconsole [debug0] disabled Calibrating delay loop... 9.61 BogoMIPS (lpj=48064) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) devtmpfs: initialized random: get_random_u32 called from bucket_table_alloc.isra.27+0x68/0x194 with crng_init=0 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 256 (order: -1, 3072 bytes, linear) NET: Registered protocol family 16 Data read fault at 0x00000000 in Super Data (pc=0x8a6a) BAD KERNEL BUSERR Oops: 00000000 Modules linked in: PC: [<00008a6a>] via_flush_cache+0x12/0x2c SR: 2700 SP: 01c1fe3c a2: 01c24000 d0: 00001119 d1: 0000000c d2: 00012000 d3: 0000000f d4: 01c06840 d5: 00033b92 a0: 00000000 a1: 00000000 Process swapper (pid: 1, task=01c24000) Frame format=B ssw=0755 isc=0200 isb=fff7 daddr=00000000 dobuf=01c1fed0 baddr=00008a6e dibuf=0000004e ver=f Stack from 01c1fec4: 01c1fed0 00007d7e 00010080 01c1fedc 0000792e 00000001 01c1fef4 00006b40 01c80000 00040000 00000006 00000003 01c1ff1c 004a545e 004ff200 00040000 00000000 00000003 01c06840 00033b92 004a5410 004b6c88 01c1ff84 000021e2 00000073 00000003 01c06840 00033b92 0038507a 004bb094 004b6ca8 004b6c88 004b6ca4 004b6c88 000021ae 00020002 00000000 01c0685d 00000000 01c1ffb4 0049f938 00409c85 01c06840 0045bd40 00000073 00000002 00000002 00000000 Call Trace: [<00007d7e>] mac_cache_card_flush+0x12/0x1c [<00010080>] fix_dnrm+0x2/0x18 [<0000792e>] cache_push+0x46/0x5a [<00006b40>] arch_dma_prep_coherent+0x60/0x6e [<00040000>] switched_to_dl+0x76/0xd0 [<004a545e>] dma_atomic_pool_init+0x4e/0x188 [<00040000>] switched_to_dl+0x76/0xd0 [<00033b92>] parse_args+0x0/0x370 [<004a5410>] dma_atomic_pool_init+0x0/0x188 [<000021e2>] do_one_initcall+0x34/0x1be [<00033b92>] parse_args+0x0/0x370 [<0038507a>] strcpy+0x0/0x1e [<000021ae>] do_one_initcall+0x0/0x1be [<00020002>] do_proc_dointvec_conv+0x54/0x74 [<0049f938>] kernel_init_freeable+0x126/0x190 [<0049f94c>] kernel_init_freeable+0x13a/0x190 [<004a5410>] dma_atomic_pool_init+0x0/0x188 [<00041798>] complete+0x0/0x3c [<000b9b0c>] kfree+0x0/0x20a [<0038df98>] schedule+0x0/0xd0 [<0038d604>] kernel_init+0x0/0xda [<0038d610>] kernel_init+0xc/0xda [<0038d604>] kernel_init+0x0/0xda [<00002d38>] ret_from_kernel_thread+0xc/0x14 Code: 0000 2079 0048 10da 2279 0048 10c8 d3c8 <1011> 0200 fff7 1280 d1f9 0048 10c8 1010 0000 0008 1080 4e5e 4e75 4e56 0000 2039 Disabling lock debugging due to kernel taint Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Thanks to Stan Johnson for capturing the console log and running git bisect. Git bisect said commit 8e3a68fb55e0 ("dma-mapping: make dma_atomic_pool_init self-contained") is the first "bad" commit. I don't know why. Perhaps mach_l2_flush first became reachable with that commit. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-and-tested-by: Stan Johnson Signed-off-by: Finn Thain Cc: Joshua Thompson Link: https://lore.kernel.org/r/b8bbeef197d6b3898e82ed0d231ad08f575a4b34.1589949122.git.fthain@telegraphics.com.au Signed-off-by: Geert Uytterhoeven Signed-off-by: Sasha Levin

m68k: Prevent some compiler warnings in Coldfire builds

2019-10-05T11:09:43Z

[ Upstream commit 94c04390225bcd8283103fd0c04be20cc30cc979 ] Since commit d3b41b6bb49e ("m68k: Dispatch nvram_ops calls to Atari or Mac functions"), Coldfire builds generate compiler warnings due to the unconditional inclusion of asm/atarihw.h and asm/macintosh.h. The inclusion of asm/atarihw.h causes warnings like this: In file included from ./arch/m68k/include/asm/atarihw.h:25:0, from arch/m68k/kernel/setup_mm.c:41, from arch/m68k/kernel/setup.c:3: ./arch/m68k/include/asm/raw_io.h:39:0: warning: "__raw_readb" redefined #define __raw_readb in_8 In file included from ./arch/m68k/include/asm/io.h:6:0, from arch/m68k/kernel/setup_mm.c:36, from arch/m68k/kernel/setup.c:3: ./arch/m68k/include/asm/io_no.h:16:0: note: this is the location of the previous definition #define __raw_readb(addr) \ ... This issue is resolved by dropping the asm/raw_io.h include. It turns out that asm/io_mm.h already includes that header file. Moving the relevant macro definitions helps to clarify this dependency and make it safe to include asm/atarihw.h. The other warnings look like this: In file included from arch/m68k/kernel/setup_mm.c:48:0, from arch/m68k/kernel/setup.c:3: ./arch/m68k/include/asm/macintosh.h:19:35: warning: 'struct irq_data' declared inside parameter list will not be visible outside of this definition or declaration extern void mac_irq_enable(struct irq_data *data); ^~~~~~~~ ... This issue is resolved by adding the missing linux/irq.h include. Signed-off-by: Finn Thain Acked-by: Greg Ungerer Signed-off-by: Geert Uytterhoeven Signed-off-by: Sasha Levin