kernel.git/arch/loongarch/kernel, branch linux-6.10.y

LoongArch: Define ARCH_IRQ_INIT_FLAGS as IRQ_NOPROBE

2024-09-30T14:29:28Z

[ Upstream commit 274ea3563e5ab9f468c15bfb9d2492803a66d9be ] Currently we call irq_set_noprobe() in a loop for all IRQs, but indeed it only works for IRQs below NR_IRQS_LEGACY because at init_IRQ() only legacy interrupts have been allocated. Instead, we can define ARCH_IRQ_INIT_FLAGS as IRQ_NOPROBE in asm/hwirq.h and the core will automatically set the flag for all interrupts. Reviewed-by: Thomas Gleixner Signed-off-by: Huacai Chen Signed-off-by: Tianyang Zhang Signed-off-by: Sasha Levin

LoongArch: Use correct API to map cmdline in relocate_kernel()

2024-09-12T09:13:03Z

[ Upstream commit 0124fbb4c6dba23dbdf80c829be68adbccde2722 ] fw_arg1 is in memory space rather than I/O space, so we should use early_memremap_ro() instead of early_ioremap() to map the cmdline. Moreover, we should unmap it after using. Suggested-by: Jiaxun Yang Reviewed-by: Jiaxun Yang Signed-off-by: Huacai Chen Signed-off-by: Sasha Levin

LoongArch: Add ifdefs to fix LSX and LASX related warnings

2024-09-04T11:29:55Z

commit 80376323e2b6a4559f86b2b4d864848ac25cb054 upstream. There exist some warnings when building kernel if CONFIG_CPU_HAS_LBT is set but CONFIG_CPU_HAS_LSX and CONFIG_CPU_HAS_LASX are not set. In this case, there are no definitions of _restore_lsx & _restore_lasx and there are also no definitions of kvm_restore_lsx & kvm_restore_lasx in fpu.S and switch.S respectively, just add some ifdefs to fix these warnings. AS arch/loongarch/kernel/fpu.o arch/loongarch/kernel/fpu.o: warning: objtool: unexpected relocation symbol type in .rela.discard.func_stack_frame_non_standard: 0 arch/loongarch/kernel/fpu.o: warning: objtool: unexpected relocation symbol type in .rela.discard.func_stack_frame_non_standard: 0 AS [M] arch/loongarch/kvm/switch.o arch/loongarch/kvm/switch.o: warning: objtool: unexpected relocation symbol type in .rela.discard.func_stack_frame_non_standard: 0 arch/loongarch/kvm/switch.o: warning: objtool: unexpected relocation symbol type in .rela.discard.func_stack_frame_non_standard: 0 MODPOST Module.symvers ERROR: modpost: "kvm_restore_lsx" [arch/loongarch/kvm/kvm.ko] undefined! ERROR: modpost: "kvm_restore_lasx" [arch/loongarch/kvm/kvm.ko] undefined! Cc: stable@vger.kernel.org # 6.9+ Fixes: cb8a2ef0848c ("LoongArch: Add ORC stack unwinder support") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202408120955.qls5oNQY-lkp@intel.com/ Signed-off-by: Tiezhu Yang Signed-off-by: Huacai Chen Signed-off-by: Greg Kroah-Hartman

LoongArch: Enable general EFI poweroff method

2024-08-14T13:34:32Z

commit e688c220732e518c2eb1639e9ef77d4a9311713c upstream. efi_shutdown_init() can register a general sys_off handler named efi_power_off(). Enable this by providing efi_poweroff_required(), like arm and x86. Since EFI poweroff is also supported on LoongArch, and the enablement makes the poweroff function usable for hardwares which lack ACPI S5. We prefer ACPI poweroff rather than EFI poweroff (like x86), so we only require EFI poweroff if acpi_gbl_reduced_hardware or acpi_no_s5 is true. Cc: stable@vger.kernel.org Acked-by: Ard Biesheuvel Signed-off-by: Miao Wang Signed-off-by: Huacai Chen Signed-off-by: Greg Kroah-Hartman

LoongArch: Check TIF_LOAD_WATCH to enable user space watchpoint

2024-08-03T07:00:27Z

[ Upstream commit 3892b11eac5aaaeefbf717f1953288b77759d9e2 ] Currently, there are some places to set CSR.PRMD.PWE, the first one is in hw_breakpoint_thread_switch() to enable user space singlestep via checking TIF_SINGLESTEP, the second one is in hw_breakpoint_control() to enable user space watchpoint. For the latter case, it should also check TIF_LOAD_WATCH to make the logic correct and clear. Fixes: c8e57ab0995c ("LoongArch: Trigger user-space watchpoints correctly") Signed-off-by: Tiezhu Yang Signed-off-by: Huacai Chen Signed-off-by: Sasha Levin

syscalls: mmap(): use unsigned offset type consistently

2024-06-25T13:57:38Z

Most architectures that implement the old-style mmap() with byte offset use 'unsigned long' as the type for that offset, but microblaze and riscv have the off_t type that is shared with userspace, matching the prototype in include/asm-generic/syscalls.h. Make this consistent by using an unsigned argument everywhere. This changes the behavior slightly, as the argument is shifted to a page number, and an user input with the top bit set would result in a negative page offset rather than a large one as we use elsewhere. For riscv, the 32-bit sys_mmap2() definition actually used a custom type that is different from the global declaration, but this was missed due to an incorrect type check. Signed-off-by: Arnd Bergmann

LoongArch: Fix multiple hardware watchpoint issues

2024-06-21T02:18:40Z

In the current code, if multiple hardware breakpoints/watchpoints in a user-space thread, some of them will not be triggered. When debugging the following code using gdb. lihui@bogon:~$ cat test.c #include int a = 0; int main() { printf("start test\n"); a = 1; printf("a = %d\n", a); printf("end test\n"); return 0; } lihui@bogon:~$ gcc -g test.c -o test lihui@bogon:~$ gdb test ... (gdb) start ... Temporary breakpoint 1, main () at test.c:5 5 printf("start test\n"); (gdb) watch a Hardware watchpoint 2: a (gdb) hbreak 8 Hardware assisted breakpoint 3 at 0x1200006ec: file test.c, line 8. (gdb) c Continuing. start test a = 1 Breakpoint 3, main () at test.c:8 8 printf("end test\n"); ... The first hardware watchpoint is not triggered, the root causes are: 1. In hw_breakpoint_control(), The FWPnCFG1.2.4/MWPnCFG1.2.4 register settings are not distinguished. They should be set based on hardware watchpoint functions (fetch or load/store operations). 2. In breakpoint_handler() and watchpoint_handler(), it doesn't identify which watchpoint is triggered. So, all watchpoint-related perf_event callbacks are called and siginfo is sent to the user space. This will cause user-space unable to determine which watchpoint is triggered. The kernel need to identity which watchpoint is triggered via MWPS/ FWPS registers, and then call the corresponding perf event callbacks to report siginfo to the user-space. Modify the relevant code to solve above issues. All changes according to the LoongArch Reference Manual: https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints With this patch: lihui@bogon:~$ gdb test ... (gdb) start ... Temporary breakpoint 1, main () at test.c:5 5 printf("start test\n"); (gdb) watch a Hardware watchpoint 2: a (gdb) hbreak 8 Hardware assisted breakpoint 3 at 0x1200006ec: file test.c, line 8. (gdb) c Continuing. start test Hardware watchpoint 2: a Old value = 0 New value = 1 main () at test.c:7 7 printf("a = %d\n", a); (gdb) c Continuing. a = 1 Breakpoint 3, main () at test.c:8 8 printf("end test\n"); (gdb) c Continuing. end test [Inferior 1 (process 778) exited normally] Cc: stable@vger.kernel.org Signed-off-by: Hui Li Signed-off-by: Huacai Chen

LoongArch: Trigger user-space watchpoints correctly

2024-06-21T02:18:40Z

In the current code, gdb can set the watchpoint successfully through ptrace interface, but watchpoint will not be triggered. When debugging the following code using gdb. lihui@bogon:~$ cat test.c #include int a = 0; int main() { a = 1; printf("a = %d\n", a); return 0; } lihui@bogon:~$ gcc -g test.c -o test lihui@bogon:~$ gdb test ... (gdb) watch a ... (gdb) r ... a = 1 [Inferior 1 (process 4650) exited normally] No watchpoints were triggered, the root causes are: 1. Kernel uses perf_event and hw_breakpoint framework to control watchpoint, but the perf_event corresponding to watchpoint is not enabled. So it needs to be enabled according to MWPnCFG3 or FWPnCFG3 PLV bit field in ptrace_hbp_set_ctrl(), and privilege is set according to the monitored addr in hw_breakpoint_control(). Furthermore, add a judgment in ptrace_hbp_set_addr() to ensure kernel-space addr cannot be monitored in user mode. 2. The global enable control for all watchpoints is the WE bit of CSR.CRMD, and hardware sets the value to 0 when an exception is triggered. When the ERTN instruction is executed to return, the hardware restores the value of the PWE field of CSR.PRMD here. So, before a thread containing watchpoints be scheduled, the PWE field of CSR.PRMD needs to be set to 1. Add this modification in hw_breakpoint_control(). All changes according to the LoongArch Reference Manual: https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#basic-control-and-status-registers With this patch: lihui@bogon:~$ gdb test ... (gdb) watch a Hardware watchpoint 1: a (gdb) r ... Hardware watchpoint 1: a Old value = 0 New value = 1 main () at test.c:6 6 printf("a = %d\n", a); (gdb) c Continuing. a = 1 [Inferior 1 (process 775) exited normally] Cc: stable@vger.kernel.org Signed-off-by: Hui Li Signed-off-by: Huacai Chen

LoongArch: Fix watchpoint setting error

2024-06-21T02:18:40Z

In the current code, when debugging the following code using gdb, "invalid argument ..." message will be displayed. lihui@bogon:~$ cat test.c #include int a = 0; int main() { a = 1; return 0; } lihui@bogon:~$ gcc -g test.c -o test lihui@bogon:~$ gdb test ... (gdb) watch a Hardware watchpoint 1: a (gdb) r ... Invalid argument setting hardware debug registers There are mainly two types of issues. 1. Some incorrect judgment condition existed in user_watch_state argument parsing, causing -EINVAL to be returned. When setting up a watchpoint, gdb uses the ptrace interface, ptrace(PTRACE_SETREGSET, tid, NT_LOONGARCH_HW_WATCH, (void *) &iov)). Register values in user_watch_state as follows: addr[0] = 0x0, mask[0] = 0x0, ctrl[0] = 0x0 addr[1] = 0x0, mask[1] = 0x0, ctrl[1] = 0x0 addr[2] = 0x0, mask[2] = 0x0, ctrl[2] = 0x0 addr[3] = 0x0, mask[3] = 0x0, ctrl[3] = 0x0 addr[4] = 0x0, mask[4] = 0x0, ctrl[4] = 0x0 addr[5] = 0x0, mask[5] = 0x0, ctrl[5] = 0x0 addr[6] = 0x0, mask[6] = 0x0, ctrl[6] = 0x0 addr[7] = 0x12000803c, mask[7] = 0x0, ctrl[7] = 0x610 In arch_bp_generic_fields(), return -EINVAL when ctrl.len is LOONGARCH_BREAKPOINT_LEN_8(0b00). So delete the incorrect judgment here. In ptrace_hbp_fill_attr_ctrl(), when note_type is NT_LOONGARCH_HW_WATCH and ctrl[0] == 0x0, if ((type & HW_BREAKPOINT_RW) != type) will return -EINVAL. Here ctrl.type should be set based on note_type, and unnecessary judgments can be removed. 2. The watchpoint argument was not set correctly due to unnecessary offset and alignment_mask. Modify ptrace_hbp_fill_attr_ctrl() and hw_breakpoint_arch_parse(), which ensure the watchpont argument is set correctly. All changes according to the LoongArch Reference Manual: https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints Cc: stable@vger.kernel.org Signed-off-by: Hui Li Signed-off-by: Huacai Chen

LoongArch: Fix entry point in kernel image header

2024-06-03T07:45:53Z

Currently kernel entry in head.S is in DMW address range, firmware is instructed to jump to this address after loading the kernel image. However kernel should not make any assumption on firmware's DMW setting, thus the entry point should be a physical address falls into direct translation region. Fix by converting entry address to physical and amend entry calculation logic in libstub accordingly. BTW, use ABSOLUTE() to calculate variables to make Clang/LLVM happy. Cc: stable@vger.kernel.org Signed-off-by: Jiaxun Yang Signed-off-by: Huacai Chen