kernel.git/arch/loongarch/kernel/setup.c, branch linux-6.15.y

crash: remove an unused argument from reserve_crashkernel_generic()

2025-03-17T05:30:47Z

cmdline argument is not used in reserve_crashkernel_generic() so remove it. Correspondingly, all the callers have been updated as well. No functional change intended. Link: https://lkml.kernel.org/r/20250131113830.925179-3-sourabhjain@linux.ibm.com Signed-off-by: Sourabh Jain Acked-by: Hari Bathini Acked-by: Baoquan He Cc: Madhavan Srinivasan Cc: Mahesh Salgaonkar Cc: Michael Ellerman Signed-off-by: Andrew Morton

LoongArch: Set max_pfn with the PFN of the last page

2025-03-08T05:51:32Z

The current max_pfn equals to zero. In this case, it causes user cannot get some page information through /proc filesystem such as kpagecount. The following message is displayed by stress-ng test suite with command "stress-ng --verbose --physpage 1 -t 1". # stress-ng --verbose --physpage 1 -t 1 stress-ng: error: [1691] physpage: cannot read page count for address 0x134ac000 in /proc/kpagecount, errno=22 (Invalid argument) stress-ng: error: [1691] physpage: cannot read page count for address 0x7ffff207c3a8 in /proc/kpagecount, errno=22 (Invalid argument) stress-ng: error: [1691] physpage: cannot read page count for address 0x134b0000 in /proc/kpagecount, errno=22 (Invalid argument) ... After applying this patch, the kernel can pass the test. # stress-ng --verbose --physpage 1 -t 1 stress-ng: debug: [1701] physpage: [1701] started (instance 0 on CPU 3) stress-ng: debug: [1701] physpage: [1701] exited (instance 0 on CPU 3) stress-ng: debug: [1700] physpage: [1701] terminated (success) Cc: stable@vger.kernel.org # 6.8+ Fixes: ff6c3d81f2e8 ("NUMA: optimize detection of memory with no node id assigned by firmware") Signed-off-by: Bibo Mao Signed-off-by: Huacai Chen

mm/memblock: add memblock_alloc_or_panic interface

2025-01-26T04:22:38Z

Before SLUB initialization, various subsystems used memblock_alloc to allocate memory. In most cases, when memory allocation fails, an immediate panic is required. To simplify this behavior and reduce repetitive checks, introduce `memblock_alloc_or_panic`. This function ensures that memory allocation failures result in a panic automatically, improving code readability and consistency across subsystems that require this behavior. [guoweikang.kernel@gmail.com: arch/s390: save_area_alloc default failure behavior changed to panic] Link: https://lkml.kernel.org/r/20250109033136.2845676-1-guoweikang.kernel@gmail.com Link: https://lore.kernel.org/lkml/Z2fknmnNtiZbCc7x@kernel.org/ Link: https://lkml.kernel.org/r/20250102072528.650926-1-guoweikang.kernel@gmail.com Signed-off-by: Guo Weikang Acked-by: Geert Uytterhoeven [m68k] Reviewed-by: Alexander Gordeev [s390] Acked-by: Mike Rapoport (Microsoft) Cc: Alexander Gordeev Signed-off-by: Andrew Morton

Merge tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2024-11-20T21:19:25Z

Pull devicetree updates from Rob Herring: "Bindings: - Enable dtc "interrupt_provider" warnings for binding examples. Fix the warnings in fsl,mu-msi and ti,sci-inta due to this. - Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and altr,fpga-passive-serial to DT schema format - Add some documentation on the different forms of YAML text blocks which are a constant source of review comments - Fix some schema errors in constraints for arrays - Add compatibles for qcom,sar2130p-pdc and onnn,adt7462 DT core: - Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n - Add some warnings on deprecated address handling - Rework early_init_dt_scan() so the arch can pass in the phys address of the DTB as __pa() is not always valid to use. This fixes a warning for arm64 with kexec. - Add and use some new DT graph iterators for iterating over ports and endpoints - Rework reserved-memory handling to be sized dynamically for fixed regions - Optimize of_modalias() to avoid a strlen() call - Constify struct device_node and property pointers where ever possible" * tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits) of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible of/address: Rework bus matching to avoid warnings of: WARN on deprecated #address-cells/#size-cells handling of/fdt: Don't use default address cell sizes for address translation dt-bindings: Enable dtc "interrupt_provider" warnings of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml media: xilinx-tpg: use new of_graph functions fbdev: omapfb: use new of_graph functions gpu: drm: omapdrm: use new of_graph functions ASoC: audio-graph-card2: use new of_graph functions ASoC: audio-graph-card: use new of_graph functions ASoC: test-component: use new of_graph functions of: property: use new of_graph functions of: property: add of_graph_get_next_port_endpoint() of: property: add of_graph_get_next_port() of: module: remove strlen() call in of_modalias() ...

of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify

2024-10-29T20:32:45Z

__pa() is only intended to be used for linear map addresses and using it for initial_boot_params which is in fixmap for arm64 will give an incorrect value. Hence save the physical address when it is known at boot time when calling early_init_dt_scan for arm64 and use it at kexec time instead of converting the virtual address using __pa(). Note that arm64 doesn't need the FDT region reserved in the DT as the kernel explicitly reserves the passed in FDT. Therefore, only a debug warning is fixed with this change. Reported-by: Breno Leitao Suggested-by: Mark Rutland Signed-off-by: Usama Arif Fixes: ac10be5cdbfa ("arm64: Use common of_kexec_alloc_and_setup_fdt()") Link: https://lore.kernel.org/r/20241023171426.452688-1-usamaarif642@gmail.com Signed-off-by: Rob Herring (Arm)

LoongArch: Get correct cores_per_package for SMT systems

2024-10-21T14:11:18Z

In loongson_sysconf, The "core" of cores_per_node and cores_per_package stands for a logical core, which means in a SMT system it stands for a thread indeed. This information is gotten from SMBIOS Type4 Structure, so in order to get a correct cores_per_package for both SMT and non-SMT systems in parse_cpu_table() we should use SMBIOS_THREAD_PACKAGE_OFFSET instead of SMBIOS_CORE_PACKAGE_OFFSET. Cc: stable@vger.kernel.org Reported-by: Chao Li Tested-by: Chao Li Signed-off-by: Huacai Chen

LoongArch: Revert qspinlock to test-and-set simple lock on VM

2024-09-11T15:26:32Z

Similar with x86, when VM is detected, revert to a simple test-and-set lock to avoid the horrors of queue preemption. Tested on 3C5000 Dual-way machine with 32 cores and 2 numa nodes, test case is kcbench on kernel mainline 6.10, the detailed command is "kcbench --src /root/src/linux" Performance on host machine kernel compile time performance impact Original 150.29 seconds With patch 150.19 seconds almost no impact Performance on virtual machine: 1. 1 VM with 32 vCPUs and 2 numa node, numa node pinned kernel compile time performance impact Original 170.87 seconds With patch 171.73 seconds almost no impact 2. 2 VMs, each VM with 32 vCPUs and 2 numa node, numa node pinned kernel compile time performance impact Original 2362.04 seconds With patch 354.73 seconds +565% Signed-off-by: Bibo Mao Signed-off-by: Huacai Chen

LoongArch: Always enumerate MADT and setup logical-physical CPU mapping

2024-07-20T14:40:58Z

Some drivers want to use cpu_logical_map(), early_cpu_to_node() and some other CPU mapping APIs, even if we use "nr_cpus=1" to hard limit the CPU number. This is strongly required for the multi-bridges machines. Currently, we stop parsing the MADT if the nr_cpus limit is reached, but to achieve the above goal we should always enumerate the MADT table and setup logical-physical CPU mapping whether there is a nr_cpus limit. Rework the MADT enumeration: 1. Define a flag "cpu_enumerated" to distinguish the first enumeration (cpu_enumerated=0) and the physical hotplug case (cpu_enumerated=1) for set_processor_mask(). 2. If cpu_enumerated=0, stop parsing only when NR_CPUS limit is reached, so we can setup logical-physical CPU mapping; if cpu_enumerated=1, stop parsing when nr_cpu_ids limit is reached, so we can avoid some runtime bugs. Once logical-physical CPU mapping is setup, we will let cpu_enumerated=1. 3. Use find_first_zero_bit() instead of cpumask_next_zero() to find the next zero bit (free logical CPU id) in the cpu_present_mask, because cpumask_next_zero() will stop at nr_cpu_ids. 4. Only touch cpu_possible_mask if cpu_enumerated=0, this is in order to avoid some potential crashes, because cpu_possible_mask is marked as __ro_after_init. 5. In prefill_possible_map(), clear cpu_present_mask bits greater than nr_cpu_ids, in order to avoid a CPU be "present" but not "possible". Signed-off-by: Huacai Chen

LoongArch: Fix built-in DTB detection

2024-06-03T07:45:53Z

fdt_check_header(__dtb_start) will always success because kernel provides a dummy dtb, and by coincidence __dtb_start clashed with entry of this dummy dtb. The consequence is fdt passed from firmware will never be taken. Fix by trying to utilise __dtb_start only when CONFIG_BUILTIN_DTB is enabled. Cc: stable@vger.kernel.org Fixes: 7b937cc243e5 ("of: Create of_root if no dtb provided by firmware") Signed-off-by: Jiaxun Yang Signed-off-by: Huacai Chen

LoongArch: Remove CONFIG_ACPI_TABLE_UPGRADE in platform_init()

2024-06-03T07:45:53Z

Both acpi_table_upgrade() and acpi_boot_table_init() are defined as empty functions under !CONFIG_ACPI_TABLE_UPGRADE and !CONFIG_ACPI in include/linux/acpi.h, there are no implicit declaration errors with various configs. #ifdef CONFIG_ACPI_TABLE_UPGRADE void acpi_table_upgrade(void); #else static inline void acpi_table_upgrade(void) { } #endif #ifdef CONFIG_ACPI ... void acpi_boot_table_init (void); ... #else /* !CONFIG_ACPI */ ... static inline void acpi_boot_table_init(void) { } ... #endif /* !CONFIG_ACPI */ As Huacai suggested, CONFIG_ACPI_TABLE_UPGRADE is ugly and not necessary here, just remove it. At the same time, just keep CONFIG_ACPI to prevent potential build errors in future, and give a signal to indicate the code is ACPI-specific. For the same reason, we also put acpi_table_upgrade() under CONFIG_ACPI. Signed-off-by: Tiezhu Yang Signed-off-by: Huacai Chen