kernel.git/arch/loongarch/kernel/setup.c, branch linux-6.10.y

LoongArch: Fix built-in DTB detection

2024-06-03T07:45:53Z

fdt_check_header(__dtb_start) will always success because kernel provides a dummy dtb, and by coincidence __dtb_start clashed with entry of this dummy dtb. The consequence is fdt passed from firmware will never be taken. Fix by trying to utilise __dtb_start only when CONFIG_BUILTIN_DTB is enabled. Cc: stable@vger.kernel.org Fixes: 7b937cc243e5 ("of: Create of_root if no dtb provided by firmware") Signed-off-by: Jiaxun Yang Signed-off-by: Huacai Chen

LoongArch: Remove CONFIG_ACPI_TABLE_UPGRADE in platform_init()

2024-06-03T07:45:53Z

Both acpi_table_upgrade() and acpi_boot_table_init() are defined as empty functions under !CONFIG_ACPI_TABLE_UPGRADE and !CONFIG_ACPI in include/linux/acpi.h, there are no implicit declaration errors with various configs. #ifdef CONFIG_ACPI_TABLE_UPGRADE void acpi_table_upgrade(void); #else static inline void acpi_table_upgrade(void) { } #endif #ifdef CONFIG_ACPI ... void acpi_boot_table_init (void); ... #else /* !CONFIG_ACPI */ ... static inline void acpi_boot_table_init(void) { } ... #endif /* !CONFIG_ACPI */ As Huacai suggested, CONFIG_ACPI_TABLE_UPGRADE is ugly and not necessary here, just remove it. At the same time, just keep CONFIG_ACPI to prevent potential build errors in future, and give a signal to indicate the code is ACPI-specific. For the same reason, we also put acpi_table_upgrade() under CONFIG_ACPI. Signed-off-by: Tiezhu Yang Signed-off-by: Huacai Chen

Merge tag 'loongarch-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

2024-03-22T17:22:45Z

Pull LoongArch updates from Huacai Chen: - Add objtool support for LoongArch - Add ORC stack unwinder support for LoongArch - Add kernel livepatching support for LoongArch - Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig - Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig - Some bug fixes and other small changes * tag 'loongarch-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch/crypto: Clean up useless assignment operations LoongArch: Define the __io_aw() hook as mmiowb() LoongArch: Remove superfluous flush_dcache_page() definition LoongArch: Move {dmw,tlb}_virt_to_page() definition to page.h LoongArch: Change __my_cpu_offset definition to avoid mis-optimization LoongArch: Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig LoongArch: Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig LoongArch: Add kernel livepatching support LoongArch: Add ORC stack unwinder support objtool: Check local label in read_unwind_hints() objtool: Check local label in add_dead_ends() objtool/LoongArch: Enable orc to be built objtool/x86: Separate arch-specific and generic parts objtool/LoongArch: Implement instruction decoder objtool/LoongArch: Enable objtool to be built

Merge tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2024-03-15T00:43:30Z

Pull MM updates from Andrew Morton: - Sumanth Korikkar has taught s390 to allocate hotplug-time page frames from hotplugged memory rather than only from main memory. Series "implement "memmap on memory" feature on s390". - More folio conversions from Matthew Wilcox in the series "Convert memcontrol charge moving to use folios" "mm: convert mm counter to take a folio" - Chengming Zhou has optimized zswap's rbtree locking, providing significant reductions in system time and modest but measurable reductions in overall runtimes. The series is "mm/zswap: optimize the scalability of zswap rb-tree". - Chengming Zhou has also provided the series "mm/zswap: optimize zswap lru list" which provides measurable runtime benefits in some swap-intensive situations. - And Chengming Zhou further optimizes zswap in the series "mm/zswap: optimize for dynamic zswap_pools". Measured improvements are modest. - zswap cleanups and simplifications from Yosry Ahmed in the series "mm: zswap: simplify zswap_swapoff()". - In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has contributed several DAX cleanups as well as adding a sysfs tunable to control the memmap_on_memory setting when the dax device is hotplugged as system memory. - Johannes Weiner has added the large series "mm: zswap: cleanups", which does that. - More DAMON work from SeongJae Park in the series "mm/damon: make DAMON debugfs interface deprecation unignorable" "selftests/damon: add more tests for core functionalities and corner cases" "Docs/mm/damon: misc readability improvements" "mm/damon: let DAMOS feeds and tame/auto-tune itself" - In the series "mm/mempolicy: weighted interleave mempolicy and sysfs extension" Rakie Kim has developed a new mempolicy interleaving policy wherein we allocate memory across nodes in a weighted fashion rather than uniformly. This is beneficial in heterogeneous memory environments appearing with CXL. - Christophe Leroy has contributed some cleanup and consolidation work against the ARM pagetable dumping code in the series "mm: ptdump: Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute". - Luis Chamberlain has added some additional xarray selftesting in the series "test_xarray: advanced API multi-index tests". - Muhammad Usama Anjum has reworked the selftest code to make its human-readable output conform to the TAP ("Test Anything Protocol") format. Amongst other things, this opens up the use of third-party tools to parse and process out selftesting results. - Ryan Roberts has added fork()-time PTE batching of THP ptes in the series "mm/memory: optimize fork() with PTE-mapped THP". Mainly targeted at arm64, this significantly speeds up fork() when the process has a large number of pte-mapped folios. - David Hildenbrand also gets in on the THP pte batching game in his series "mm/memory: optimize unmap/zap with PTE-mapped THP". It implements batching during munmap() and other pte teardown situations. The microbenchmark improvements are nice. - And in the series "Transparent Contiguous PTEs for User Mappings" Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte mappings"). Kernel build times on arm64 improved nicely. Ryan's series "Address some contpte nits" provides some followup work. - In the series "mm/hugetlb: Restore the reservation" Breno Leitao has fixed an obscure hugetlb race which was causing unnecessary page faults. He has also added a reproducer under the selftest code. - In the series "selftests/mm: Output cleanups for the compaction test", Mark Brown did what the title claims. - Kinsey Ho has added the series "mm/mglru: code cleanup and refactoring". - Even more zswap material from Nhat Pham. The series "fix and extend zswap kselftests" does as claimed. - In the series "Introduce cpu_dcache_is_aliasing() to fix DAX regression" Mathieu Desnoyers has cleaned up and fixed rather a mess in our handling of DAX on archiecctures which have virtually aliasing data caches. The arm architecture is the main beneficiary. - Lokesh Gidra's series "per-vma locks in userfaultfd" provides dramatic improvements in worst-case mmap_lock hold times during certain userfaultfd operations. - Some page_owner enhancements and maintenance work from Oscar Salvador in his series "page_owner: print stacks and their outstanding allocations" "page_owner: Fixup and cleanup" - Uladzislau Rezki has contributed some vmalloc scalability improvements in his series "Mitigate a vmap lock contention". It realizes a 12x improvement for a certain microbenchmark. - Some kexec/crash cleanup work from Baoquan He in the series "Split crash out from kexec and clean up related config items". - Some zsmalloc maintenance work from Chengming Zhou in the series "mm/zsmalloc: fix and optimize objects/page migration" "mm/zsmalloc: some cleanup for get/set_zspage_mapping()" - Zi Yan has taught the MM to perform compaction on folios larger than order=0. This a step along the path to implementaton of the merging of large anonymous folios. The series is named "Enable >0 order folio memory compaction". - Christoph Hellwig has done quite a lot of cleanup work in the pagecache writeback code in his series "convert write_cache_pages() to an iterator". - Some modest hugetlb cleanups and speedups in Vishal Moola's series "Handle hugetlb faults under the VMA lock". - Zi Yan has changed the page splitting code so we can split huge pages into sizes other than order-0 to better utilize large folios. The series is named "Split a folio to any lower order folios". - David Hildenbrand has contributed the series "mm: remove total_mapcount()", a cleanup. - Matthew Wilcox has sought to improve the performance of bulk memory freeing in his series "Rearrange batched folio freeing". - Gang Li's series "hugetlb: parallelize hugetlb page init on boot" provides large improvements in bootup times on large machines which are configured to use large numbers of hugetlb pages. - Matthew Wilcox's series "PageFlags cleanups" does that. - Qi Zheng's series "minor fixes and supplement for ptdesc" does that also. S390 is affected. - Cleanups to our pagemap utility functions from Peter Xu in his series "mm/treewide: Replace pXd_large() with pXd_leaf()". - Nico Pache has fixed a few things with our hugepage selftests in his series "selftests/mm: Improve Hugepage Test Handling in MM Selftests". - Also, of course, many singleton patches to many things. Please see the individual changelogs for details. * tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits) mm/zswap: remove the memcpy if acomp is not sleepable crypto: introduce: acomp_is_async to expose if comp drivers might sleep memtest: use {READ,WRITE}_ONCE in memory scanning mm: prohibit the last subpage from reusing the entire large folio mm: recover pud_leaf() definitions in nopmd case selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements selftests/mm: skip uffd hugetlb tests with insufficient hugepages selftests/mm: dont fail testsuite due to a lack of hugepages mm/huge_memory: skip invalid debugfs new_order input for folio split mm/huge_memory: check new folio order when split a folio mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure mm: add an explicit smp_wmb() to UFFDIO_CONTINUE mm: fix list corruption in put_pages_list mm: remove folio from deferred split list before uncharging it filemap: avoid unnecessary major faults in filemap_fault() mm,page_owner: drop unnecessary check mm,page_owner: check for null stack_record before bumping its refcount mm: swap: fix race between free_swap_and_cache() and swapoff() mm/treewide: align up pXd_leaf() retval across archs mm/treewide: drop pXd_large() ...

mm: Introduce vmap_page_range() to map pages in PCI address space

2024-03-11T15:58:10Z

ioremap_page_range() should be used for ranges within vmalloc range only. The vmalloc ranges are allocated by get_vm_area(). PCI has "resource" allocator that manages PCI_IOBASE, IO_SPACE_LIMIT address range, hence introduce vmap_page_range() to be used exclusively to map pages in PCI address space. Fixes: 3e49a866c9dc ("mm: Enforce VM_IOREMAP flag and range in ioremap_page_range.") Reported-by: Miguel Ojeda Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann Reviewed-by: Christoph Hellwig Tested-by: Miguel Ojeda Link: https://lore.kernel.org/bpf/CANiq72ka4rir+RTN2FQoT=Vvprp_Ao-CvoYEkSNqtSY+RZj+AA@mail.gmail.com

LoongArch: Add ORC stack unwinder support

2024-03-11T14:23:47Z

The kernel CONFIG_UNWINDER_ORC option enables the ORC unwinder, which is similar in concept to a DWARF unwinder. The difference is that the format of the ORC data is much simpler than DWARF, which in turn allows the ORC unwinder to be much simpler and faster. The ORC data consists of unwind tables which are generated by objtool. After analyzing all the code paths of a .o file, it determines information about the stack state at each instruction address in the file and outputs that information to the .orc_unwind and .orc_unwind_ip sections. The per-object ORC sections are combined at link time and are sorted and post-processed at boot time. The unwinder uses the resulting data to correlate instruction addresses with their stack states at run time. Most of the logic are similar with x86, in order to get ra info before ra is saved into stack, add ra_reg and ra_offset into orc_entry. At the same time, modify some arch-specific code to silence the objtool warnings. Co-developed-by: Jinyang He Signed-off-by: Jinyang He Co-developed-by: Youling Tang Signed-off-by: Youling Tang Signed-off-by: Tiezhu Yang Signed-off-by: Huacai Chen

loongarch, crash: wrap crash dumping code into crash related ifdefs

2024-02-24T01:48:24Z

Now crash codes under kernel/ folder has been split out from kexec code, crash dumping can be separated from kexec reboot in config items on loongarch with some adjustments. Here use IS_ENABLED(CONFIG_CRASH_RESERVE) check to decide if compiling in the crashkernel reservation code. Link: https://lkml.kernel.org/r/20240124051254.67105-15-bhe@redhat.com Signed-off-by: Baoquan He Cc: Al Viro Cc: Eric W. Biederman Cc: Hari Bathini Cc: Pingfan Liu Cc: Klara Modin Cc: Michael Kelley Cc: Nathan Chancellor Cc: Stephen Rothwell Cc: Yang Li Signed-off-by: Andrew Morton

LoongArch: Call early_init_fdt_scan_reserved_mem() earlier

2024-02-23T06:36:31Z

The unflatten_and_copy_device_tree() function contains a call to memblock_alloc(). This means that memblock is allocating memory before any of the reserved memory regions are set aside in the arch_mem_init() function which calls early_init_fdt_scan_reserved_mem(). Therefore, there is a possibility for memblock to allocate from any of the reserved memory regions. Hence, move the call to early_init_fdt_scan_reserved_mem() to be earlier in the init sequence, so that the reserved memory regions are set aside before any allocations are done using memblock. Cc: stable@vger.kernel.org Fixes: 88d4d957edc707e ("LoongArch: Add FDT booting support from efi system table") Signed-off-by: Oreoluwa Babatunde Signed-off-by: Huacai Chen

LoongArch: Use generic interface to support crashkernel=X,[high,low]

2024-01-17T04:43:08Z

LoongArch already supports two crashkernel regions in kexec-tools, so we can directly use the common interface to support crashkernel=X,[high,low] after commit 0ab97169aa0517079b ("crash_core: add generic function to do reservation"). With the help of newly changed function parse_crashkernel() and generic reserve_crashkernel_generic(), crashkernel reservation can be simplified by steps: 1) Add a new header file , then define CRASH_ALIGN, CRASH_ADDR_LOW_MAX and CRASH_ADDR_HIGH_MAX and in ; 2) Add arch_reserve_crashkernel() to call parse_crashkernel() and reserve_crashkernel_generic(); 3) Add ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION Kconfig in arch/loongarch/Kconfig. One can reserve the crash kernel from high memory above DMA zone range by explicitly passing "crashkernel=X,high"; or reserve a memory range below 4G with "crashkernel=X,low". Besides, there are few rules need to take notice: 1) "crashkernel=X,[high,low]" will be ignored if "crashkernel=size" is specified. 2) "crashkernel=X,low" is valid only when "crashkernel=X,high" is passed and there is enough memory to be allocated under 4G. 3) When allocating crashkernel above 4G and no "crashkernel=X,low" is specified, a 128M low memory will be allocated automatically for swiotlb bounce buffer. See Documentation/admin-guide/kernel-parameters.txt for more information. Following test cases have been performed as expected: 1) crashkernel=256M //low=256M 2) crashkernel=1G //low=1G 3) crashkernel=4G //high=4G, low=128M(default) 4) crashkernel=4G crashkernel=256M,high //high=4G, low=128M(default), high is ignored 5) crashkernel=4G crashkernel=256M,low //high=4G, low=128M(default), low is ignored 6) crashkernel=4G,high //high=4G, low=128M(default) 7) crashkernel=256M,low //low=0M, invalid 8) crashkernel=4G,high crashkernel=256M,low //high=4G, low=256M 9) crashkernel=4G,high crashkernel=4G,low //high=0M, low=0M, invalid 10) crashkernel=512M@2560M //low=512M 11) crashkernel=1G,high crashkernel=0M,low //high=1G, low=0M Recommended usage in general: 1) In the case of small memory: crashkernel=512M 2) In the case of large memory: crashkernel=1024M,high crashkernel=128M,low Signed-off-by: Youling Tang Signed-off-by: Huacai Chen

LoongArch: Allow device trees be built into the kernel

2024-01-17T04:43:00Z

During the upstream progress of those DT-based drivers, DT properties are changed a lot so very different from those in existing bootloaders. It is inevitably that some existing systems do not provide a standard, canonical device tree to the kernel at boot time. So let's provide a device tree table in the kernel, keyed by the dts filename, containing the relevant DTBs. We can use the built-in dts files as references. Each SoC has only one built-in dts file which describes all possible device information of that SoC, so the dts files are good examples during development. And as a reference, our built-in dts file only enables the most basic bootable combinations (so it is generic enough), acts as an alternative in case the dts in the bootloader is unexpected. Signed-off-by: Binbin Zhou Signed-off-by: Huacai Chen