Hosts the 0x221E linux distro kernel. https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-6.10.y 2024-06-03T07:45:53Z 2024-06-03T07:45:53Z Jiaxun Yang 2024-06-03T07:45:53Z urn:sha1:beb2800074c15362cf9f6c7301120910046d6556 Currently kernel entry in head.S is in DMW address range, firmware is instructed to jump to this address after loading the kernel image. However kernel should not make any assumption on firmware's DMW setting, thus the entry point should be a physical address falls into direct translation region. Fix by converting entry address to physical and amend entry calculation logic in libstub accordingly. BTW, use ABSOLUTE() to calculate variables to make Clang/LLVM happy. Cc: stable@vger.kernel.org Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 2024-01-19T21:30:49Z Linus Torvalds 2024-01-19T21:30:49Z urn:sha1:24fdd5189914b36102cb51626a890a2d84501993 Pull LoongArch updates from Huacai Chen: - Raise minimum clang version to 18.0.0 - Enable initial Rust support for LoongArch - Add built-in dtb support for LoongArch - Use generic interface to support crashkernel=X,[high,low] - Some bug fixes and other small changes - Update the default config file. * tag 'loongarch-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (22 commits) MAINTAINERS: Add BPF JIT for LOONGARCH entry LoongArch: Update Loongson-3 default config file LoongArch: BPF: Prevent out-of-bounds memory access LoongArch: BPF: Support 64-bit pointers to kfuncs LoongArch: Fix definition of ftrace_regs_set_instruction_pointer() LoongArch: Use generic interface to support crashkernel=X,[high,low] LoongArch: Fix and simplify fcsr initialization on execve() LoongArch: Let cores_io_master cover the largest NR_CPUS LoongArch: Change SHMLBA from SZ_64K to PAGE_SIZE LoongArch: Add a missing call to efi_esrt_init() LoongArch: Parsing CPU-related information from DTS LoongArch: dts: DeviceTree for Loongson-2K2000 LoongArch: dts: DeviceTree for Loongson-2K1000 LoongArch: dts: DeviceTree for Loongson-2K0500 LoongArch: Allow device trees be built into the kernel dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for interrupt-names dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for reg-names dt-bindings: loongarch: Add Loongson SoC boards compatibles dt-bindings: loongarch: Add CPU bindings for LoongArch LoongArch: Enable initial Rust support ... 2024-01-17T04:43:08Z Huacai Chen 2024-01-17T04:43:08Z urn:sha1:d23b77953f5a4fbf94c05157b186aac2a247ae32 LoongArch has hardware page coloring for L1 Cache, so we don't have cache aliases. But SFB (Store Fill Buffer) still has aliases. So we define SHMLBA to SZ_64K previously. But there are losts of applications use PAGE_SIZE rather than SHMLBA to mmap() file pages and shared pages. Of course we can fix them one by one, but not easy. On the other hand, we can simply disable SFB for 4KB page size to fix cache alias (there will be performance decrease, but acceptable), and in future we will fix SFB in hardware. So we can safely define SHMLBA to PAGE_SIZE (use the generic shmparam.h) to make life easier. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 2023-12-19T10:16:37Z Wang Yao 2023-12-19T09:14:05Z urn:sha1:174a0c565cea74a7811ff79fbee1b70247570ade The use of the 'kernel_offset' variable to position the image file that has been loaded by UEFI or GRUB is unnecessary, because we can directly position the loaded image file through using the image_base field of the efi_loaded_image struct provided by UEFI. Replace kernel_offset with image_base to position the image file that has been loaded by UEFI or GRUB. Signed-off-by: Wang Yao <wangyao@lemote.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> 2023-09-06T14:54:16Z Qing Zhang 2023-09-06T14:54:16Z urn:sha1:5aa4ac64e6add3e40d5049e31275b2822daf885d 1/8 of kernel addresses reserved for shadow memory. But for LoongArch, There are a lot of holes between different segments and valid address space (256T available) is insufficient to map all these segments to kasan shadow memory with the common formula provided by kasan core, saying (addr >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET So LoongArch has a arch-specific mapping formula, different segments are mapped individually, and only limited space lengths of these specific segments are mapped to shadow. At early boot stage the whole shadow region populated with just one physical page (kasan_early_shadow_page). Later, this page is reused as readonly zero shadow for some memory that kasan currently don't track. After mapping the physical memory, pages for shadow memory are allocated and mapped. Functions like memset()/memcpy()/memmove() do a lot of memory accesses. If bad pointer passed to one of these function it is important to be caught. Compiler's instrumentation cannot do this since these functions are written in assembly. KASan replaces memory functions with manually instrumented variants. Original functions declared as weak symbols so strong definitions in mm/kasan/kasan.c could replace them. Original functions have aliases with '__' prefix in names, so we could call non-instrumented variant if needed. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 2023-09-06T14:54:16Z Qing Zhang 2023-09-06T14:54:16Z urn:sha1:9fbcc076798ead2af28c854a265d9da83bec8429 Modified relocate_kernel() doesn't return new kernel's entry point but the random_offset. In this way we share the start_kernel() processing with the normal kernel, which avoids calling 'jr a0' directly and allows some other operations (e.g, kasan_early_init) before start_kernel() when KASLR (CONFIG_RANDOMIZE_BASE) is turned on. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 2023-06-29T12:58:42Z WANG Rui 2023-06-29T12:58:42Z urn:sha1:414cefc798a30895d61e9d5b010fcf350af782d6 Taking the address delta between symbols in different sections is not supported by the LLVM IAS. Instead, do this in the linker script, so the same data can be properly referenced in assembly. Signed-off-by: WANG Rui <wangrui@loongson.cn> Signed-off-by: WANG Xuerui <git@xen0n.name> [chenhuacai: Fix build with !CONFIG_EFI_STUB] Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 2023-02-25T14:12:17Z Youling Tang 2023-02-25T07:52:56Z urn:sha1:3f89765d6227fe4645a91e062332b6b4eb24072c This feature depends on the kernel being relocatable. Enable using single kernel image for kdump, and then no longer need to build two kernels (production kernel and capture kernel share a single kernel image). Also enable CONFIG_CRASH_DUMP in loongson3_defconfig. Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 2023-02-25T14:12:17Z Youling Tang 2023-02-25T07:52:56Z urn:sha1:e5f02b51fa0cb785e352e77271a65e96051b789b This patch adds support for relocating the kernel to a random address. Entropy is derived from the banner, which will change every build and random_get_entropy() which should provide additional runtime entropy. The kernel is relocated by up to RANDOMIZE_BASE_MAX_OFFSET bytes from its link address. Because relocation happens so early during the kernel booting, the amount of physical memory has not yet been determined. This means the only way to limit relocation within the available memory is via Kconfig. So we limit the maximum value of RANDOMIZE_BASE_MAX_OFFSET to 256M (0x10000000) because our memory layout has many holes. Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Xi Ruoyao <xry111@xry111.site> # Fix compiler warnings Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 2023-02-25T14:12:16Z Youling Tang 2023-02-25T07:52:56Z urn:sha1:d8da19fbdedd5852592fbba18a7348e3f09500e6 This config allows to compile kernel as PIE and to relocate it at any virtual address at runtime: this paves the way to KASLR. Runtime relocation is possible since relocation metadata are embedded into the kernel. Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Xi Ruoyao <xry111@xry111.site> # Use arch_initcall Signed-off-by: Jinyang He <hejinyang@loongson.cn> # Provide la_abs relocation code Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>