kernel.git/arch/ia64/kernel/acpi.c, branch linux-3.1.y

Merge branch 'misc' into release

2011-03-23T06:19:58Z

ACPI: use __cpuinit for the acpi_processor_set_pdc() call tree

2011-03-03T01:58:20Z

Once acpi_map_lsapic() in ia64 follows how x86 treats it wrt section placement, the whole tree from acpi_processor_set_pdc() can become __cpuinit. Signed-off-by: Jan Beulich Acked-by: Tony Luck Signed-off-by: Len Brown

ACPI / PM: Merge do_suspend_lowlevel() into acpi_save_state_mem()

2011-02-24T18:58:54Z

The function do_suspend_lowlevel() is specific to x86 and defined in assembly code, so it should be called from the x86 low-level suspend code rather than from acpi_suspend_enter(). Merge do_suspend_lowlevel() into the x86's acpi_save_state_mem() and change the name of the latter to acpi_suspend_lowlevel(), so that the function's purpose is better reflected by its name. Signed-off-by: Rafael J. Wysocki

ACPI / PM: Drop acpi_restore_state_mem()

2011-02-24T18:58:54Z

The function acpi_restore_state_mem() has never been and most likely never will be used, so remove it. Signed-off-by: Rafael J. Wysocki

[IA64] Fix format warning in arch/ia64/kernel/acpi.c

2011-01-12T19:02:43Z

arch/ia64/kernel/acpi.c:481: warning: format ‘%d’ expects type ‘int’, but argument 2 has type ‘long unsigned int’ Introduced by commit 05f2f274c8a8747bbfb13ac8ee0c27d5f2ad8510 [IA64] Avoid array overflow if there are too many cpus in SRAT table Signed-off-by: Tony Luck

[IA64] Avoid array overflow if there are too many cpus in SRAT table

2011-01-07T17:11:55Z

acpi_numa_init() has to parse the whole SRAT table, even if the kernel wants to limit the number of cpus it will use (because the ones it is going to use may be described by entries at the end of the SRAT table). Avoid overflowing the node_cpuid array. Reported-by: Yinghai Lu Signed-off-by: Tony Luck

x86, acpi/irq: Introduce apci_isa_irq_to_gsi

2010-05-04T20:34:23Z

There are a number of cases where the current code makes the assumption that isa irqs identity map to the first 16 acpi global system intereupts. In most instances that assumption is correct as that is the required behaviour in dual i8259 mode and the default behavior in ioapic mode. However there are some systems out there that take advantage of acpis interrupt remapping for the isa irqs to have a completely different mapping of isa_irq to gsi. Introduce acpi_isa_irq_to_gsi to perform this mapping explicitly in the code that needs it. Initially this will be just the current assumed identity mapping to ensure it's introduction does not cause regressions. Signed-off-by: Eric W. Biederman LKML-Reference: <1269936436-7039-1-git-send-email-ebiederm@xmission.com> Signed-off-by: H. Peter Anvin

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

ACPI: processor: driver doesn't need to evaluate _PDC

2010-03-15T01:17:22Z

Now that the early _PDC evaluation path knows how to correctly evaluate _PDC on only physically present processors, there's no need for the processor driver to evaluate it later when it loads. To cover the hotplug case, push _PDC evaluation down into the hotplug paths. Cc: x86@kernel.org Cc: Tony Luck Acked-by: Venkatesh Pallipadi Signed-off-by: Alex Chiang Signed-off-by: Len Brown

Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

2010-03-03T16:15:37Z

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (25 commits) x86: Fix out of order of gsi x86: apic: Fix mismerge, add arch_probe_nr_irqs() again x86, irq: Keep chip_data in create_irq_nr and destroy_irq xen: Remove unnecessary arch specific xen irq functions. smp: Use nr_cpus= to set nr_cpu_ids early x86, irq: Remove arch_probe_nr_irqs sparseirq: Use radix_tree instead of ptrs array sparseirq: Change irq_desc_ptrs to static init: Move radix_tree_init() early irq: Remove unnecessary bootmem code x86: Add iMac9,1 to pci_reboot_dmi_table x86: Convert i8259_lock to raw_spinlock x86: Convert nmi_lock to raw_spinlock x86: Convert ioapic_lock and vector_lock to raw_spinlock x86: Avoid race condition in pci_enable_msix() x86: Fix SCI on IOAPIC != 0 x86, ia32_aout: do not kill argument mapping x86, irq: Move __setup_vector_irq() before the first irq enable in cpu online path x86, irq: Update the vector domain for legacy irqs handled by io-apic x86, irq: Don't block IRQ0_VECTOR..IRQ15_VECTOR's on all cpu's ...