kernel.git/arch/hexagon/kernel/traps.c, branch linux-6.4.y

ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h

2022-03-10T19:35:08Z

Rename tracehook_report_syscall_{entry,exit} to ptrace_report_syscall_{entry,exit} and place them in ptrace.h There is no longer any generic tracehook infractructure so make these ptrace specific functions ptrace specific. Reviewed-by: Kees Cook Link: https://lkml.kernel.org/r/20220309162454.123006-3-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman"

hexagon: Fix function name in die()

2022-01-08T15:42:15Z

When building ARCH=hexagon defconfig: arch/hexagon/kernel/traps.c:217:2: error: implicit declaration of function 'make_dead_task' [-Werror,-Wimplicit-function-declaration] make_dead_task(err); ^ The function's name is make_task_dead(), change it so there is no more build error. Fixes: 0e25498f8cd4 ("exit: Add and use make_task_dead.") Signed-off-by: Nathan Chancellor Link: https://lkml.kernel.org/r/20211227184851.2297759-2-nathan@kernel.org Signed-off-by: Eric W. Biederman

exit: Add and use make_task_dead.

2021-12-13T18:04:45Z

There are two big uses of do_exit. The first is it's design use to be the guts of the exit(2) system call. The second use is to terminate a task after something catastrophic has happened like a NULL pointer in kernel code. Add a function make_task_dead that is initialy exactly the same as do_exit to cover the cases where do_exit is called to handle catastrophic failure. In time this can probably be reduced to just a light wrapper around do_task_dead. For now keep it exactly the same so that there will be no behavioral differences introducing this new concept. Replace all of the uses of do_exit that use it for catastraphic task cleanup with make_task_dead to make it clear what the code is doing. As part of this rename rewind_stack_do_exit rewind_stack_and_make_dead. Signed-off-by: "Eric W. Biederman"

trap: cleanup trap_init()

2021-09-08T18:50:27Z

There are some empty trap_init() definitions in different ARCHs, Introduce a new weak trap_init() function to clean them up. Link: https://lkml.kernel.org/r/20210812123602.76356-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang Acked-by: Russell King (Oracle) [arm32] Acked-by: Vineet Gupta [arc] Acked-by: Michael Ellerman [powerpc] Cc: Yoshinori Sato Cc: Ley Foon Tan Cc: Jonas Bonn Cc: Stefan Kristiansson Cc: Stafford Horne Cc: James E.J. Bottomley Cc: Helge Deller Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Paul Walmsley Cc: Jeff Dike Cc: Richard Weinberger Cc: Anton Ivanov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

kernel: rename show_stack_loglvl() => show_stack()

2020-06-09T16:39:13Z

Now the last users of show_stack() got converted to use an explicit log level, show_stack_loglvl() can drop it's redundant suffix and become once again well known show_stack(). Signed-off-by: Dmitry Safonov Signed-off-by: Andrew Morton Link: http://lkml.kernel.org/r/20200418201944.482088-51-dima@arista.com Signed-off-by: Linus Torvalds

hexagon: add show_stack_loglvl()

2020-06-09T16:39:11Z

Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Introduce show_stack_loglvl(), that eventually will substitute show_stack(). As a good side-effect die() now prints the stacktrace with KERN_EMERG aligned with other messages. [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u Signed-off-by: Dmitry Safonov Signed-off-by: Andrew Morton Acked-by: Brian Cain Link: http://lkml.kernel.org/r/20200418201944.482088-15-dima@arista.com Signed-off-by: Linus Torvalds

Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2019-07-09T04:48:15Z

Pull force_sig() argument change from Eric Biederman: "A source of error over the years has been that force_sig has taken a task parameter when it is only safe to use force_sig with the current task. The force_sig function is built for delivering synchronous signals such as SIGSEGV where the userspace application caused a synchronous fault (such as a page fault) and the kernel responded with a signal. Because the name force_sig does not make this clear, and because the force_sig takes a task parameter the function force_sig has been abused for sending other kinds of signals over the years. Slowly those have been fixed when the oopses have been tracked down. This set of changes fixes the remaining abusers of force_sig and carefully rips out the task parameter from force_sig and friends making this kind of error almost impossible in the future" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits) signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus signal: Remove the signal number and task parameters from force_sig_info signal: Factor force_sig_info_to_task out of force_sig_info signal: Generate the siginfo in force_sig signal: Move the computation of force into send_signal and correct it. signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal signal: Remove the task parameter from force_sig_fault signal: Use force_sig_fault_to_task for the two calls that don't deliver to current signal: Explicitly call force_sig_fault on current signal/unicore32: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from ptrace_break signal/nds32: Remove tsk parameter from send_sigtrap signal/riscv: Remove tsk parameter from do_trap signal/sh: Remove tsk parameter from force_sig_info_fault signal/um: Remove task parameter from send_sigtrap signal/x86: Remove task parameter from send_sigtrap signal: Remove task parameter from force_sig_mceerr signal: Remove task parameter from force_sig signal: Remove task parameter from force_sigsegv ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 267

2019-06-05T15:30:29Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 94 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Richard Fontana Reviewed-by: Alexios Zavras Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141334.043630402@linutronix.de Signed-off-by: Greg Kroah-Hartman

signal: Remove the task parameter from force_sig_fault

2019-05-29T14:31:43Z

As synchronous exceptions really only make sense against the current task (otherwise how are you synchronous) remove the task parameter from from force_sig_fault to make it explicit that is what is going on. The two known exceptions that deliver a synchronous exception to a stopped ptraced task have already been changed to force_sig_fault_to_task. The callers have been changed with the following emacs regular expression (with obvious variations on the architectures that take more arguments) to avoid typos: force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)] -> force_sig_fault(\1,\2,\3) Signed-off-by: "Eric W. Biederman"

signal: Remove task parameter from force_sig

2019-05-27T14:36:28Z

All of the remaining callers pass current into force_sig so remove the task parameter to make this obvious and to make misuse more difficult in the future. This also makes it clear force_sig passes current into force_sig_info. Signed-off-by: "Eric W. Biederman"