kernel.git/arch/arm64, branch linux-5.13.y

arm64: dts: ls1046a: fix eeprom entries

2021-09-18T11:42:12Z

[ Upstream commit c1a6018d1839c9cb8f807dc863a50102a1a5c412 ] ls1046afrwy and ls1046ardb boards have CAT24C04[1] and CAT24C05[2] eeproms respectively. Both are 4Kb (512 bytes) in size, and compatible with AT24C04[3]. Remove multi-address entries, as both the boards have a single chip each. [1] https://www.onsemi.com/pdf/datasheet/cat24c01-d.pdf [2] https://www.onsemi.com/pdf/datasheet/cat24c03-d.pdf [3] https://ww1.microchip.com/downloads/en/DeviceDoc/doc0180.pdf Signed-off-by: Raag Jadav Acked-by: Li Yang Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

arm64: dts: imx8mm-venice-gw71xx: fix USB OTG VBUS

2021-09-18T11:42:12Z

[ Upstream commit bd306fdb4e60bcb1d7ea5431a74092803d3784a6 ] The GW71xx has a USB Type-C connector with USB 2.0 signaling. GPIO1_12 is the power-enable to the TPS25821 Source controller and power switch responsible for monitoring the CC pins and enabling VBUS. Therefore GPIO1_12 must always be enabled and the vbus output enable from the IMX8MM can be ignored. To fix USB OTG VBUS enable a pull-up on GPIO1_12 to always power the TPS25821 and change the regulator output to GPIO1_10 which is unconnected. Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

arm64: dts: imx8mm-venice-gw700x: fix invalid pmic pin config

2021-09-18T11:42:12Z

[ Upstream commit 500659f3b401fe6ffd1d63f2449d16d8a4204db7 ] The GW700x PMIC does not have an interrupt. Remove the invalid pin config. Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

arm64: dts: imx8mm-venice-gw700x: fix mp5416 pmic config

2021-09-18T11:42:12Z

[ Upstream commit 092cd75e527044050ea76bf774e7d730709b7e8b ] Fix various MP5416 PMIC configurations: - Update regulator names per dt-bindings - ensure values fit among valid register values - add required regulator-max-microamp property - add regulator-always-on prop Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

arm64: tegra: Fix compatible string for Tegra132 CPUs

2021-09-18T11:42:11Z

[ Upstream commit f865d0292ff3c0ca09414436510eb4c815815509 ] The documented compatible string for the CPUs found on Tegra132 is "nvidia,tegra132-denver", rather than the previously used compatible string "nvidia,denver". Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin

arm64: dts: qcom: sm8250: Fix epss_l3 unit address

2021-09-18T11:42:09Z

[ Upstream commit 77b53d65dc1e54321ec841912f06bcb558a079c0 ] The unit address of the epss_l3 node is incorrect and does not match the address of its "reg" property. Let's fix it. Signed-off-by: Georgi Djakov Reviewed-by: Dmitry Baryshkov Reviewed-by: Sibi Sankar Link: https://lore.kernel.org/r/20210211193637.9737-1-georgi.djakov@linaro.org Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

arm64: dts: qcom: msm8996: don't use underscore in node name

2021-09-18T11:42:09Z

[ Upstream commit 84f3efbe5b4654077608bc2fc027177fe4592321 ] We have underscore (_) in node name leading to warning: arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: clocks: xo_board: {'type': 'object'} is not allowed for {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[19200000]], 'clock-output-names': ['xo_board'], 'phandle': [[115]]} Fix this by changing node name to use dash (-) Signed-off-by: Vinod Koul Link: https://lore.kernel.org/r/20210308060826.3074234-10-vkoul@kernel.org Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

arm64: dts: qcom: msm8994: don't use underscore in node name

2021-09-18T11:42:09Z

[ Upstream commit 8c678beca7ed3fa8a2c6d86f6603bc23400f9ad8 ] We have underscore (_) in node name leading to warning: arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dt.yaml: clocks: xo_board: {'type': 'object'} is not allowed for {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[19200000]], 'phandle': [[26]]} arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dt.yaml: clocks: sleep_clk: {'type': 'object'} is not allowed for {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[32768]]} Fix this by changing node name to use dash (-) Signed-off-by: Vinod Koul Link: https://lore.kernel.org/r/20210308060826.3074234-9-vkoul@kernel.org [bjorn: Added clock-output-names to satisfy parent_names] Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

arm64: dts: qcom: sdm630: don't use underscore in node name

2021-09-18T11:42:08Z

[ Upstream commit 639dfdbecd88ec05bda87b1d5d419afad50af21c ] We have underscore (_) in node name so fix that up as well. Fix this by changing node name to use dash (-) Signed-off-by: Vinod Koul Link: https://lore.kernel.org/r/20210308060826.3074234-11-vkoul@kernel.org Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

arm64: dts: qcom: ipq6018: drop '0x' from unit address

2021-09-18T11:42:08Z

[ Upstream commit 1b91b8ef60e9a67141e66af3cca532c00f4605fe ] Nodes need not contain '0x' for the unit address. Drop it to fix the below warning: arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml: reserved-memory: 'memory@0x60000' does not match any of the regexes Signed-off-by: Vinod Koul Link: https://lore.kernel.org/r/20210308060826.3074234-19-vkoul@kernel.org Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin