kernel.git/arch/arm64/mm/init.c, branch linux-5.12.y

arm64/mm: Reorganize pfn_valid()

2021-03-08T18:04:00Z

There are multiple instances of pfn_to_section_nr() and __pfn_to_section() when CONFIG_SPARSEMEM is enabled. This can be optimized if memory section is fetched earlier. This replaces the open coded PFN and ADDR conversion with PFN_PHYS() and PHYS_PFN() helpers. While there, also add a comment. This does not cause any functional change. Cc: Catalin Marinas Cc: Will Deacon Cc: Ard Biesheuvel Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Reviewed-by: David Hildenbrand Signed-off-by: Anshuman Khandual Acked-by: Catalin Marinas Link: https://lore.kernel.org/r/1614921898-4099-3-git-send-email-anshuman.khandual@arm.com Signed-off-by: Will Deacon

arm64/mm: Fix pfn_valid() for ZONE_DEVICE based memory

2021-03-08T18:04:00Z

pfn_valid() validates a pfn but basically it checks for a valid struct page backing for that pfn. It should always return positive for memory ranges backed with struct page mapping. But currently pfn_valid() fails for all ZONE_DEVICE based memory types even though they have struct page mapping. pfn_valid() asserts that there is a memblock entry for a given pfn without MEMBLOCK_NOMAP flag being set. The problem with ZONE_DEVICE based memory is that they do not have memblock entries. Hence memblock_is_map_memory() will invariably fail via memblock_search() for a ZONE_DEVICE based address. This eventually fails pfn_valid() which is wrong. memblock_is_map_memory() needs to be skipped for such memory ranges. As ZONE_DEVICE memory gets hotplugged into the system via memremap_pages() called from a driver, their respective memory sections will not have SECTION_IS_EARLY set. Normal hotplug memory will never have MEMBLOCK_NOMAP set in their memblock regions. Because the flag MEMBLOCK_NOMAP was specifically designed and set for firmware reserved memory regions. memblock_is_map_memory() can just be skipped as its always going to be positive and that will be an optimization for the normal hotplug memory. Like ZONE_DEVICE based memory, all normal hotplugged memory too will not have SECTION_IS_EARLY set for their sections Skipping memblock_is_map_memory() for all non early memory sections would fix pfn_valid() problem for ZONE_DEVICE based memory and also improve its performance for normal hotplug memory as well. Cc: Catalin Marinas Cc: Will Deacon Cc: Ard Biesheuvel Cc: Robin Murphy Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Acked-by: David Hildenbrand Fixes: 73b20c84d42d ("arm64: mm: implement pte_devmap support") Signed-off-by: Anshuman Khandual Acked-by: Catalin Marinas Link: https://lore.kernel.org/r/1614921898-4099-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Will Deacon

Merge tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

2021-02-26T18:28:35Z

Pull RISC-V updates from Palmer Dabbelt: "A handful of new RISC-V related patches for this merge window: - A check to ensure drivers are properly using uaccess. This isn't manifesting with any of the drivers I'm currently using, but may catch errors in new drivers. - Some preliminary support for the FU740, along with the HiFive Unleashed it will appear on. - NUMA support for RISC-V, which involves making the arm64 code generic. - Support for kasan on the vmalloc region. - A handful of new drivers for the Kendryte K210, along with the DT plumbing required to boot on a handful of K210-based boards. - Support for allocating ASIDs. - Preliminary support for kernels larger than 128MiB. - Various other improvements to our KASAN support, including the utilization of huge pages when allocating the KASAN regions. We may have already found a bug with the KASAN_VMALLOC code, but it's passing my tests. There's a fix in the works, but that will probably miss the merge window. * tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits) riscv: Improve kasan population by using hugepages when possible riscv: Improve kasan population function riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization riscv: Improve kasan definitions riscv: Get rid of MAX_EARLY_MAPPING_SIZE soc: canaan: Sort the Makefile alphabetically riscv: Disable KSAN_SANITIZE for vDSO riscv: Remove unnecessary declaration riscv: Add Canaan Kendryte K210 SD card defconfig riscv: Update Canaan Kendryte K210 defconfig riscv: Add Kendryte KD233 board device tree riscv: Add SiPeed MAIXDUINO board device tree riscv: Add SiPeed MAIX GO board device tree riscv: Add SiPeed MAIX DOCK board device tree riscv: Add SiPeed MAIX BiT board device tree riscv: Update Canaan Kendryte K210 device tree dt-bindings: add resets property to dw-apb-timer dt-bindings: fix sifive gpio properties dt-bindings: update sifive uart compatible string dt-bindings: update sifive clint compatible string ...

arm64, numa: Change the numa init functions name to be generic

2021-01-14T23:08:54Z

This is a preparatory patch for unifying numa implementation between ARM64 & RISC-V. As the numa implementation will be moved to generic code, rename the arm64 related functions to a generic one. Signed-off-by: Atish Patra Acked-by: Catalin Marinas Signed-off-by: Palmer Dabbelt

arm64: Remove arm64_dma32_phys_limit and its uses

2021-01-12T17:49:25Z

With the introduction of a dynamic ZONE_DMA range based on DT or IORT information, there's no need for CMA allocations from the wider ZONE_DMA32 since on most platforms ZONE_DMA will cover the 32-bit addressable range. Remove the arm64_dma32_phys_limit and set arm64_dma_phys_limit to cover the smallest DMA range required on the platform. CMA allocation and crashkernel reservation now go in the dynamically sized ZONE_DMA, allowing correct functionality on RPi4. Signed-off-by: Catalin Marinas Cc: Chen Zhou Reviewed-by: Nicolas Saenz Julienne Tested-by: Nicolas Saenz Julienne # On RPi4B

arm64: mm: Fix ARCH_LOW_ADDRESS_LIMIT when !CONFIG_ZONE_DMA

2021-01-04T11:06:13Z

Systems configured with CONFIG_ZONE_DMA32, CONFIG_ZONE_NORMAL and !CONFIG_ZONE_DMA will fail to properly setup ARCH_LOW_ADDRESS_LIMIT. The limit will default to ~0ULL, effectively spanning the whole memory, which is too high for a configuration that expects low memory to be capped at 4GB. Fix ARCH_LOW_ADDRESS_LIMIT by falling back to arm64_dma32_phys_limit when arm64_dma_phys_limit isn't set. arm64_dma32_phys_limit will honour CONFIG_ZONE_DMA32, or span the entire memory when not enabled. Fixes: 1a8e1cef7603 ("arm64: use both ZONE_DMA and ZONE_DMA32") Signed-off-by: Nicolas Saenz Julienne Link: https://lore.kernel.org/r/20201218163307.10150-1-nsaenzjulienne@suse.de Signed-off-by: Catalin Marinas

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

2020-12-18T18:57:27Z

Pull more arm64 updates from Catalin Marinas: "These are some some trivial updates that mostly fix/clean-up code pushed during the merging window: - Work around broken GCC 4.9 handling of "S" asm constraint - Suppress W=1 missing prototype warnings - Warn the user when a small VA_BITS value cannot map the available memory - Drop the useless update to per-cpu cycles" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Work around broken GCC 4.9 handling of "S" constraint arm64: Warn the user when a small VA_BITS value wastes memory arm64: entry: suppress W=1 prototype warnings arm64: topology: Drop the useless update to per-cpu cycles

Merge branch 'akpm' (patches from Andrew)

2020-12-15T20:53:37Z

Merge misc updates from Andrew Morton: - a few random little subsystems - almost all of the MM patches which are staged ahead of linux-next material. I'll trickle to post-linux-next work in as the dependents get merged up. Subsystems affected by this patch series: kthread, kbuild, ide, ntfs, ocfs2, arch, and mm (slab-generic, slab, slub, dax, debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, hmm, vmalloc, documentation, kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction, oom-kill, migration, cma, page-poison, userfaultfd, zswap, zsmalloc, uaccess, zram, and cleanups). * emailed patches from Andrew Morton : (200 commits) mm: cleanup kstrto*() usage mm: fix fall-through warnings for Clang mm: slub: convert sysfs sprintf family to sysfs_emit/sysfs_emit_at mm: shmem: convert shmem_enabled_show to use sysfs_emit_at mm:backing-dev: use sysfs_emit in macro defining functions mm: huge_memory: convert remaining use of sprintf to sysfs_emit and neatening mm: use sysfs_emit for struct kobject * uses mm: fix kernel-doc markups zram: break the strict dependency from lzo zram: add stat to gather incompressible pages since zram set up zram: support page writeback mm/process_vm_access: remove redundant initialization of iov_r mm/zsmalloc.c: rework the list_add code in insert_zspage() mm/zswap: move to use crypto_acomp API for hardware acceleration mm/zswap: fix passing zero to 'PTR_ERR' warning mm/zswap: make struct kernel_param_ops definitions const userfaultfd/selftests: hint the test runner on required privilege userfaultfd/selftests: fix retval check for userfaultfd_open() userfaultfd/selftests: always dump something in modes userfaultfd: selftests: make __{s,u}64 format specifiers portable ...

arm, arm64: move free_unused_memmap() to generic mm

2020-12-15T20:13:42Z

ARM and ARM64 free unused parts of the memory map just before the initialization of the page allocator. To allow holes in the memory map both architectures overload pfn_valid() and define HAVE_ARCH_PFN_VALID. Allowing holes in the memory map for FLATMEM may be useful for small machines, such as ARC and m68k and will enable those architectures to cease using DISCONTIGMEM and still support more than one memory bank. Move the functions that free unused memory map to generic mm and enable them in case HAVE_ARCH_PFN_VALID=y. Link: https://lkml.kernel.org/r/20201101170454.9567-10-rppt@kernel.org Signed-off-by: Mike Rapoport Acked-by: Catalin Marinas [arm64] Cc: Alexey Dobriyan Cc: Geert Uytterhoeven Cc: Greg Ungerer Cc: John Paul Adrian Glaubitz Cc: Jonathan Corbet Cc: Matt Turner Cc: Meelis Roos Cc: Michael Schmitz Cc: Russell King Cc: Tony Luck Cc: Vineet Gupta Cc: Will Deacon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

arm64: Warn the user when a small VA_BITS value wastes memory

2020-12-15T16:27:48Z

The memblock code ignores any memory that doesn't fit in the linear mapping. In order to preserve the distance between two physical memory locations and their mappings in the linear map, any hole between two memory regions occupies the same space in the linear map. On most systems, this is hardly a problem (the memory banks are close together, and VA_BITS represents a large space compared to the available memory *and* the potential gaps). On NUMA systems, things are quite different: the gaps between the memory nodes can be pretty large compared to the memory size itself, and the range from memblock_start_of_DRAM() to memblock_end_of_DRAM() can exceed the space described by VA_BITS. Unfortunately, we're not very good at making this obvious to the user, and on a D05 system (two sockets and 4 nodes with 64GB each) accidentally configured with 39bit VA, we display something like this: [ 0.000000] NUMA: NODE_DATA [mem 0x1ffbffe100-0x1ffbffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x2febfc1100-0x2febfc2fff] [ 0.000000] NUMA: Initmem setup node 2 [] [ 0.000000] NUMA: NODE_DATA [mem 0x2febfbf200-0x2febfc10ff] [ 0.000000] NUMA: NODE_DATA(2) on node 1 [ 0.000000] NUMA: Initmem setup node 3 [] [ 0.000000] NUMA: NODE_DATA [mem 0x2febfbd300-0x2febfbf1ff] [ 0.000000] NUMA: NODE_DATA(3) on node 1 which isn't very explicit, and doesn't tell the user why 128GB have suddently disappeared. Let's add a warning message telling the user that memory has been truncated, and offer a potential solution (bumping VA_BITS up). Signed-off-by: Marc Zyngier Acked-by: Mark Rutland Link: https://lore.kernel.org/r/20201215152918.1511108-1-maz@kernel.org Signed-off-by: Catalin Marinas